Commit Graph

637 Commits

Author SHA1 Message Date
Jeff Johnson
da70bd1338 qcacld-3.0: Harmonize the mlme_ht_info_field_2 layouts
Struct mlme_ht_info_field_2 has two different layouts depending upon
endinaness, but for one of the fields the naming does not match.
Rename the nonGFDevicesPresent field to be consistent with its
counterpart non_gf_devices_present.

Change-Id: Iafec9976d5f890ae6555af35c40186afacb5c325
CRs-Fixed: 2379073
2019-01-15 18:41:11 -08:00
Wu Gao
2255ea2817 qcacld-3.0: Defines five WNI cfg and one INI cfg
Based on new cfg framework, defines below five WNI cfg items and one
INI cfg:
 - WNI_CFG_APSD_ENABLED
 - WNI_CFG_OBSS_DETECTION_OFFLOAD
 - WNI_CFG_OBSS_COLOR_COLLISION_OFFLOAD
 - WNI_CFG_CURRENT_TX_POWER_LEVEL
 - WNI_CFG_LOCAL_POWER_CONSTRAINT
 - gTxPowerCap

Change-Id: I5546ea7a4efd142b546ad10a40712d40d2d3ea0d
CRs-Fixed: 2375857
2019-01-14 01:45:23 -08:00
Wu Gao
0821b0dd4c qcacld-3.0: Change WNI_VALID_CHANNEL_LIST_LEN to VALID_CHANNEL_LIST_LEN
All WNI configurations will be cleanup based on new cfg framework, so
change Change WNI_VALID_CHANNEL_LIST_LEN to VALID_CHANNEL_LIST_LEN.

Change-Id: I805be88ecdcca90cf3a19d1784bf8f8c261b6ca4
CRs-Fixed: 2379748
2019-01-13 18:45:55 -08:00
Wu Gao
6294afcfa7 qcacld-3.0: Refactor six LFR INI cfg
Based on new cfg component, refactor below LFR INI cfg and remove
unused legacy codes.
 - CFG_ENABLE_LFR_SUBNET_DETECTION
 - CFG_ROAM_HO_DELAY_FOR_RX_NAME
 - CFG_MIN_DELAY_BTW_ROAM_SCAN_NAME
 - CFG_ROAM_SCAN_TRIGGER_REASON_BITMASK_NAME
 - CFG_ROAM_FT_OPEN_ENABLE_NAME
 - CFG_ROAM_FORCE_RSSI_TRIGGER_NAME

Change-Id: Iaa738c6416dffe8159b49d59fc9a514da2fbb7ff
CRs-Fixed: 2376637
2019-01-11 22:25:19 -08:00
Kiran Kumar Lokere
7d6e4c9dc1 qcacld-3.0: crypto convergence support for SET KEY
Make changes to the legacy code to support the
new SET KEY converged infrastructure.

Change-Id: Ic5359e3a9035ac5f2a937a9a1013fa92764cda9d
CRs-Fixed: 2358795
2019-01-08 20:24:43 -08:00
Rajeev Kumar Sirasanagandla
14fa966039 qcacld-3.0: Enable WLM feature by default
Set wlm_latency_enable=1 to enable vdev latency manager feature
by default.

Change-Id: Iee5a4f386bad649be86a299c6816c7802c73992c
CRs-Fixed: 2369989
2019-01-08 02:34:23 -08:00
gaurank kathpalia
1be77fa6a9 qcacld-3.0: Add Dot11 mode related CFG items in mlme cfg
Add dot11mode related cfg items in mlme cfg, and replace
old WNI dot11 modes with new MLME DOT11 mode enums

Change-Id: I6e866959f440ae781432c8aaa724b229c0874856
CRs-Fixed: 2362540
2019-01-07 00:07:19 -08:00
Arif Hussain
0b634b48ed qcacld-3.0: Restore gDisableDfsJapanW53 ini support
Restore gDisableDfsJapanW53 ini support.

Change-Id: I085e62e7cd8b1fdfe931997d35915f55d079f11d
CRs-Fixed: 2371006
2019-01-01 17:06:03 -08:00
Abhinav Kumar
c1059384a6 qcacld-3.0: Address checkpatch errors added as part of VHT & WMM CFG items
Address checkpatch errors added as part of VHT & WMM CFG items.

