Remove SW WAR in rawmode for qca8074v2 target. Added flag in
vdev structure which will be filled during vdev attach time.
Based on the flag war is applied.
Change-Id: Id91d6359b0a575b1f2b1222e56ac93a0e08a3c73
CRs-Fixed: 2296584
Tie increment and decrement PM usage count to descriptor allocation
and free instead of HW enqueue and TX completion since allocation
and free will be the most accurate places to track if the packet
has been sent or not.
Change-Id: Ia61c5bb26386d20590e87149d0fe88dba02d0fb7
CRs-fixed: 2302214
When running dptrace dump on Napier, observed that eapol TX counters
are not incremented. Reason is that in Lithium DP nbuf->cb is reset
before dp_tx_trace_pkt() is invoked while dptrace relies on nbuf->cb.
Fix is to move qdf_nbuf_reset_ctxt() after dp_tx_trace_pkt() so that
TX counters that rely on nbuf->cb can be captured.
Change-Id: I5048113e66e8742b8f1f321c07494a6dcf84256a
CRs-Fixed: 2290500
Clean up datapath component prints by correcting trace levels for
regularly occurring prints and removing newlines from converged
print APIs since qdf_trace_msh appends them by default.
Change-Id: Ie8fe319fcb737720f7400a165e134b6a18bd15b5
CRs-Fixed: 2243843
Add new ast_get_type API for DBDC repeater feature.
Add other changes required in WDS and MEC handling
required for DBDC repeater feature to function properly.
Apply sta kickout logic to handle roaming cases
only within same radio. For roaming across radios, DP should
rely on control path.
Change-Id: If9b35720082dd87de40827843a14238e818bc454
To consolidate the stats spread over across UMAC, OL_IF
layer and process at respective datapaths depending
on platforms.
Change-Id: I87d02c767a309e7aeef88a124567259debc1bba5
CRs-Fixed: 2283286
In existing code peer's mac address is populated in tx_capture
receiver address field. In case of multicast and broadcast packets
the packets is transmitted on BSS peer so in case of broadcast/multicast
packets the transmitter address is same as receiver address in tx_capture
header.
Add change to populate receiver address field with ethernet destination
address in case of bss peer is tranmit status.
Change-Id: Ie9495d51391454313b1697ecedb8e8dec0459565
CRs-Fixed: 2261473
Create separate individual hal_srng_table and hal register
offset in target specific source files. Create separate
functions for qca6290 and qca8074 for few hal rx tx
functions as the macro value differs between the chipsets.
Assign target specific hal tx, rx ops as part of hal_attach
and call respective hal tx, rx ops through callbacks.
Change-Id: Ibbf490c678c39fdd9d54191aad7aaec786db30ec
Account for tx.success and tx.comp_pkt stats counters
at peer level and propagate them to pdev level.
NSS stats need to be updated for all packets.
Change-Id: I18de95217690c9234060253671e0d5e1ef295e2a
CRs-Fixed: 2270816
structures
Rename osif_pdev to ctrl_pdev and os_if_vdev to ctrl_vdev in dp_pdev and
osif_dev structures respectively which are
pointing to objmgr_pdev and objmgr_vdev structures to maintain
uniformity
Change-Id: Ida95a1a90ea74513573f00c652338baee3df897a
CRs-Fixed: 2241362
In TX completion, we need to handle TSO frames release in below
sequence: Unmap skb -> free skb -> free this tx desc. Thus separate
skb unmapping and free tx descriptors for TSO logic.
CRs-Fixed: 2250960
Change-Id: I6979b4ec64e3f51bc6d8e485e843e2ab35eee86e
Add ol_txrx_completion_fp in ol_txrx_ops to provide support for
callback during TX completion.
Change-Id: I7af478636badd8f8562460cefaf5db56633df8e9
CRs-Fixed: 2253569
If host receive the tx completion with invalid tx_desc ID,
panic happened. add the tx desc ID check both on dp_tx_hw_enqueue
and dp_tx_comp_handler to know that how this invalid tx_desc ID
is generated by which reason of below two:
1. host tx desc is corrupted and fill in invalid id to TCL_DATA_CMD.
2. FW or HW generate invalid TX compl to host.
Change-Id: Id2b070697199b19f83e5d9fd89eadcfe0423d617
CRs-Fixed: 2243455
Enable raw mode cce classification only for packets for
which WEP bit is not set
Change-Id: I5249f197d5a3e00c73c6866011ba5f3a36868c0f
CRs-Fixed: 2132317
Enable multiqueue on VAP with 4 Tx and Rx queues in lithium.
In Rx path set the rx queue of skb based on the reo ring id on which it
is received.
In Tx path use the queue_mapping of skb to map to the hardware Tx ring
on which it has to be transmitted.
