Currently in SAP and STA mode the driver advertises TWT
capabilities in the HE capabilities IE based on the below ini
values irrespective of the master ini "enable_twt" to enable
the twt feature:
"he_twt_requestor","he_twt_responder", "he_bcast_twt",
"he_flex_twt_sched".
So even with the ini is disabled, twt capabilities are advertised
Advertise TWT capability only if "enable_twt" ini is true.
Change-Id: Iae3a98ee339f3859391e0deb64ddd354634b0cbf
CRs-Fixed: 2844516
In AP side power off/on case, AP security has been cleanup.
The STA side might still cache PMK ID in driver and it will always
use PMK cache to connect to AP and get continuously connect failure
in SAE security. This function is to detect AP off based on FW
reported BMISS event. Meanwhile judge FW reported last RSSI > roaming
Low rssi and not less than 20db of host cached RSSI to avoid
some false alarm such as normal DUT roll in/out roaming.
Change-Id: I5d8ec9e9d4f8a44178b113d370799fe2bc0373fb
CRs-Fixed: 2841481
wpa_supplicant/framework sends different vendor specific IEs in
connect request. Currently driver is parsing the IEs and appending
specific IEs to the assoc request frame. But all vendor specific
IEs are supposed to be sent in the assoc request. Extract all vendor
specific IEs and append at the end of the frame.
MBO IEs are expected to be present at the end of the frame.
So append rest of the vendor IEs just before MBO IE.
This is a followup change for the change
Ia6423bb43b2ac294541c2485f5ed45d14af6553d to ensure the
"appending vendor IEs to assoc request feature is still intact".
Change-Id: Id788153ceb30c67f7ca9de9f3feea2d610cb21cb
CRs-Fixed: 2851362
The change I3d49c72a31d142ef3b14b439af2ae4cd8be059ea adds support
to append the vendor IEs received from userspace to assoc request.
But this also fixes a memleak in mbo IE handling. It's better split
these two as the feature(appending vendor IEs to assoc request)
may not be needed on all branches but the memleak fix is needed on
all the builds which support MBO.
So, revert this change and raise these as two separate changes.
Change-Id: Ia6423bb43b2ac294541c2485f5ed45d14af6553d
CRs-Fixed: 2851356
Cleanup the struct sCsrNeighborRoamControlInfo and move params in
vdev ext object.
Change-Id: If5a490c68137622838afc831a4da0e1da7fa49c4
CRs-Fixed: 2850991
Add legacy pointer in connection manager context to use for RSO
and other connection manager legacy operations.
Change-Id: Ibc665f53d77aebb3f248fedbdffd1cfe86492b25
CRs-Fixed: 2845980
Enable periodic time sync between host and fw by setting
gRemoveTimeStampSyncCmd to 0.
Change-Id: I52168ad6d065262c433c801716eec0d7782bf6e8
CRs-Fixed: 2845017
Enable 10th bit of CFG_BTM_ENABLE ini to forward BTM request
frame to upper layers when frame contains MBO assoc retry
attribute. when supplicant receives this MBO frame it will
use the frame info for blacklisting the AP so for the next
connection framework will avoid this AP.
Change-Id: I9a675cc01769c38ad5be26ea5fd28ada8dc03546
CRs-Fixed: 2843323
FW considers 9th bit of CFG_BTM_ENABLE for btm query
with candidate list which is not mentioned in ini
documentation.
Change-Id: I4fefdaa464e14c350d885107a28051fa0ad309f0
CRs-Fixed: 2839587
There are cases where only a few TWT roles may be required
to be enabled. For example TWT Requestor role alone or
TWT Respondor role alone. Also, it could be unicast TWT only
and disable broadcast TWT.
Support broadcast TWT configuration in requestor and responder
role by adding new INI.
Extend the use of existing requestor and responder INIs to further
enable requestor and responder roles itself.
Change-Id: I3dfa196edfda9cafd01fa56c0bb6ce73e27b4144
CRs-Fixed: 2828718
The event WMI_ROAM_STATS_EVENTID is received after
every roam, once the roam synch complete is sent by the host.