Change-Id: I2c3d5466264781cee8197778806a349cfbf06957
CRs-Fixed: 2359406
2018-12-28 12:26:44 -08:00
Ashish Kumar Dhanotiya
efae55b005 qcacld-3.0: 11d and 11h inis are not getting updated
As part of ini convergence, enabled_11d and enabled_11h inis are
moved to converged framework but these inis are not removed from
legacy initialization path which is overwritting these values
to constant values and thus these inis are not taking effect.
Morever in the converged code also these inis are getting
initialized with default values instead of the values given
from ini file.

To address this issue, remove the legacy initialization of these
inis and in the converged ini path initialize these values with
the values configured in the ini files.

Change-id: I3d02c0d543fd561f1fd948b5c2850a509b1104e7
CRs-fixed: 2371528
2018-12-28 12:26:39 -08:00
Manikandan Mohan
2bd0977920 qcacld-3.0: Move IBSS INI params to converged CFG component
Update qcacld driver to move IBSS INI params to converged CFG
component and cleanup HDD ini entriesi

Change-Id: Id8e4c0505113e556a8d64915a648f17fc5c0daf5
CRs-fixed: 2358493
2018-12-28 02:23:00 -08:00
Pragaspathi Thilagaraj
df0f544dab qcacld-3.0: Add new "roam_score_delta" and "roam_score_delta_bitmap" ini
Add two new WCNSS_qcom.ini values:
"roam_score_delta" - Factor by which the new roaming candidate
ap score should be greater than the score of the current
connected AP.
"roam_score_deltabitmap" - Roam triggers for which
roam_score_delta needs to be applied on the roam score of the
candidate AP.

Populate these two values to wlan_mlme_scoring_cfg from cfg
component in mlme_init_scoring_cfg. The values are sent to
firmware over the WMI TLV WMI_ROAM_AP_PROFILE in the below code
flow:
csr_update_score_params()->__lim_process_roam_scan_offload_req()
->wma_process_roaming_config()->wma_roam_scan_offload_ap_profile

Change-Id: I64f2a2328e485418547dae937c657f85225f1457
CRs-Fixed: 2367910
2018-12-26 10:12:18 -08:00
Pragaspathi Thilagaraj
ae7dc766b3 qcacld-3.0: BTM changes to add new WCNSS_qcom.ini to configure btm params
Add the following new WCNSS_qcom.ini value:
"prefer_roam_score_for_candidate_selection" - choose to sort the
candidates on roam score or preferred AP list send in the BTM
request frame by AP.
When this ini is set, host driver will
modify btm_offload_config bit 7 which will be read by firmware
to get this ini value.

“roam_candidate_validity_timer” - roam cache entries validity
timer. The candidates in the roam cache are valid only for this
time value. This value is sent to firmware over the wmi command
on the structure wmi_roam_offload_tlv_param

"btm_disassoc_timer_threshold" - Disassociation timer threshold
to wait after which the full scan for roaming can be started
after the AP has sent the disassoc imminent

Change-Id: I3ba5ba2182b1b6d722d9c315757332a1b3e62521
CRs-Fixed: 2369018
2018-12-26 10:12:14 -08:00
Pragaspathi Thilagaraj
7d0a3cf99f qcacld-3.0: Send BTM query over 11k neighbor report
Add new WCNSS_qcom.ini value:
"prefer_btm_query" - Set this flag to enable the firmware to
send btm query for neighbor list. If this flag is not set,
the firmware will fallback to current mechanism of sending
11k neighbor report request instead of btm query.

When this prefer_btm_query is set, host driver will modify
btm_offload_config bit 8 which will be read by firmware to
get this ini value.

Change-Id: Id424c0da7207b0185cee67172782ef5c1d9fd131
CRs-Fixed: 2369000
2018-12-26 10:12:10 -08:00
Pragaspathi Thilagaraj
39d616074e qcacld-3.0: Add new WCNSS_qcom.ini "bss_load_bss_sample_time"
Add new ini item "bss_load_sample_time" to send the monitor
time window for which the beacons are to be sampled to collect
the bss load information.
Also add changes to send bss load trigger parameters only during
RSO start during initial connection

Change-Id: I61d1f3745b56199838fc886f1ed3a05786653501
CRs-Fixed: 2372147
2018-12-26 10:12:06 -08:00
Pragaspathi Thilagaraj
69f0b69ca9 qcacld-3.0: Send bss load trigger values to firmware
Introduce the following new WCNSS_qcom.ini values:
"enable_bss_load_roam_trigger"
"bss_load_threshold"
Send these values over the new wmi command,
WMI_ROAM_BSS_LOAD_CONFIG_CMDID if "enable_bss_load_roam_trigger"
is set to true.

