Same back to back link descriptor address/cookie is observed in
WBM idle link desc ring.
add duplicate link desc check when host
refill link descriptor to WBM through SW2WBM release ring,
also REO reinject ring.
Change-Id: Iaf9defd87670776fa9488d7f650efa3c08fefa60
CRs-Fixed: 2739879
The rx rings are relatively of smaller size. Any
duplicate entry sent by hardware cannot be back-tracked
by just looking at the ring contents alone.
Hence add a history to track the entries for the
REO2SW, REO exception and SW2REO ring.
Change-Id: I9b0b311950d60a9421378ce0fcc0535be450f713
CRs-Fixed: 2739181
DP RX changes to support RX buffer pool, this is a pre-allocated pool
of buffers which will be utilized during low memory conditions.
Change-Id: I8d89a865f989d4e88c10390861e9d4be72ae0299
CRs-Fixed: 2731517
On returning the msdu link descriptor to HW via WBM
release ring, the rx exception ring contents are not
zeroed. This could result in host reading stale ring
descriptor content in the scenario when HP is updated
even before the latest values are reflected in the ring
descriptor.
Fix is to set invalid bit in cookie for exception ring
descriptor and add cookie sanity check.
Change-Id: I01a294c92b260ebe8e584ef20e9550b1febec913
CRs-Fixed: 2730759
Remove uncessary msdu count check against msdu count in
mpdu desc info while processing REO Rx err pkts.
As per h/w team msdu count can be obtained from msdu link
desc instead of mpdu desc info.
SOC level Rx err stat rx.err.msdu_count_mismatch is
incremented to log this condition.
Change-Id: I4f7d2df7335778f2f2d28e542da17fc7f6970009
CRs-Fixed: 2729693
remove additional reap logic for SG buffers, as we
are also maintaining a state for SG buffers in dp_soc
structure
CRs-Fixed: 2722245
Change-Id: Ibec3007036e78a2ec1c5055244b6518f889e16a4
Rxdma decrypt errors are observed when the association
is in progress as AP sends encrypted data packets to
DUT-STA. As part of the rxdma error handling, excessive
prints are logged to console resulting in an assert.
Fix is to rate limit rxdma decrypt error related log
Change-Id: I2ef28c635d77e3acafd067b921cdb13c277756c7
CRs-Fixed: 2725335
Fix static analysis issue of rx_refill_buf_ring buffer overflow.
rx_refill_buf_ring length is different for WIN/MCL. For MCL length is 1,
WIN is 3. So rx_refill_buf_ring should always use index pdev->lmac_id to
replenish rx buffer for different MACs under MCL.
Change-Id: I00af069c09c01a81ae4aa54bad5beb79dc6fcff5
CRs-Fixed: 2703683
The DMA Map/UnMap was restricted to buffer size in rx process.
But the Map/UnMap API was not changed in rx error process, apply
this change in the rx error data path. So that there will be no
paging request error when rx data error happen.
Change-Id: I690e902ef5c05f216b2eb87de977fd0b45ecadab
CRs-Fixed: 2702369
FISA RX aggregation is not necessary for non-regular RX delivery
as it requires extra FISA flush and also may impact regular
dp_rx_process() RX FISA aggregation.
Add exception frame flag for non-regular RX delivery, so that
FISA path can identify this frame and bypass FISA RX.
Change-Id: Ic06cb72b516221754b124a673ab6c4f392947897
CRs-Fixed: 2680255
Add check for sg formation.
Only enable chfrag_cont and msdu_continuation if reo
error code is HAL_RX_WBM_ERR_SRC_REO or rxdma_err_code
is HAL_RXDMA_ERR_UNENCRYPTED.
Also chain all nbuf in case of sg in separate buffer
and finally loop through that. This is added because
sometime we dont get desc in sync with hw.
To avoid such mismatch, this buffer is added.
We will process nbuf only when all msdus has been
received.
Change-Id: I3b154a68955db61f3acaa0cb8d130c8918a3d450
CRs-Fixed: 2672126
In OOR error handling scenario, msdu is spread across
two nbufs. Due to this, there is a mismatch between
msdu count fetched from MPDU desc detatils and count
fetched from rx link descriptor.
Fix is to create frag list for the case where msdu
is spread across multiple nbufs.
Change-Id: I1d600a0988b373e68aad6ef815fb2d775763b7cb
CRs-Fixed: 2665963
Invalid peer handler does double free of nbuf and leads to crash.
To avoid this make nbuf->next NULL before calling dp_rx_null_q_desc_handle.