This event contains details regarding the roam RSSI TH reset.
This helps in debugging/understanding the scenario when roam
failure happens.
Print the info received related to roam RSSI TH reset into kmsg.
Change-Id: Ibee9fc6e9220511d6679efb24080c79bcd807ab8
CRs-Fixed: 2826321
Currently when Adaptive 11R feature is disable via ini
then user space parse Vendor Specific IE and trigger
connection in FT-PSK/EAP based on STA configured key
mgmt, but due to feature disabled via ini it failed
to connect AP and trigger Assoc reject to user space.
To overcome this advertise Adaptive 11R supported feature
bit to user space and based on this feature bit user space
parse, trigger connection in FT-PSK/EAP other wise fallback to
PSK/EAP.
Change-Id: I5d67a0cb77c3f39328467a6313a7a795e6a7a4d8
CRs-Fixed: 2785878
Firmware sends peer create confirmation to detect duplicate peer
on other vdev. If the status field in the
wmi_peer_create_conf_event_fixed_param is 0, peer creation is
successful.
Add support to handle the peer create confirmation command for
sta mode. For roaming scenario, the peer will be internally
created by the firmware, so bail out after creating object
manager peer/datapath peer without sending the peer create
command similar as the current implementation.
For SAP/P2P Go mode the legacy peer create path will be used.
Proceed to do post linkstate change if status is success, else
do vdev stop and indicate failure to upper layers
Change-Id: I0abbd70dd509f2b9afa8d4d7db1774e289d1e021
CRs-Fixed: 2747870
Add new ini "monitor_mode_concurrency" to support this feature
and introduce policy manager api's for concurrency checks.
Change-Id: I35ee1fece0a6f9ae8fe340b0598c4a3e20b17e82
CRs-Fixed: 2814523
Add logic to
- Check if connect req freq is 6Ghz and security
is not allowed for 6Ghz, reject connect.
- Ignore 6Ghz APs if connect req security is invalid
for 6Ghz
Also added user config key_mgmt_mask_6ghz mask
to allow specific AKMs, by default all are allowed.
Add added user config check_6Ghz_security to enable
security checks as per spec.
Change-Id: Iada7bb685b272e26cff7e89cf64d181ed6eb48a4
CRs-Fixed: 2820358
The event WMI_ROAM_STATS_EVENTID is received after
every roam, once the roam synch complete is sent by the host.
This event contains details regarding the btm response.
This helps to debug the scenario when roam failure happen.
Print the info received related to roam scan type & roam status
info into kmsg.
Change-Id: Idd688eb4d1e699573fa1e243873c30ffdc5bf96f
CRs-Fixed: 2794555
Move ini CFG_VENDOR_ROAM_SCORE_ALGORITHM from qcacld-3.0 to qcacmn part.
from qcacld-3.0: mac_ctx->mlme_cfg->roam_scoring
to qcacmn: mlme_psoc_obj->psoc_cfg.score_config.
Change-Id: I318f0d516ce699c061f268116e1cbf79fcc9e23a
CRs-Fixed: 2806090
Move the logic to get HT and VHT caps in LIM from CSR also store
VHT and HT caps in vdev mlme instead of csr session.
Change-Id: I29b8e836a79a4a9eda5088c0eb2e0bf48d616de2
CRs-Fixed: 2807209
INI he_twt_requestor and he_twt_responder should be able to disable/enable
twt requestor and twt responder.
Make them work.
Change-Id: I5e091a2f04cca1817f1a2db6358f141c2eaf103d
CRs-Fixed: 2798800
Host is not enabling WTC_BTM roam trigger via
roam_enable trigger command
(WMI_ROAM_ENABLE_DISABLE_TRIGGER_REASON_CMDID). Because
of this roam scan is not triggered and BTM response is
not sent to AP.
Fix is to enable WTC BTM by default
Change-Id: Ie33f8a298818955c886094d6f703b9603ab5b00e
CRs-Fixed: 2795665
To discard 5G candidates based on RSSI threshold, Introduce
a new INI "min_rssi_for_2g_to_5g_roam" to configure the RSSI
for High RSSI Trigger.