This wmi command will be sent to firmware as part of the RSO
start or update config.

Change-Id: Ib2e21904bc7b8d87e5f51824d2694b90a3ac53f2
CRs-Fixed: 2367770
2018-12-26 07:47:25 -08:00
Arif Hussain
cca6043ce0 qcacld-3.0: Refactor stats cfg items
Refactor following stats cfg items
CFG_PERIODIC_STATS_DISPLAY_TIME
CFG_LINK_SPEED_RSSI_MID
CFG_REPORT_MAX_LINK_SPEED
CFG_LINK_SPEED_RSSI_LOW
CFG_LINK_SPEED_RSSI_HIGH

Change-Id: I1b699d5fe5b3182c292cf10c85f842169bf14342
CRs-Fixed: 2362068
2018-12-21 10:05:09 -08:00
lifeng
0b46ae503e qcacld-3.0: Refine mlme reg configurations
Refine mlme reg configurations based on converged cfg component.
Remove related legacy codes.

Change-Id: I524b29d2d03e60111fa1759d11e32236bb3aa3fa
CRs-Fixed: 2357961
2018-12-19 04:56:44 -08:00
Wu Gao
b056db61ad qcacld-3.0: Conditional reading of 5G preferred parameters
Read 5G preferred parameters if only enable_5g_band_pref enabled.
Delete unused variables.

Change-Id: I5e3a8435034dbc7682b9da4327dd6067d2033951
CRs-Fixed: 2367136
2018-12-19 02:04:27 -08:00
Sourav Mohapatra
c55bdf3e26 qcacld-3.0: Add ini based control for Beacon Reception stats
Currently, the support for beacon reception stats is only dependent on
the FW.

Add an ini so that the user can also have a control over the stats

Change-Id: I4a1e654b9d1598836378def494b37a997904d77a
CRs-Fixed: 2366473
2018-12-19 02:04:22 -08:00
lifeng
db340e7fcd qcacld-3.0: Refine mlme mwc configurations
Refine mlme mwc configurations based on converged cfg component.
Remove related legacy codes.

Change-Id: I2b66ec6c262bdd98f500678d713ed03eb187f1bd
CRs-Fixed: 2352679
2018-12-17 12:14:15 +08:00
Pragaspathi Thilagaraj
2b9259f963 qcacld-3.0: Refactor WNI_CFG_WPS_UUID cfg to mlme component
WNI_CFG_WPS_UUID should be refactored and adopted by the mlme
component.

Move the cfg item to cfg_mlme_wps_params.h

Change-Id: I79db155ad16998e9d7a7e20c01efbcba1681d61e
CRs-Fixed: 2366599
2018-12-15 19:25:13 -08:00
Pragaspathi Thilagaraj
784c492c07 qcacld-3.0: Remove legacy powersave ini and refactor to mlme component
Add the functionality changes to replace the legacy powersave
parameters corresponding to the ini values that were converged.

Remove the legacy powersave ini items.

Change-Id: I1da9af9aac4a02a16dc22a43f7f9d526e196d599
CRs-Fixed: 2364964
2018-12-14 22:49:22 -08:00
Pragaspathi Thilagaraj
43455535fc qcacld-3.0: Converge Powersave related ini items to MLME
Add basic infra to move the following Powersave related
ini to MLME component:
CFG_ENABLE_IMPS               CFG_ENABLE_PS
CFG_AUTO_PS_ENABLE_TIMER      CFG_ICMP_DISABLE_PS
CFG_BMPS_MINIMUM_LI           CFG_BMPS_MAXIMUM_LI
CFG_DTIM_SELECTION_DIVERSITY

This change brings in mlme_init changes, mlme_public_struct.h changes
and cfg_mlme file changes for power save parameters.
Also remove the ini CFG_ICMP_DISABLE_PS_NAME as it is not used.

Change-Id: Ifd74d276b12acc8cd9740c25ee3ca261ed7d0143
CRs-Fixed: 2356897
2018-12-14 22:49:18 -08:00
Sourav Mohapatra
c457ae6f18 qcacld-3.0: Feature flag for Wlan Latency Manager support
WLAN Latency Manager support is one of the capabilities that is sent
along with the service bits by firmware. Currently, driver is not
exposing this feature to the user space.

Create and add support for a feature flag to expose this feature to the
userspace.

