Replace ol_if interface with WDI for dp stats updation to upper layer.
Define a new CDP API to get radiostats.
CRs-Fixed: 2326789
Change-Id: Ieaee2fe18fc9a0ad0e259e36f59529fe9bc4e208
1. Address out of bounds array access while
populating mcs rates.
2. Use cdp_sec_type enum inplace of htt_sec_type
for common code.
Change-Id: I0ae1e0acaf7422e73dc26befc9f066f3f424ec6b
CRs-Fixed: 2327153
DA based port learning is not required for HKv2 as
this issue is fixed in HKv2 Hardware
CRs-Fixed: 2329920
Change-Id: If006ce8fe5eb5d7e26ba4d30fd1d9cd43d5da480
Because of a HW issue we have added a WAR where we do
learning even on destination MAC address. This will ensure
da_is_valid even for forwarding traffic and HW will cache
this entry for subsequent pkts there by we achieve better
throughput in UL.
Change-Id: Ib61693e9ce52b3a1cdcd4c34eabb3d8368b1ef13
Currently peer reference is used with out taking any ref count.
In parallel context execution on different core peer reference may
be cleaned up in peer unmap event. So take ref count while using
the peer reference and decrement after done with it.
Change-Id: I02ca172cbdc4309fabd3bbbad00940826662bbd3
CRs-Fixed: 2301963
Currently wds enable for vdev conditional check is there for
intra bss rx forward. This check will break the intra bss for
the platforms which does not support WDS feature. In this change
remove the wds enable check for dp vdev.
Change-Id: Ib61c53734254b768902704ccb0e2a5c9b53f35f1
CRs-Fixed: 2303905
Currently there is no callback for MCL DP to do further action
when receiving data with invalid peer, add it for further processing.
Change-Id: I07c93b5119f0c1a46abba587b6b18c7b691683c7
CRs-Fixed: 2299489
Add support for DP RX Threads as a part of the FR. Multiple RX
threads can be enabled from the ini. The code is added in a new DP
module outside of the cmn project.
Change-Id: Id966c46c2799d23c2a4fa1c884610955afed3565
CRs-Fixed: 2256470
Clean up datapath component prints by correcting trace levels for
regularly occurring prints and removing newlines from converged
print APIs since qdf_trace_msh appends them by default.
Change-Id: Ie8fe319fcb737720f7400a165e134b6a18bd15b5
CRs-Fixed: 2243843
Populate the RSSI value for the non associated clients
added in pdev->neighbour_peers_list from monitor status
ring
Change-Id: I509d06bec6eafe8377681c8a3da9a64f301c3c73
CRs-fixed: 2286571
Add new ast_get_type API for DBDC repeater feature.
Add other changes required in WDS and MEC handling
required for DBDC repeater feature to function properly.
Apply sta kickout logic to handle roaming cases
only within same radio. For roaming across radios, DP should
rely on control path.
Change-Id: If9b35720082dd87de40827843a14238e818bc454
Removed qdf exports on functions defined in target specific
header files and defined those functions as static. Revert
changes on hal_rx_msdu_end_sa_idx_get and make
hal_rx_msdu_end_da_idx_get target specific
Change-Id: I2858b1d77118f0a26b54bf983bd342c7a4fe757d
Create separate individual hal_srng_table and hal register
offset in target specific source files. Create separate
functions for qca6290 and qca8074 for few hal rx tx
functions as the macro value differs between the chipsets.
Assign target specific hal tx, rx ops as part of hal_attach
and call respective hal tx, rx ops through callbacks.
Change-Id: Ibbf490c678c39fdd9d54191aad7aaec786db30ec
Account for tx.success and tx.comp_pkt stats counters
at peer level and propagate them to pdev level.
NSS stats need to be updated for all packets.