Min: -120
Max: 0
Default: -70
Change-Id: If4545296ef1b53d18b8ae4abf12d450f5e690240
CRs-Fixed: 2789017
Currently, QCA_SETBAND_AUTO is backwards compatible, so it is set
to include only 2G and 5G bands. Update this to include 6G bands
as well. Also update the band capability INI to have the default
value 0 include 6G bands.
Change-Id: I98067c18e939ff4c1e7b1e778b020b44409b5b34
CRs-fixed: 2799883
Change the default value of in CFG_REPORT_MAX_LINK_SPEED
to CFG_STATS_LINK_SPEED_REPORT_ACTUAL instead of
CFG_STATS_LINK_SPEED_REPORT_MAX_SCALED so that
gReportMaxLinkSpeed uses the default value as zero which
was previously 2.
Change-Id: I459c807b1738e21a28c5b51e2eeb6a4bccb78662
CRs-Fixed: 2787888
Add support to handle the nl80211 attribute -
QCA_ATTR_ROAM_CONTROL_TRIGGERS_SCAN_SCHEME. Send RSO update to
firmware if roam scan scheme value is received via the nl80211
attribute QCA_ATTR_ROAM_CONTROL_TRIGGERS_SCAN_SCHEME over the
QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD subcommand.
Change-Id: If21281245097648380990b9218a722691279f598
CRs-Fixed: 2785256
The bit 5, 4, 3 are used differently in case of solicited and
unsolicited btm request. Update the description of the ini
param to provide clarity on the usage of these bits.
Change-Id: Ic9a596710da6b4692d578206bbd783f784a230fb
CRs-Fixed: 2787597
In OWE transition mode, the AP advertises one Hidden SSID and one
normal ssid and the OWE capable STA connects to the OWE supported
hidden SSID. When connecting to the hidden SSID, if the AP sends
beacon for the unicast probe request sent by driver before
anouncing join success, then the beacon NULL ssid gets updated to
the kernel. Then after successful association, while indicating
the connection successs to the kernel, the current bss is not
filled as wlan_cfg80211_get_bss() is called with the actual ssid
and not the NULL ssid.
Due to this when supplicant sends install key command for this
bss, kernel returns error and set_key always fails.
Wait for the probe response from the AP for the unicast probe
request sent before announcing join success and drop the beacon
received from the AP so that the driver
fills the proper ssid to the kernel bss entry and same ssid gets
used in association completion handler.
Change-Id: Icded0af5d45d3281ab4304bf166bdc318aa7a942
CRs-Fixed: 2782618
For STA+P2P GO case, DUT sets operational rates when connecting to AP
as STA, and overwrites it when DUT forming P2P connection as P2P GO.
So, add this change to save operational rates to vdev mlme legacy
object, and avoid to overwrite for other inferfaces.
Change-Id: I2bfbecbc9bc50b8943b1e3de516782e70b125ce2
CRs-Fixed: 2773943
Add ini he_mcs_12_13_support which will be used to enable
or disable 4K QAM MCS rates.
This ini can be used to set. MCS 12 and 13 for 2.4Ghz and
5Ghz. First 16 bits(0-15) is for 2.4ghz and next 16 bits
is for 5Ghz. Of 16 bits the higher, first 8 bits represent
BW less than or equal 80Mhz (<= 80Mhz) and higher 8 bits
represent BW greater than 80Mhz (> 80Mhz). nth bit in octet
represents support for nth NSS [n=1:8].
Def value is 0xFFFFFFFF which enable MCS 12 and 13 for all
NSS and BW.
Also, enable 4K QAM MCS only when this ini is enabled and
firmware also supports it.
Change-Id: I8375203735d8b07ef4ff86be2213da127be4e556
CRs-Fixed: 2762230
Reduce default value of gMaxLIModulatedDTIM from 10 to 5
to shorten the listen interval. It provides better
connectivity when AP has a large DTIM Period or
Beacon Interval.
