In case of dense roam scenario, Host should set initial dense
status if roamable AP count is more than minimum dense AP count.
Current implementation checks for the number of channels in roam
cache list instead of AP count.
Add changes to set the flag if roamable AP count is more than
configured value.
Change-Id: I4d5f7c6c69b1a9a527aace1677050373065af213
CRs-Fixed: 1058211
qcacld-2.0 to qcacld-3.0 propagation
Currently RRM scan results are sent out to the requesting AP, but
are not updated to the kernel.
Update the results to the kernel so that it will be useful in future
in the userspace if a BTM request is received and the lookup of
scan cache can fetch a result for the target AP and an additional
scan can be avoided.
Git-commit: 3075ac910c015ce525bf8badd1eb4a277286b28f
Change-Id: Ie56b86e5c54910648cb2ae8bf2a7dac2ee873e00
CRs-Fixed: 1010596
In following conditions RX LDPC support needs to be enabled
1) when STA is coming up in 5G band
2) when IBSS is coming up in 5G band
for anyother cases RX LDPC needs to be disabled. If user has
choosen RX LDPC to be disabled from INI file then it needs to
be disabled for all the cases including above mentioned cases.
To achieve this, take the intersection of global, INI, and harware
specific RX LDPC settings.
Change-Id: Iae10aa4a8c0931cdb796cd9c8ff558d4bc8e0aed
CRs-Fixed: 1050004
qcacld-2.0 to qcacld-3.0 propagation
Currently, In SAP mode due to incorrect wep key
index broadcast frames are not encrypted.
Fix is to make sure to update default index for
BSS(group) key.
Change-Id: I328855decbad20dbd88b48022e466e4f78f5d722
CRs-Fixed: 932749
Sessionize VHT Capability by updating the session
entry at join request or start bss and read the same
capablities at LIM instead of reading from global VHT
CFG items.
Following CFG items are taken care as part of this change.
WNI_CFG_VHT_SU_BEAMFORMER_CAP,
WNI_CFG_VHT_SU_BEAMFORMEE_CAP,
WNI_CFG_VHT_CSN_BEAMFORMEE_ANT_SUPPORTED,
WNI_CFG_VHT_MU_BEAMFORMER_CAP,
WNI_CFG_VHT_MU_BEAMFORMEE_CAP
Change-Id: I7c33de1180416db0027b4690170060549847dd9a
CRs-Fixed: 1029145
Sessionize VHT Capability by updating the session
entry at join request or start bss and read the same
capablities at LIM instead of reading from global VHT
CFG items .
Change-Id: Idef009d4c76cfc6939359dc09379fc1f0d820589
CRs-Fixed: 1029145
qcacld-2.0 to qcacld-3.0 propagation
Add NAN API wrapper function definitions and also fix compilation
failure when NAN data path feature is disabled.
Change-Id: Ib4a3133568eee0c2257c65bb0a8905c44048f0c2
CRs-Fixed: 1049546
In current driver, there is already an API called cds_allow_concurrency
which is functionally similar to csr_isconcurrentsession_valid. Remove old
API csr_isconcurrentsession_valid to have single API.
Change-Id: If81900af5cb7291917fe915b44af5cf763f16d46
CRs-Fixed: 1047054
Remove the usage of typedef for oem data request and oem
data response data structure.
Change-Id: I94f05833baa9b6baaf2272f63a33236437a96bbf
CRs-Fixed: 1038872
Remove oem data rsp passing over multiple layers.
This change set sends the OEM data response directly to
SME from WMA instead of going through LIM/MLM.
Change-Id: I3cff10ff7bdbcee39b39bd9ba03b5eff8444b017
CRs-Fixed: 1038872
Remove oem data request passing over multiple layers.
This change set sends the OEM data request directly from
SME to WMA instead of going through LIM/MLM.
Change-Id: I151fa771544e9f74b1b69b18d689176752760621
CRs-Fixed: 1038872
qcacld-2.0 to qcacld-3.0 propagation
When STA process Neighbor report from AP, session_id is declared
as one byte variable and its overwritten with four bytes value
in csrRoamGetSessionIdFromBSSID. This is observed on enabling stack
protection in kernel config(CONFIG_CC_STACKPROTECTOR).
Fix is to declare session_id as four bytes variable.
Git-commit: 96646d1eb48c4f3bf45555b8f636f90cf925b8b8
Change-Id: I6b2fd40a5466fe5dd72d394abb682229a550e0b1
CRs-Fixed: 1025272
Configure multicast filters for the nan data interface.