Change-Id: I18de95217690c9234060253671e0d5e1ef295e2a
CRs-Fixed: 2270816
structures
Rename osif_pdev to ctrl_pdev and os_if_vdev to ctrl_vdev in dp_pdev and
osif_dev structures respectively which are
pointing to objmgr_pdev and objmgr_vdev structures to maintain
uniformity
Change-Id: Ida95a1a90ea74513573f00c652338baee3df897a
CRs-Fixed: 2241362
use hal_msdu_len instead of qdf_nbuf_len to get
the packet length and correct the packet length
for first msdu of a amsdu
Change-Id: I7410cb6bd98743f3b01019c9e394c32c77c3a30e
CRs-Fixed: 2228232
Before showing DP statistics, per VDEV and per peer statistics
counters will be aggregated together and stats.rx data member of
PDEV will be set to all zeros. So only need to update per peer
statitics counters in RX stats_update.
Delete the obsolete PDEV stats.rx update operations.
CRs-Fixed: 2237020
Change-Id: Iba6437e6010dd8f87a3f152a529a8b0bc632972d
Address the following issues in the dp folder:
CHECK: 'availble' may be misspelled - perhaps 'available'?
CHECK: 'catagory' may be misspelled - perhaps 'category'?
CHECK: 'endianess' may be misspelled - perhaps 'endianness'?
CHECK: 'exceded' may be misspelled - perhaps 'exceeded'?
CHECK: 'explicitely' may be misspelled - perhaps 'explicitly'?
CHECK: 'Inteface' may be misspelled - perhaps 'Interface'?
CHECK: 'lengh' may be misspelled - perhaps 'length'?
CHECK: 'messsages' may be misspelled - perhaps 'messages'?
CHECK: 'miscelleneous' may be misspelled - perhaps 'miscellaneous'?
CHECK: 'Ouput' may be misspelled - perhaps 'Output'?
CHECK: 'poiter' may be misspelled - perhaps 'pointer'?
CHECK: 'Poiter' may be misspelled - perhaps 'Pointer'?
CHECK: 'psuedo' may be misspelled - perhaps 'pseudo'?
CHECK: 'registerd' may be misspelled - perhaps 'registered'?
CHECK: 'requred' may be misspelled - perhaps 'required'?
CHECK: 'retreive' may be misspelled - perhaps 'retrieve'?
CHECK: 'succesfully' may be misspelled - perhaps 'successfully'?
CHECK: 'vaild' may be misspelled - perhaps 'valid'?
CHECK: 'virtaul' may be misspelled - perhaps 'virtual'?
Change-Id: I66b9cdc6115dd133b385e60c9d02cefd1bd0bac3
CRs-Fixed: 2241574
In case of raw mode HW does not set the l2 header offset.
ignore this field in rx for rawmode.
Change-Id: I6e08a9540f55fdb97b21e4939256e6e5b9076e77
CRs-Fixed: 2243850
Enable multiqueue on VAP with 4 Tx and Rx queues in lithium.
In Rx path set the rx queue of skb based on the reo ring id on which it
is received.
In Tx path use the queue_mapping of skb to map to the hardware Tx ring
on which it has to be transmitted.
Change-Id: I103a21e91d1ed5c0e1d8441863d4fcd273b7bed9
Cleaned raw mode specific code and moved the rx
processing to single API dp_rx_sg_create
Change-Id: I7696786d9a0f10983d3299956b46b2ec76b388a5
CRs-fixed: 2204824
Remove NAWDS Rx Drop Count as it is not required,
drop packets in rx where length is not
available.
Change-Id: Ib4b41eefe88410137c3845090783ee43adb9147c
CRs-Fixed: 2191474
While doing RX NSS statistics counting, only MU_MIMO and MU_OFDMA_
MIMO frames are taken into consideration. So all NSS counter for
SU frames are missed.
Add RX NSS statistics counting for SU frames.
CRs-Fixed: 2228332
Change-Id: I5ee9b8f03177d31f5891a2e4e616b5740fec35f6
Fix for setting the right length when incrementing Rx Multicast
Bytes value
Fix for incrementing the Tx multicast packet value by correctly
returning the peer pointer to the stats function.