Also, move the ini definition to sta header file from
sap header file.
Change-Id: I9661c6fc623949cf8b260043e8da7448b496d57f
CRs-Fixed: 2780070
Currently, gRoamBeaconRssiWeight is not used in HOST or
FW.
Remove unused roam ini param gRoamBeaconRssiWeight.
Change-Id: Ida6ddb8ca5805f819c4d3f7e6ed96c705fa6594f
CRs-Fixed: 2767533
Pass rx data rssi triggers and rx time to firmware.
Add log in wmi to narrow down host and firmware issue.
Change-Id: I255e02ab8f2c88a29619a49d9c2055bdaa75642a
CRs-Fixed: 2768053
FW triggers roaming based on the RSSI score of AP(s) available
after background scan. Currently, the host does not configure
the value of bg_rssi_threshold RSSI. This results in ping-pong
roaming after background scan, even though candidate AP
RSSI is not better than 5dbm than connected AP.
Fix is to configure the value of bg_rssi_threshold via new
INI "bg_rssi_threshold" and configuring default value of
INI as 5dB.
Min: 0
Max: 100
Default: 5
Change-Id: Ib710e294c8b33ff4903d41453e3b55f02daf53ae
CRs-Fixed: 2763962
SAE Public Key (SAE-PK) authentication is an extension of SAE. Host adds
support for SAE-PK APs roam score which host uses to select AP for initial
connection and roaming.
Change-Id: Id8c420950bb8c1d11db5a26aa860e280bcb672d1
CRs-Fixed: 2769372
Currently, the APIs related to setting the preferred channel list is
in the SME module. Move these APIs to the policy manager so they can
be accessed from non-legacy modules.
Change-Id: Icc487dd2a0014e59db9c2df729b875f58e3e975e
CRs-fixed: 2766863
3 ini:
roam_data_rssi_threshold_triggers
roam_data_rssi_threshold
rx_data_inactivity_time
If there's rx activity during latest rx_data_inactivity_time
and avg of data_rssi is better than roam_data_rssi_threshold, then
suppress roaming triggered by roam_data_rssi_threshold_triggers: low
RSSI or bg scan.
Change-Id: I5b41c4119e61392b50e52ab8ccb8650e5758f3b3
CRs-Fixed: 2768053
Set default value of INI enable_subfee_vendor_vhtie to 1
to enable SU Bformee in vendor VHTIE by default.
Change-Id: I8a916495dd5c6ddfe78840dc6f35976fbdbbf8ba
CRs-Fixed: 2769257
This is a change for typo about LFR configuration. It uses ini -
"mawc_roam_ap_rssi_threshold", the correct is
"mawc_roam_rssi_high_adjust".
Change-Id: I7e29287b84559f58f13d191d6288534196b894da
CRs-Fixed: 2768752
Currently INI: gFirstScanBucketThreshold is not used
while LFR2/LFR3 roaming.
Remove unused INI gFirstScanBucketThreshold
Change-Id: Ifa909fc57d3ac3da696369fcffc390826f393b44
CRs-Fixed: 2767372
Add changes to send roam scan mode over RSO start/stop/update_cfg
from connection manager. Update the roaming params and roam scan
params to new structure.
Refine send_roam_scan_offload_mode_cmd_tlv().
Change-Id: I6adce2e8a24ece93a079032d0e66760393fcdccd
CRs-Fixed: 2766023
Increase max sae auth frame retry count to 3 since total SAE auth
timeout is 5s.
Change-Id: I5902cc3411f713eaeed5ef7754fe7fe8e590b459
CRs-Fixed: 2765211
In some instances, AP does not respond to probe req
causing join timeout at STA and no connection.
To solve this,send multiple probe requests(every 200ms)
to AP until join failure timeout(1 sec) expiry,
if single bssid case retry same bss again
(configurable via ini, max allowed tries 2).
Change-Id: I7a7eeedcc24db1a74cd186ff957c638a39cdea6d
CRs-Fixed: 2763815