Change-Id: Ia3f92cb5136dbdbfeb1e9cda8a52c474456a4e0c
CRs-Fixed: 2655792
Use QDF_BUG instead of the qdf_assert. Since the qdf_assert is not
defined anymore.
Change-Id: I2bd46def51823829604b699321f9a02fcd3b07c6
CRs-Fixed: 2658545
There might be aggressive error logging in the dmesg if wbm_desc_rel_ring
is hang. So use the dp_info_rl instead of QDF_TRACE to reduce aggressive
logging to avaoid spin lock huge delay when processing the
reo_exception_ring.
Change-Id: I4622f28cd6d8771cf27643a867892b62860d1ddc
CRs-Fixed: 2648149
Pointer rx_msdu_link_desc returned from call to function
dp_rx_cookie_2_mon_link_desc which may be NULL and may be
de-referenced latter
CR-Fixed: 2645199
Change-Id: I9ccba61df9571fcc99c5d5493194d5ae43a71a7f
Support RX 2K jump/OOR frame handling from REO2TCL ring.
(a) configure REO error destination ring register to route 2K jump
/OOR frame to REO2TCL ring.
(b) for 2K jump RX frame, only accept ARP frame and drop others,
meanwhile, send delba action frame to remote peer once receive first
2K jump data.
(c) for OOR RX frame, accept ARP/EAPOL/DHCP/IPV6_DHCP frame, otherwise
drop it.
Change-Id: I7cb33279a8ba543686da4eba547e40f86813e057
CRs-Fixed: 2631949
In QCN9000, wbm release ring has msdu continuation bit
support for invld peer MPDUs. Host needs to form SG
buffer for packets with msdu continuation bit set
Change-Id: Ica03c78068d32d2c8dc609b9a50298b91dd48c0a
In case of decrypt de-auth need to be sent in case of
invalid. In valid peer case no action needed
Change-Id: I355093734c20a113fc1df0306b426eeb4f92ac88
pdev_id is being initialized with 0. Since 0 is valid pdev_id, though
pdev is not present for that id, it is being accessed.
Initialized pdev_id to 0xFF by default. Added checks on API to
detect valid pdev_id value corresponding to lmac_id
Change-Id: I2b2a38783615494ccc08e265702815f7e562214b
Packets delivered to FISA via exception err path doesnot have TLVs.
FISA handling requires additional TLVs. dp rx core handling
skips TLVs, save TLV length info in nbuf->cb so that TLVs
are recovered back in FISA.
Change-Id: I53fab2e19abcbf82697ea6f53a4ddf3ea0dd0699
CRs-Fixed: 2620844
For qcn9000, As part HW enhancements, PPDU_ID is sent
in reo_entrance_ring descriptor instead of RX_MPDU_START
tlv. Add support to read ppdu id from descriptor.
Modify existing hal API hal_rx_hw_desc_get_ppduid_get ()
arguments to pass RxDMA ring HW descriptor.
Usage:
a. Use hal_rx_hw_desc_get_ppduid_get () -
to get ppdu id from rx_tlv_hdr or hw descriptor based on target.
for qcn9000, this API gets ppdu_id from HW descriptor,
for other platforms, gets ppdu_id from rx_tv_hdr
b. Use hal_rx_get_ppdu_id () - to get ppdu_id from rx_tlv_hdr
Change-Id: I5838227c12cde50cbb2a9da7a0d8056b8b9b7ef5
Do not process or drop rxdma error decrpt frames. In case of
decrypt error the decryption is not proper and Rx OLE gets
corrupted bytes. So accessing these can lead to invalid buffers.
Change-Id: Idb3f942facf08fc26bde0fd9826db28955ca01d5
CRs-Fixed: 2613068
Rather than extracting msdu end pkt tlv information per field basis
during fast data path, extract msdu end pkt tlv information at once
and store in local structure.
Change-Id: I0877ba4f824d480cc0851c72090f010852d0d203
Drop the packet if msdu_done bit is not set while processing
rxdma err frames. This is not expected while reaping WBM RX
release ring.
Change-Id: I8776d15ea88319d7d955fdae90958648484dbda0
CRs-Fixed: 2603791
Maintain packet counters for each peer based on protocol. Following 3
protocols are supported
* ICMP (IPv4)
* ARP (IPv4)
* EAP
Change-Id: I56dd9bbedd7b6698b7d155a524b242e8cabd76c3
CRs-Fixed: 2604877
In the function that processes rxdma err frames add null check
before calling vdev callback function. If its valid then deliver
the skb to stack or free the skb.