Change-Id: Ica8213bdaeb32c7be01b6a71a7d8b7a32dc8611b
CRs-Fixed: 2363704
2018-12-14 07:15:10 -08:00
Pragaspathi Thilagaraj
9f79074a67 qcacld-3.0: Remove error message after mlme_obj NULL check
The function mlme_get_psoc_obj() is used to get the mlme_obj and
error handling is taken care inside the function if mlme_obj is
null.
Remove the error message in callers of mlme_get_psoc_obj.

Change-Id: Ie7cda790758ad21b1a0275d313a97f322a2f6fd7
CRs-Fixed: 2365042
2018-12-12 01:45:30 -08:00
Wu Gao
e7687f4b71 qcacld-3.0: Parse INI configure with user setting
It use default value instead of user setting when parse INI
"gNeighborScanChanList".

Change-Id: I99ccede8b68eefbfef96718fa4432c1824cdcf7f
CRs-Fixed: 2363952
2018-12-10 23:33:33 -08:00
Yeshwanth Sriram Guntuka
334aa8de95 qcacld-3.0: Add MLME CFG items of FE_WLM and FE_RRM
Add the following WLM and RRM ini configs to MLME
cfg:
CFG_LATENCY_ENABLE
CFG_LATENCY_LEVEL
CFG_LATENCY_FLAGS_NORMAL
CFG_LATENCY_FLAGS_MOD
CFG_LATENCY_FLAGS_LOW
CFG_LATENCY_FLAGS_ULTLOW
CFG_RRM_ENABLE
CFG_RRM_MEAS_RAND_INTVL
CFG_RM_CAPABILITY

Change-Id: I714aca1e9bc6d3c330934753364d7f58d93a28d7
CRs-Fixed: 2353103
2018-12-10 07:23:13 -08:00
Krunal Soni
d2c33e171d qcacld-3.0: Move few INIs' ownership from HDD to MLME
INIs
1) gFWMccRtsCtsProtection
2) gFWMccBCastProbeResponse
3) gEnableMCCMode
4) gSapChannelAvoidance
5) gStaMiracastMccRestTimeVal

Ownership of above INIs belong to MLME component, move them from
HDD to MLME.

CRs-Fixed: 2351219
Change-Id: I3dc1b8f1f036f10a0506cb1cb8481fc865ef18f9
2018-12-06 17:51:08 -08:00
Sourav Mohapatra
0dfe5550e0 qcacld-3.0: Relocate HDD ini items (1)
Relocate below HDD ini items as per converged infrastructure.
1. CFG_ENABLE_RUNTIME_PM
2. CFG_STA_KEEPALIVE_METHOD_NAME
3. CFG_ENABLE_MCC_ENABLED_NAME
4. CFG_ENABLE_SAP_SUSPEND
5. CFG_ENABLE_DEAUTH_TO_DISASSOC_MAP_NAME
6. CFG_INFORM_BSS_RSSI_RAW_NAME
7. CFG_AP_ENABLE_RANDOM_BSSID_NAME
8. CFG_VC_MODE_BITMAP

Change-Id: I881c87f9ca73804d03af358163c9a043b3193c81
CRs-Fixed: 2357174
2018-12-06 13:43:56 -08:00
Abhishek Singh
5d921548f2 qcacld-3.0: Replace legacy string in vdevmgr with ext
Replace legacy string in vdevmgr with ext string.
Also adds new compile CMN_VDEV_MLME_CMPT_ENABLE macro
for VDEV MLME component.

Change-Id: I40ce0c2ee4d653d2f4ce68093e8ad1b2c78bece8
CRs-Fixed: 2361525
2018-12-06 10:27:50 -08:00
lifeng
6d19c25d31 qcacld-3.0: Refine mlme btm configurations
Refine mlme btm configurations based on converged cfg component.
Remove related legacy codes.

Change-Id: I0a90eceea5636e268048ed6bf1532150dc1f6b24
CRs-Fixed: 2355353
2018-12-05 13:13:36 -08:00
Abhinav Kumar
d4d6eb7d4e qcacld-3.0: ADD MLME INI items of FE_BEAMFORM and WLAN_REG
Add the following WLAN_REG ini configs and FE_BEAMFORM
cfg items to MLME cfg:
1. WNI_CFG_11D_ENABLED
2. WNI_CFG_11H_ENABLED
3. WNI_CFG_TX_BF_CAP
4. WNI_CFG_AS_CAP
5. WNI_CFG_DISABLE_LDPC_WITH_TXBF_AP

Introduce the basic infra APIs related to these configs
from mlme.

