The userspace sends QCA_WLAN_VENDOR_SECURE_RANGING_CTX_ACTION_DELETE
action in the QCA_WLAN_VENDOR_ATTR_SECURE_RANGING_CTX_ACTION to delete
the pasn peer. Add changes to handle this action.
Change-Id: I30bcdadd792d5bf1271c61fa585c62d5255eee5b
CRs-Fixed: 3358878
There are two different names with different range of
value for aliasing INI's.
So, it should pick the valid range of value wrt INI
name.
Change-Id: I58d4797a0fa598a1e44349c8954dac3378f1a751
CRs-Fixed: 3352412
Reset return value in wlan_hdd_cfg80211_handle_tsf_cmd
function so that QCA_TSF_GET command gets process.
Change-Id: Ia81d5e3920a6f707edcbdb05583f94798534b721
CRs-Fixed: 3353246
When roam from legacy to MLO/SLO, need change vdev self mac to link addr.
When roam from MLO/SLO to legacy, need change vdev self mac to mld/net
addr.
Change-Id: Ife17fd0a79a9f067eb72ac510dbf437b6d3649d8
CRs-Fixed: 3351027
As part of Spatial Reuse, host has to send SR Suspend and resume
events based on concurrency which is not sent in case of NAN
concurrency.
Fix is to send SR Suspend in case NAN comes up and any STA that
supports SR is already present because SR is not supported in
case of NAN concurrency. Similarly during NAN disable check
if any other vdev apart from NAN is sharing mac with STA that
supports SR and SR support on same mac is disabled then don't
send SR resume event as there is already a concurrent vdev that
will take care of SR Suspend event otherwise send SR Resume event.
Change-Id: I56a9b455dd0166bc3997f8306992e46da759e992
CRs-Fixed: 3339713
Currently, srg color bit map and partial bssid bit map
is not updated correctly.
Fix is to parse srg color bit map and partial bssid bit
map array correctly from assoc resp and add it to 64 bit
map which will be used to send 2 bitmaps of 32 bits to FW.
Change-Id: I8114359f8dda246c9d210fefdb1be55a3d0568a3
CRs-Fixed: 3355534
When component dependent functions calling from higher
modules or any other components, it uses ucfg APIs pattern.
Calling ucfg dependent APIs is acceptable for higher modules
like HDD, OSIF but for another components like DP to avoid
using ucfg APIs here, implementing component APIs for existing
ucfg APIs to other components like MLME, TDLS, Pkt capture in
DP component module.
Change-Id: Ib8857eeca6a88810d7875312ff6dc14ffb60bc70
CRs-Fixed: 3351486
SAP/GO doesn’t support below EHT capabilities, So the driver
should not advertise it in beacon, probe rsp and assoc rsp.
It can cause IOT issues if capabilities are advertised
without support.
1. tx_1024_4096_qam_lt_242_tone_ru
2. rx_1024_4096_qam_lt_242_tone_ru
3. non_ofdma_ul_mu_mimo_le_80mhz
4. non_ofdma_ul_mu_mimo_160mhz
5. non_ofdma_ul_mu_mimo_320mhz
Fix is to disable the above unsupported EHT capabilities
for SAP/GO's beacon, probe rsp and assoc rsp.
Change-Id: Ia958e2f3de7454eb5eff34a347e65f7510f433bc
CRs-Fixed: 3340585
Enhance the print of SAE TA, to always log the address passed to
cfg80211_external_auth_request().
Change-Id: I0765b3a0465d7271b3bf42bc7498d4b7e673c88e
CRs-Fixed: 3357863
This is applicable only when the roaming happens from 2.4 GHz/5 GHz
to 6 GHz AP.
The value is used to check if the 6 GHz AP to which we are roaming
(from 2.4 GHz/ 5 GHz) is better than current AP in terms of RSSI.
This checking is disabled if the value is set to zero.
Change-Id: I77f1183e1fd704dfa153841e669a20c9e75d0fe7
CRs-Fixed: 3353346
In __wlan_hdd_cfg80211_sr_operations(), it doesn't free the
skb for vendor command reply when fail to fill it, which
will result in memory leak in such case.
To fix it, free the skb properly, and replace the kernel APIs
cfg80211_vendor_cmd_alloc_reply_skb()/cfg80211_vendor_cmd_reply()
with internal APIs wlan_cfg80211_vendor_cmd_alloc_reply_skb()/
wlan_cfg80211_vendor_cmd_reply().
Change-Id: Iefa578c06782db579d8fe9f5453aca2bf6622b2d
CRs-Fixed: 3354148
For LL SAP, add edca_pifs_param vendor ie in assoc rsp, beacon
and probe rsp and send it to earbud via OTA frames.
Change-Id: I7641e8c98d57acf600fe2137a04b34625e29c3e0
CRs-Fixed: 3344888
Add WMI interface(WMI_VDEV_SET_TWT_EDCA_PARAMS_CMDID) to
configure EDCA/PIFS param for LL SAP.
This configuration depends on edca_param_type.
If edca_param_type is 0 then host will configure EDCA param and
send it to firmware via WMI interface.
If edca_param_type is 1 then host will configure PIFS param and
send it to firmware via WMI interface.