Change-Id: I103a21e91d1ed5c0e1d8441863d4fcd273b7bed9
There may be race condition in setting htt included when tx desciptors
getting prepared in two cpu cores. This is fixed by not setting the
bit globally.
Change-Id: I861cb2f0cf51a5a14a8fb6fbc6b64b00b82af675
CRs-Fixed: 2229350
In existing code vdev is getting referenced after being
freed, during pdev detach while releasing tx descriptors.
Add code to drain tx descriptiors during vdev detach.
Change-Id: I2ea447d5d0a5be6539fddacb4b1c0b5f4601a71e
CRs-Fixed: 2203070
Based on requirement from customer we have re-organised
AST specific and WDS specific code under different compile
time flags.
Change-Id: Icbb0dff7c2e7a2239d82c296468fa8d3e4f53021
In existing code M-copy feature was designed to provide
first 100bytes of payload of self BSS packets.
Add change to enable promiscusous mode and provide metadata and
100bytes of payload of all the packets received by the radio.
Change-Id: I5b1f168028a4fba3a24e9d2ccd0d68c246661d76
Change default DSCP-TID mapping table so that all possible TID
values can be used in transmit datapath.
Also propagate a fix from legacy Tx classification code required
to compute the offset of L3 header pointer correctly
Change-Id: Ia6426817410e67018491c0f4a8122bfae7a1cfe2
CRs-Fixed: 2197640
On napier AX, HK2.0 ast search is tied to lmac_id.
This ast search feature is added to support DBDC repeater usecase.
Assign lmac id 3 to search by default on all macs until more
formal per pdev changes are made. This enables 2g.
Change-Id: Ia06d9243bddd3f4943426d6b0de3f452a252d819
CRs-fixed: 2198431
Byte counts reported in HTT Tx PPDU indications is sum of MPDU bytes
(including the 802.11 header).In Rx, we derive byte count from per-MSDU
Rx indications and this does not include 802.11 header bytes.
This is causing mismatch in reporting of Tx and Rx byte counts.
Also PPDU TLV for mcast MPDUs is not giving correct multicast bytes count.
Move the byte count update for Tx also to per-MSDU indications to match
the behavior with Rx
CRs-Fixed: 2182576
Change-Id: I92e779661014b058ba98c830881ff8eded4ea6ff
Tx completion success counters are not being updated correctly.
Accumulate successful completions in tx_success variable.
Change-Id: I290e581e93e03ad23e349c9df7834174d6d3a787
CRs-Fixed: 2191599
On attach , allocation failed and in error handling
path it will call pdev_detach to free the resource,
resolved NULL pointer dereference which was causing
kernel panic.
Change-Id: I0fd5395fc2d4d2040049124094231dfa524a66b7
CRs-Fixed: 2192809
Increase debug level of mesh prints as in current debug level lot of
prints are coming.
Change-Id: Ic584c1bb17415521b66e656274e7283279c8cc61
CRs-Fixed: 2188324
Add APIs to be used by extended DP modules to attach/detach
their respective handles with Core DP module.
Change-Id: I63cf0883f7462a11b49666bda697c7e872d7b925
On Flushing txdesc resource on pdev detach caused null ptr
issue, resolved it by adding dummy function to not free desc
resources for mcl, as it is freed in vdev detach.
Change-Id: I9ab777571623c926b4ecbf9c95ba0837101eba26
CRs-Fixed: 2179488
Add support to transmit the original multicast frame (Control
frames) instead of dropping it in Tx path, if no snoop entries are
found for multicast address.
Change-Id: Ic8caeaf4b092f9368c8c2d76632941eb8d7bb9c8
Added CDP callback APIs so the DBDC repeater module
outside of cmn_dev can add, delete and update the AST
entries. Also with this change the sending of wds cmds
to fw is tied to adding AST, deleteing AST and updating
the AST entries.
Change-Id: I48d31962236860f50e16b771abaf3b8825b798df
On Firmware auto recovery , txdesc resources
might not be freed if f/w has not sent the
completion. Freeing those buffers in pdev
detach
Change-Id: I7d62258347f1fc9566fc8230564bcaf458ea4cc4
Set update_peer_cache, learning_frame bits in meta header for all
the frames that are sent to firmware.
Change-Id: Id8dac0007cc87f792859e5108ddfa77746166b49
CRs-fixed: 2180223
The map\unmap checking logic need to be revised. Before that, it
is needed this hotfix to unblock other test.
CRs-Fixed: 2175684
Change-Id: Ife8147526307924079be9081eaf17323f67b87c0
dp_tx_send_exception is an exception path that transmits frames
through FW by setting DP_TX_DESC_FLAG_TO_FW
Change-Id: Id6abfcd2bf060c4fe3aaca91634f3be501530a7e
CRs-Fixed: 2176814