In csr_roam_open_session, lim_populate_vht_mcs_set,
lim_sta_send_add_bss, populate_dot11f_tdls_ht_vht_cap,
populate_dot11f_vht_caps and sme_update_nss, local structure
is updated instead of mlme global structure for vht caps and
thus the mlme vht caps contains only the default values.

Fix this by updating mlme vht caps in mlme_update_vht_cap.

Change-Id: I1a948d7a44ad2bcc7f711c46b278971d7e4026e7
CRs-Fixed: 2354562
2018-12-04 19:57:54 -08:00
Arif Hussain
bd5194c5e0 qcacld-3.0: Refactor CFG_FINE_TIME_MEAS_CAPABILITY cfg
Refactor following CFG_FINE_TIME_MEAS_CAPABILITY cfg items.

Change-Id: I854e584e366490f788ee778adad3fec0c2b5c8cc
CRs-Fixed: 2357070
2018-12-04 00:06:01 -08:00
Arif Hussain
4966f697ef qcacld-3.0: Refactor CFG_WMI_WQ_WATCHDOG cfg
Refactor following  CFG_WMI_WQ_WATCHDOG cfg items.

Change-Id: Ib65c6cda2a2574940604e8b67bc29a6749add842
CRs-Fixed: 2357070
2018-12-04 00:05:57 -08:00
Arif Hussain
224d38154f qcacld-3.0: Refactor more dfs cfg items
Refactor following DFS cfg items
CFG_DISABLE_DFS_CH_SWITCH
CFG_ENABLE_DFS_PHYERR_FILTEROFFLOAD_NAME
CFG_IGNORE_CAC_NAME
CFG_DFS_RADAR_PRI_MULTIPLIER_NAME
CFG_SAP_TX_LEAKAGE_THRESHOLD_NAME
CFG_DFS_BEACON_TX_ENHANCED
CFG_DISABLE_DFS_JAPAN_W53
CFG_ENABLE_NON_DFS_CHAN_ON_RADAR

Change-Id: I7f39ed0680919c6a383d9b8bae5864f979b6948c
CRs-Fixed: 2351995
2018-12-04 00:05:53 -08:00
Jianmin Zhu
69e7bf332c qcacld-3.0: Enable CSA of STA mode for VDEV SM
After receive F/W wmi_csa_handling_event
1. Send WLAN_VDEV_SM_EV_FW_VDEV_RESTART before switch channel
	when gLimChannelSwitchTimer timeout.
2. Call __lim_process_channel_switch_timeout in
	mlme_vdev_restart_send.
3. Send WLAN_VDEV_SM_EV_RESTART_RESP in
	wma_vdev_start_resp_handler.
4. Send WMA_SWITCH_CHANNEL_RSP in mlme_vdev_start_continue.
5. Send WLAN_VDEV_SM_EV_START_SUCCESS in
	lim_switch_channel_cback.

Change-Id: I18e64ddf4ca898189cd22a3c8102a67702a025cc
CRs-Fixed: 2355762
2018-12-02 22:31:22 -08:00
gaurank kathpalia
3d2e38572b qcacld-3.0: Add CFG items of power
Add power items related CFG items in new file,
and store the respective inis in MLME component

Change-Id: Iac183da52495aca07c6270edeb9f383ab49c1ff5
CRs-Fixed: 2341900
2018-12-02 14:59:45 -08:00
Arif Hussain
178f35f013 qcacld-3.0: Refactor TWT cfg
Refactor following TWT cfg items.
CFG_BCAST_TWT
CFG_ENABLE_TWT
CFG_TWT_RESPONDER
CFG_TWT_REQUESTOR
CFG_TWT_CONGESTION_TIMEOUT

Change-Id: Iad0c2ed0893513cc98bf12ec39d111b78c6e9d1f
CRs-Fixed: 2349558
2018-11-29 18:11:55 -08:00
Wu Gao
5d23d785f9 qcacld-3.0: Add second part of LFR INIs based on cfg components
The second part of LFR INIs are defined dynamically in legacy codes.
Refines these INIs and APIs based on new cfg component.

Change-Id: I89869c50952bf2fe403079299b3902fc53c11d61
CRs-Fixed: 2346784
2018-11-29 18:11:44 -08:00
Wu Gao
4f8938a510 qcacld-3.0: Refactor one mlme sta INI
Based on new cfg component, refactor CFG_TX_POWER_CTRL_NAME and clean
up related legacy codes.