Change-Id: I7c481eb8f702d9109c4a9f79db7e050ece6c3689
CRs-Fixed: 2607658
Add a framework to configure varying buffer size for both data and monitor
buffers.
For example, with this framework, the user can configure 2K SKB for Data
buffers, monitor status rings, monitor descriptor rings, monitor
destination rings and 4K SKB for monitor buffers through compile time.
Change-Id: I212d04ff6907e71e9c80b69834aa07ecc6db4d2e
CRs-Fixed: 2604646
Add the datapath changes for supporting
the newly added IPCI bus type for QCA6750
CRs-Fixed: 2597326
Change-Id: I27e3e9f746eb383e85c7345150bda03320d041b9
1. Move all LMAC rings to SOC from pDEV
2. Dynamically obtain lmac->pdev mapping while handling LMAC interrupts
Change-Id: Ib017d49243405b62fc34099c01a2b898b25341d0
There is excessive console logging in case of peer or vdev
null in mic error handling and wbm err processing in softirq
context which is delaying the interrupt to get enable and as a
result host is slow in reaping the wbm2sw3 ring. This leads to
wbm2sw3 ring full back pressure at FW and finally FW asserts.
As part of this change reduce reduce the error logging level from
err to info and for MSM info goes to the wifi logger logs and not
to the console.
Change-Id: I9b8be1feee5e807cecbe307b24a323e2b0ae631a
CRs-Fixed: 2596656
Add a check to validate invalid_peer_head_msdu before accessing
to avoid NULL dereference.
Change-Id: I9218bdd1100b48a32240546f380b1437ae72c406
CRs-Fixed: 2585651
Currently wlan host will re-inject defrag data with RBM 6 to
REO, this data buffer will go to REO-->REO2SW4-->IPA-->FW2RXDMA,
fix below issue introduced by this RX buffer path.
a. FW assert due to FW2RXDMA DMA address not 4 bytes aligned.
b. host skb double allocation due to qdf_nbuf_linearize() for frag skb.
c. Invalid RBM 6 for fragment RX due to RX buffer resue.
Change-Id: I36d831fc14b6b9aa0cea32682823de348f7eecd3
CRs-Fixed: 2591453
Link descriptor were getting freed by the pointer
of the previous freed link descriptor. This patch
fixes by copying the address of the current in a
local descriptor info and using it to free the
current.
Change-Id: I95e137ba5b1f0ad21b0e6fb39f6671e1d5b65ba6
CRs-Fixed: 2577624
Currently in dp_rx_wbm_err_process, we donot handle
HAL_REO_ERR_BAR_FRAME_2K_JUMP and HAL_REO_ERR_BAR_FRAME_OOR REO errors.
Add support for the same.
Change-Id: I22147fcd2d531c1e08214626796994593ffeb3a6
CRs-Fixed: 2580876
Local peer_id is being cleaned up across DP, HDD and PS/WMA.
So, any references to local peer_id/sta_id will be replaced
by peer mac address and all interactions between the layers
will be based on peer mac address.
Cleanup local peer id usage from DP APIs.
Change-Id: I930e1c6a09092a373c093239632d6f310fee18e2
CRs-Fixed: 2529041
Remove pdev and vdev control path handles from data path.
Instead send pdev_id and vdev_id along with opaque soc
handle in ol_if_ops.
Change-Id: I6ee083f07e464f283da0d70ada70a4e10e18e1b2
Add hal_rx_get_rx_sequence API to retrieve
rx sequence value based on the chipset.
Change-Id: I8377b96dfe04e9695a183482d9fcc4a804f845e0
CRs-Fixed: 2522133
Add the following support for QCA6490:
1. Initialize the qca6490_hal_hw_txrx_ops
2. Initialize the hw_srng_table
3. Attach hal_qca6490_attach
Change-Id: Ic53c520ef804eb4fbe1434c704e9040c83011d3d
CRs-Fixed: 2522133
Implement hal_rx_hw_desc_get_ppduid API based
on the chipset as the macro to retrieve
ppduid value is chipset dependent.
Change-Id: I7d3457d731ea486f04367f98f9f18d3f1c0fcfd7
CRs-Fixed: 2522133
Implement hal_rx_is_unicase API based
on the chipset as the macro to retrieve
is_unicast bit value is chipset dependent.
Change-Id: I38807f478c295309adf2a07ce9010b1bc04c734e
CRs-Fixed: 2522133
Implement hal_rx_mpdu_get_addr4 API based
on the chipset as the macro to retrieve
addr4 value is chipset dependent.
Change-Id: Ie35d01de1619a8ab540bb1b2019a15b436efb7d4
CRs-Fixed: 2522133