Change-Id: I46d59b7a71936d6eefdcba4419d0737f70aa4d48
CRs-Fixed: 2220973
Change the buffer manager from HAL_RX_BUF_RBM_SW3_BM to
HAL_RX_BUF_RBM_SW1_BM to handle regular and error packets.
Change-Id: I696d41f6cf0be1d5045ab27841ccc3ee2afea7de
CRs-Fixed: 2189452
Add a new API to update the stats which will be
called from dp_rx_process instead of updating stats
directly from within the dp_rx_process function
Change-Id: I13bdfd1606c3ceb2e38921ffa0cf3fe9f29c57ee
CRs-Fixed: 2189088
Create a lock for protecting rx descriptor
pool allocation during initialization and destroy it
during unloading the driver.
Change-Id: Icd489e400dab9bb648709134dcaa24c4d7724aa6
CRs-Fixed: 2215430
Initialize MAC1 along with MAC0. 2.4GHz monitor mode operates on
MAC1 so initialize MAC1 and reap both MAC0 and MAC1.
Change-Id: Id281def37d460b224f5f571893266f193846fd0c
CRs-Fixed: 2176848
In API dp_peer_find_by_id return NULL if delete_in_progress
bit is set, this will avoid referencing peer memory which will
be free in peer_unmap event asynchronously.
Change-Id: Ieab559b9274a886809a9baa9bb348d348e924625
CRs-fixed: 2194265
add the nbuf map result checking when replenish rx
nbuf to monitor status ring, this could avoid the
case nbuf map failed and invalid dma address
posted to HW or do unmap for unmapped nbuf.
Change-Id: I45cfc015f71a2d7295f7fcb4803bd6e68e2752d4
CRs-Fixed: 2182546
Add change in driver to get RSSI of non associated clients.
This is done in 2 levels of filtering
1. Send WMI to FW to configure BSSID in HW
2. Filter the neighbour BSSID packets received in host for
the configured client mac
Change-Id: I6b684b83cecb308dac326056aa77537aee07b933
CRs-Fixed: 2148773
Increase debug level of mesh prints as in current debug level lot of
prints are coming.
Change-Id: Ic584c1bb17415521b66e656274e7283279c8cc61
CRs-Fixed: 2188324
The buffer was not being freed after invalid peer handler.
Error are handled and returned but buffer free was not taken care.
Change-Id: I100cdc27e6ca1af3dde7ce6561f5dfb83b87127f
with fragmented pkts re-injected back to REO destination
ring as frag_list, we need to linearize these nbufs while
handling intra-bss forwarding cases.
Change-Id: Id692974ac5d80f369fafae39aec32e2066dffb0b
Move the peer Rx activity to PPDU_stats_handler
which is common for both NSS offload and Host datapath modes.
Change-Id: I06c3dd14d117cc291e3b19076ddfc7f3be00e602
CRs-Fixed: 2176385
* Update the pkt_type counters correctly within the array bound
* Add support for NSS counters on Tx side
* Update ampdu flag in PPDU struct
* Add support for ampdu flag in hal_ppdu struct
Change-Id: I79ea52727124ea4be4d82912cb2513ea58e2af10
Added dp path function pointers for inact
timers and set params used in WifiSON
Load Balancing Daemon
Change-Id: Ic23d7b562b476c0fb92c8734b029a4e1632599a5
In dp_rx_null_q_desc_handle, if peer is invaild and no need to
deliver to the upper layer, the nbuf must be freed before recycle
the rx descriptor.
CRs-Fixed: 2153932
Change-Id: I1b373d1b5b50da42b896f0b2fd7bbd13b0e2466d
Only need to udpate per peer statistics in RX. What's more, this
statistics should be protected by flag of process_rx_status.
CRs-Fixed: 2160448
Change-Id: Iff3f5e1e6d00ef777cd6b62d6903c710c9430960