Change-Id: I6dd317d5065c4111b71a9fe94d9b9af1f7d3d664
CRs-Fixed: 2355918
2018-11-29 18:11:38 -08:00
Pragaspathi Thilagaraj
4b5c0601a2 qcacld-3.0: Add the MLME CFG items to new MLME component
Add the following mlme cfg items:
CFG_AP_PROTECTION_MODE_NAME
CFG_AP_OBSS_PROTECTION_MODE_NAME
CFG_AP_STA_SECURITY_SEPERATION_NAME
CFG_ENABLE_BT_CHAIN_SEPARATION
CFG_AP_QOS_UAPSD_MODE_NAME

Change-Id: Iabdfb7c2492c234cfc3e8f71f33801f0034e578d
CRs-Fixed: 2350626
2018-11-28 14:35:01 -08:00
Wu Gao
fc81ecf914 qcacld-3.0: Refactor one INI about obss ht40
Based on new cfg component, refactor INI CFG_OVERRIDE_HT40_20_24GHZ_NAME
and remove legacy codes.

Change-Id: I5b4ed96a4930a9358bd93ee809bf5cddb2787fb4
CRs-Fixed: 2354476
2018-11-28 07:39:29 -08:00
Vignesh Viswanathan
ecd4de72ad qcacld-3.0: Cleanup HT Related CFG/INI Items
Cleanup multiple HT related CFG/INI Items which are already moved to the
MLME component.
Also move gShortSlotTimeEnabled INI from HDD to MLME component

Change-Id: Ie8c19f508401d4d72990f35ea5dcc18d45f0f16b
CRs-Fixed: 2354687
2018-11-23 03:38:24 -08:00
Bala Venkatesh
3d786ebe08 qcacld-3.0: Refactor SAP ini items
Refactor ini items gSapForce11NFor11AC and gGoForce11NFor11AC
into new mlme component.

Change-Id: I85e2f7f9ae14a23c322572290b095aae0f29b0ec
CRs-Fixed: 2354940
2018-11-22 18:18:01 -08:00
Abhinav Kumar
ab57671afd qcacld-3.0: ADD MLME INI items of WMM Config
Add the following WMM config ini configs to MLME cfg:

1. CFG_QOS_WMM_INFRA_INACTIVITY_INTERVAL_NAME
2. CFG_QOS_WMM_BURST_SIZE_DEFN_NAME
3. CFG_QOS_WMM_TS_INFO_ACK_POLICY_NAME
4. CFG_QOS_ADDTS_WHEN_ACM_IS_OFF_NAME

Introduce the basic infra APIs related to these configs
from mlme.

Change-Id: I149971768a7193099926e2778f093dcd073f0461
CRs-Fixed: 2327692
2018-11-22 07:53:08 -08:00
Bala Venkatesh
2fae18aa35 qcacld-3.0: Clean up legacy HE CAP Cfg items
Cleanup of HE caps cfg items from legacy path.

Change-Id: I769601f4d0f1681cee7168069e63f3f7ceab0475
CRs-Fixed: 2353934
2018-11-22 04:18:15 -08:00
Pragaspathi Thilagaraj
129d6979e8 qcacld-3.0: Update wep_key length in mlme_get_wep_key
In mlme_get_wep_key, the key_length is got from the caller is
hardcoded to value 13. This should be updated based on the
length of the key and passed to the caller. But it is not
updated and value 13 is used to copy the key, resulting in
decrypt failure.
Also add debug logs to print wep key id and length.

Pass the key length by call by reference to update the key
length

Change-Id: Ie1e56a80db27894bf9f0426728f9fb74a014679e
CRs-Fixed: 2351182
2018-11-22 02:29:38 -08:00
Arif Hussain
41cbc1e9a5 qcacld-3.0: Add ucfg api to get/set ps data inactivity timeout
Add and use ucfg api to get/set ps data inactivity timeout value.

Change-Id: I8b0931870507aac146a18b70103c323bea1ca6f3
CRs-Fixed: 2335980
2018-11-20 14:38:03 -08:00
Bala Venkatesh
6d53709337 qcacld-3.0: ADD HE CFG items in MLME component
Refactor HE cap cfg items to new mlme component using
updated cfg architecture.

Change-Id: Ib983d3fc983dfffd2eee7efd1a4e3681d26d84a6
CRs-Fixed: 2351420
2018-11-20 00:26:34 -08:00