Request to configure multicast filters is not honored for the
NAN data interface in the current implementation.
Integration from qcacld-2.0 to qcacld-3.0.
CRs-Fixed: 1046519
Change-Id: I48a4a30fd9f6369fe398254184d0016a35c0a6b3
As part of "load once unload never" architecture, cds modules can
be opened and closed several times. Refactor the hdd callback registration/
de-registration into hdd_register_cb/hdd_deregister_cb which can
be invoked during the open/close of the modules respectively.
Change-Id: I2da9018ff2fa6188e61e007c896bc13e8fddcb7d
CRs-Fixed: 1026817
This is qcacld-2.0 to qcacld-3.0 propagation
The BSS transition request is handled by the supplicant.
The supplicant upon receiving the request will issue a
connect request to the driver with a hint of prev_bssid
telling the driver to perform a re-association.
Use this hint in the driver and initiate a re-association.
While doing the re-association, there is no need to do a
scan if the target AP is already present in the scan cache.
Optimize the re-association code to not do a scan if not
necessary in this particular case.
Change-Id: Idf1a7058009a8d2082bc1742dca1364cf59c405b
CRs-Fixed: 1010596
qcacld-2.0 to qcacld-3.0 propagation.
oem data request len size should be of 4 byte instead of
1 byte.
Add changes to correct len size in oem data structure across the
layers.
Change-Id: I9b377420c50ff1160964f94be5eaa0072df0f63d
CRs-Fixed: 1013488
The chain mask in policy manager connection table needs to be updated
with the capability that HW advertises at load time intersected with
related ini configuration on host. The dynamic change of the chain
mask & NSS values will be handled only by chain mask manager in
firmware.
Change-Id: I250668c93920a63c9278aefe93491cb5aaa91ca7
CRs-Fixed: 1037816
Add support for WMI POWER DEBUG command to control mac_core power features
for run time debugging.
Change-Id: I77ad747843cae31de1705b7ce8fa80e18c9ca53e
CRs-Fixed: 1007598
This is qcacld-2.0 to qcacld-3.0 propagation.
Add NDP reason codes in deferred response sent for NDP commands so that
failure during processing of NDP cmds can be notified to service layer.
Change-Id: I731b520fde226c351464d94033a1ced2888a4d18
CRs-Fixed: 962367
This is qcacld-2.0 to qcacld-3.0 propagation
Free up memory allocated for NDP SME commands at sme_close, so that in
the event of unload while NDP command response was awaited, resources
can be freed.
Change-Id: I287ad77cbdca4b816f38bea436173b88e6eafc93
CRs-Fixed: 962367
qcacld-2.0 to qcacld-3.0 propagation
Firmware sends an array of:
{ndp instance id, vdev id, active ndp num, peer mac address}
for the NDP instances that are to be terminated.
Host driver deletes the peers that have 0 active ndp instances and
sends the entire list of ndp instance id's to the service layer.
Change-Id: I325843ce7fb8198466cb66ce66710cef999d4581
CRs-Fixed: 962367
This is qcacld-2.0 to qcacld-3.0 propagation.
Add implementation of NAN Data End request.
Change-Id: Iddd22a83b0763dab2e7398f4d2cf5b9ada58225a
CRs-Fixed: 962367
This is qcacld-2.0 to qcacld-3.0 propagation
Add implementation for non-auto accept NDP responder request.
Change-Id: I2ced33cfa0faf487d8e31275493e8d85251e8c59
CRs-Fixed: 962367
qcacld-2.0 to qcacld-3.0 propagation
Add host side changes to handle INITIATOR_REQ, INITIATOR_RSP,
NEW_PEER_IND and NDP_CONFIRM_IND to support NDP data initiator
request.
Change-Id: I10bf88d3fff27e1f842b720a598c923983c06c90
CRs-Fixed: 962367
To lower the power consumption caused by the P2P listen operation,
it is offloaded from supplicant and host driver to firmware,
so that supplicant and host driver can be in power save mode during the
listen operation.
Change-Id: Iedd990427afe22842faecc7b29e4f38220c75684
CRs-fixed: 1032877
gPolicyManagerEnable INI item is no longer needed. Remove this
INI item and make policy manager code enabled by default.
Change-Id: I57822f47325c03e940b2802fb02900c64d3587e1
CRs-Fixed: 1034888
qcacld-2.0 to qcacld-3.0 propagation
Add changes to handle request to delete NAN datapath interface.
