Add function to setup/reset lite monitor filters
whenever lite monitor mode is enabled/disabled
respectively through cmd line.
Also add function to configure rx header tlv dma length.
Change-Id: Ia5d8bc36e1d033b3e15737bb6b9854f6a7cdd5df
CRs-Fixed: 3143570
With new configuration changes for enable_peer_extended stats, update
code to peer_extended_stats naming for clean codebase.
Change-Id: I97a7ee331042232098382683fefebd05e6b099c3
CRs-Fixed: 3149920
Populate punctured pattern from WIFIPHYRX_COMMON_USER_INFO_E
And get puncture type from puncture pattern.
Change-Id: I3a5ba4c7c478d15cf3c3cfdcfd0573775ae342ca
CRs-Fixed: 3166010
This feature can be enabled runtime using sysfs interface.
Support is added to dump and clear the histogram stats.
The lower delay regions has to be more granular to indicate any
medium related issues for time sensitive XR applications.
Change-Id: I0a44a54d12d92ce016de349810cb2bedebaf9a58
CRs-Fixed: 2981006
Populate rate index in user specific rx ppdu indication.
Also correct the computation of total retries in rx ppdu indication.
Change-Id: I07c55260def9d2f1490729b6390bca3d98085c63
CRs-Fixed: 3156428
Add support to send unit test command to FW to dump
stats on suspend failure due to pending tx completions.
Change-Id: I6afb69a862c366c66a1e1f3dc009964272dfb75a
CRs-Fixed: 3151458
The per packet info feature can be enbaled to support enhanced
stats independent of mesh mode.
Change-Id: I852e7a958c520901b6f418d30deb53fa2f68fb68
CRs-Fixed: 3079000
Display phyrx aborted undecoded frame count and the aborted
reason statistics as part of pdev rx mon stats.
Change-Id: Ia86074e62af3179855734b47801715abd1899fe1
CRs-Fixed: 3123540
Update enhanced Tx stats from Tx HTT PPDU completion path in WKK.
Define and use function pointers for architecture specific
functionality.
Change-Id: I4ba443647dbd81c83e899c0f88c5d9a4cc695e14
CRs-Fixed: 3132255
Define macro for maximum mcs values for 11AX and 11BE.
Also move bandwidth enums to cdp header file.
Change-Id: Ic24b9fa459b160702fa35162955c6bcdf678c97f
CRs-Fixed: 3134964
Enable usage of delta_tsf for SAWF. This will be used to compute tx
delay. Also, add support to update sawf stats in tx completion.
Change-Id: Idab7fbd5217175167ecdeee21cf5dc9daf1415d6
CRs-Fixed: 3135773
The monitor status ring is configured for filtering
in undecoded phy error packets. Each phy error can
be controlled using a specific error mask configuration.
Added below cfg80211tool command to configure phy error
mask for filtering undecoded phy error packets.
cfg80211tool wifix set_phyrx_error_mask mask_0to31 mask_32to63
cfg80211tool wifix get_phyrx_error_mask
Change-Id: I5e4f6a49458cc534d6d1d0f7f2a7424f3cc747b4
Added change:
1. Set/reset RXDMA MON STATUS ring filter setting and send HTT
message to capture undecoded frame
2. Handle undecoded frame to update cdp_rx_indication_ppdu structure
from hal ppdu_info rx status and generate WDI event to deliver it
to upper layer
Change-Id: I14485f28333b113b5a2fab639611551c2b08af2b
For 1x1 DBS case, host also need to configure max_mac_rings
as 2 and initialize each RX ring, currently host only consider
2x2 DBS case.
Check DBS capable instead of 2x2 DBS capable only.
Change-Id: Ic2d4fda9be245a3d0448b6b87ba8676f41d9187e
CRs-Fixed: 3129165
2x_pdev changes are include for support new IPA API's
and change the existing API's argument to support new
parameter which is ipa handle, create a new API to get
the IPA hdl from IPA component in DP
Change-Id: I3d2b378620dbd1e64d295623534126e0eebc2d28
Adding SAWF ops for CDP and adding SAWF context
to DP peeer.
Add calls to initialize DP SAWF peer context
when DP peer is created.
Change-Id: I7efb89ae18a28c8b070ad9fcee7754553caa7ff3
CRs-Fixed: 3118160
Add change to fetch and save the WMI service capability of FW to
support multi AST delete using service bit
Change-Id: Iba1af7c230574ae68086357cbb49ae3ca3d944e4
CRs-Fixed: 3118892
Segregate the stats among dp_peer, dp_txrx_peer and dp_mon_peer
structures.
Segregation is done as per below:
* Move stats updated in per pkt path to dp_txrx_peer
* Consider stats updated purely in per pkt path as per_pkt_stats
* Consider stats for which there is an alternate path of
updation as extd_stats
* Move delay stats and jitter stats to dp_txrx_peer
* Maintain calibrated stats in dp_peer
* Move rdkstats_ctx from dp_peer to dp_mon_peer
* Move invalid peer from dp_pdev to dp_mon_pdev
As per the above segregation, if there is not support for
alternate path of stats updation, then stats in dp_txrx_peer is
combination of per_pkt_stats and extd_stats and dp_mon_peer
does not hold any stats.
If support is there, then dp_txrx_peer holds only per_pkt_stats and
dp_mon_peer holds extd_stats.
Change-Id: I2eb81d1b93a178985c05ff4f6557a173cc8a262d
CRs-Fixed: 3092123
Move the stats parameters from the dp_peer which are used
in per packet path to txrx_peer
Change-Id: Ieb68b6950740791b37bbd2bfdc4815c3d7bc4834
CRs-Fixed: 3095637
Add support to update tsf timestamp on driver entry and
exit in data packet. This helps debug latency issue in
XR usecases
Change-Id: I9c966c1b8cb09dc5eab6104fdad36c19a1d68045
CRs-Fixed: 3090108
When validating MMIE, if PN error is found, track it using relevant
statistics. Defined WMI_HOST_RXERR_PN to flag such PN errors.
Change-Id: Icb1fe9a653f67611539b5cb463adfceadedae38e
Add function pointers to free buffer address stored in status buffer
and support tx monitor in legacy and Waikiki flow.
Change-Id: I28612d388009292ff751fe514183fb801909f485
Introduce a new flag "BE_PKTLOG_SUPPORT" for beryllium specific
pktlog support.
Change-Id: If91156541b322905ad5d97cf2d9d7ae687290ecb
CRs-Fixed: 3115832
use dma_inv_range call instead of dma map and unmap
APIs during replenish and reap. This complete code is
under a compile time macro.
before change: 4160Mbps @ 96.5% (core 3)
after change: 4160Mbps @ 90.5% (core 3)
Change-Id: I61bca349a369ace06cd86f353880108cee013cb1
Add more stats to cdp_soc_stats interface structure to ship it to
userspace. Move soc, delay and jitter stats apis from dp_main.c to
dp_stats.c.
Change-Id: Idb7f8b706e8744350d7fb2e8802d9303b3f25b5c
CRs-Fixed: 3084586
Add support to set enhanced stats in pdev via cdp pdev set param
functionality.
Change-Id: I4c271dfc71511a0869a795c2adbb0e0eb55ba9d0
CRs-Fixed: 3108103
The following issues are fixed with this change-
1. Sojourn stats were printing incorrect values
2. RSSI values were junk numbers
Change-Id: Ibed73cf370a309bf9db5baad37a0e8261c58463b