Change-Id: I09f49474c0a698257d06aa4f1a17b56aae735fa5
CRs-Fixed: 3349447
IOMMU map and unmap memory regions related to direct link
into LPASS SMMU context bank for LPASS to access that memory
in direct link use cases.
Change-Id: I4414ad1f480a639ee2d8a0677326624cd959b2b4
CRs-Fixed: 3356587
set CONFIG_DP_TX_COMP_RING_DESC_SANITY_CHECK for Def build to
enable TX completion ring desc sanity check.
Change-Id: Ia9cd28f6bcce234d0e7bf7f621cc33208479e899
CRs-Fixed: 3349744
Add PLD API support for mapping and unmapping memory
regions via platform driver API calls to Audio SMMU
context bank.
Change-Id: I93b5308ce6cb024773a780c0aaf98a4fd06281d7
CRs-Fixed: 3351568
The dscp value in the Qos map set element of assoc response
frame may be malformed. When try to update the dscpmampping,
make sure the value is less than SME_QOS_WMM_UP_MAX.
Change-Id: I669c5bec66a7dc839d2b2bdfa4eaafb8d7c8736a
CRs-Fixed: 3354319
Handle the possibility of NULL value for VDEV MLME component in
lim_get_self_dot11_mode().
Change-Id: I43ba34f0f1de53961c0f3ad2e675ddae899360d8
CRs-Fixed: 3356646
For GTK offload functionality, currently only 16bytes of
KEK and KCK are being copied from the userspace.
In latest kernel, kek length and kck length are sent to the
host driver as part of set_rekey_data command. Therefore,
use this length to copy the kek, kck params in host driver.
Change-Id: Idef0247aaab22022a84898eca6eb2f010ca1bf1f
CRs-Fixed: 3345506
In WoW mode, roam auth event may comes before roam start event, so CM
isn't in ROAMING state at that time, can't assume ROAMING state.
Change-Id: Ibf868db1ca0f9863d4beae4c83227cf04fe55adb
CRs-Fixed: 3357115
In wow_get_wmi_eventid(), the reason to event id mapping fills
the wrong command id (WMI_ROAM_PREAUTH_STATUS_CMDID) instead of
the event WMI_ROAM_PREAUTH_START_EVENTID and.
Since the event WMI_ROAM_PREAUTH_START_EVENTID will not be
piggybacked, remove the reason WOW_ROAM_PREAUTH_START_EVENT from
wow_get_wmi_eventid api. Fix the documentation of setting the
WOW_ROAM_PREAUTH_START_EVENT bit in pmo wow bitmap.
Fix invalid event id mapping for WMI_TDLS_PEER_EVENTID also in
wow_get_wmi_eventid().
Change-Id: Ifd08dc94cda22d9de662ef15b74cb19571007052
CRs-Fixed: 3355578
GO on 5 GHz channel 48, MLO STA 5 GHz (48) + 6 GHz (1) is UP.
SAP starts ACS, and before ACS complete, supplicant moves GO
to 5 GHz channel 149. Before GO CSA is completed, SAP ACS
is completed and start AP on 5 GHz channel 157. Then 3 home channels
are on same 5 GHz high band.
Fix by make User CSA as sync call and after GO CSA is completed
SAP should force SCC to low band during SAP starting, then avoid
3 home channels on high band.
Change-Id: I55ee559b47f270322ac3d2da7304dc5e8e104cf1
CRs-Fixed: 3352096
For SAE-EXT-KEY AKM with group-21 pwe, the PMK
length is 64bytes. Therefore, increase the max
size of the PMK to 64bytes in host to facilitate
PMK storage and PMK offloads.
Change-Id: I777a31acd56073d6a0312c47d95fe7d155b06fc6
CRs-Fixed: 3353102
In hdd_adapter structure, the qdf_session_open_event is
a declared as event type which is initialized but not used.
Remove this unused event variable and all its references.
Change-Id: Iec1ece36153a3c9986195bbc2cc19bf8a469f2ee
CRs-Fixed: 3354149
The kernel-doc script identified some documentation issues in
wlan_dp_priv.h, so fix them.
Change-Id: I38bc7293d4ef7b34bbc40930b2c1e4daaff4a13b
CRs-Fixed: 3352263
Currently host driver does not update dot11 mode info correctly
for getbssinfo command if the dot11 mode is 11AX or 11BE.
With this fix add a logic to update the dot11 mode info
correctly in response to the getbssinfo command.
Change-Id: I9ebec3ab43fe4cff1cab5f646bcc93a8c6654fd0
CRs-Fixed: 3353630
While doing CAC for moving SAP to DFS channel, channel
avoid event can be received. While in CAC is going on,
the current sap channel is not updated and remains the
channel on which sap was before CAC. It is only updated
after CSA. So, when channel avoid event is received,
it is checked against the previous frequency and hence,
no action is taken as the previous frequency is part of
safe channel. This results in sap starting and remaining
in Unsafe channel.
As, a fix when sap starts after CSA, check for unsafe
channel and if the sap frequency is unsafe then restart
it to another channel.
Change-Id: I910b80fe87fc149f25e84383b128a5e5c9d269e4
CRs-Fixed: 3287239