Change-Id: I3efef6adf6c7a974d3e344a7609f8517cd1aa752
CRs-Fixed: 962367
Add support for NDP vendor commands and implement NAN Data Interface
create.
Propagation from qcacld-2.0 to qcacld-3.0
CRs-Fixed: 962367
Change-Id: I84e9ac5ccfe8faaa00dfc448defb81fb792263d5
qcacld-2.0 to qcacld-3.0 propagation
Add changes to support session and BSS creation in NDI mode.
CRs-Fixed: 962367
Change-Id: I585cd89702a2c412783ae93fb1558ed5bfe31fd9
Add interface changes to enable NAN data path feature
Propagation from qcacld-2.0 to qcacld-3.0
CRs-Fixed: 962367
Change-Id: I12a1d0cf37db22ff0bcb8165cb3f6b3847f8bf5b
qcacld-2.0 to qcacld-3.0 propagation
Add messaging interface to support NAN datapath.
"NAN" terminology is used for referencing NAN discovery.
"NDI" and "NDP" are for NAN datapath.
CRs-Fixed: 962367
Change-Id: I1f42c8dab17b3a300db61756c29fc02d3d3bc504
qcacld-2.0 to qcacld-3.0 propagation
TDLS NSS can be changed dynamically by the user, if that happens
the newer NSS value needs to be recorded in the MAC context and
should be used to form TDLS management frames.
Update driver to keep the user configured NSS value in the MAC
context and uses the NSS value in the tdls protocol engine
to construct management frames.
Change-Id: I4098e3c5e3a03c4de6ae40c837a5616613623979
CRs-Fixed: 968106
Add new files for supporting NAN data path feature.
Propagation from qcacld-2.0 to qcacld-3.0
CRs-Fixed: 962367
Change-Id: If12d15789659d04559a9d65d6b7016d4cc595fcf
Connection tracker should not run, when the events TDLS UAPSD
and btcoex happens in the system.
Add changes in the host driver to stop connection tracker
for the aforementioned events.
Change-Id: Ib631dc986826339a4c191328f187e46f4e0392d9
CRs-Fixed: 1025613
qcacld-2.0 to qcacld-3.0 propagation
Add support for NSS configurability per vdev type
- Configure the 2g and 5g NSS with the INI value of
each vdev type
- Program the HT and VHT IE to FW for 1x1 and 2x2 mode,
FW will include them in scan probe request frames
Change-Id: I5cbf17a14ab6becad6cf5765ae5039fc284dc309
CRs-Fixed: 869026
All the regulatory and channel management functionality
moved to CDS.
Cleanup the SME redundant functionality related to channel
parameters generation and update all the code references
to CDF API's
Change-Id: Iaf4e15b4ebb7107d8bbf7a54e42f9ea9358dcdaf
CRs-Fixed: 994562
qcacld-2.0 to qcacld-3.0 propagation
Calculate and add wlan phy mode for each channel in OEM channel
info response.
Also send ANI_MSG_PEER_STATUS_IND indication for STA mode when
STA gets connected.
Change-Id: I91363e90698cabda72028135eb7fe9adeb1fbc86
CRs-Fixed: 1007004
Dwell time can be modify based on channel congestion per scan
request.
Add changes to enable firmware to use scan control flag and
select dwell time optimization algorithm based on ini values.
Change-Id: Iea3de57c1b7d087442e4b8984b4184d24bb8c930
CRs-Fixed: 994443
Currently SET_FCC_CHANNEL issues "update channel list" to firmware.
If scan is in progress, firmware aborts the scan resuting delay in
results update on the GUI. To avoid this, issue "update channel list"
only after scan is finished.
CRs-Fixed: 972208
Change-Id: I4c34010109443434bbe3abf45df7a0cf2effbee2
qcacld-2.0 to qcacld-3.0 propagation
Currently Ch 12/13 are disabled when SET_FCC_CHANNEL is issued by
framework. To meet FCC rules and to meet requirement for
other countries regulatory reduce TxPower for channel 12/13.
Change-Id: Ie833804e565f40e28845160452d3245334a34308
CRs-Fixed: 961580
qcacld-2.0 to qcacld-3.0 propagation
The HI_RSSI_SCAN feature is only meant to address the
scenario where user walks into a home which has dual band
AP and the 2.4G AP is visible initially and then the 5G AP
is visible later.
Disable the HI_RSSI_SCAN feature in the following cases:
1. Connection is a roaming connection
2. Connection is made with a 5G AP
3. Connection is made with a 2.4G AP, but the rssi is
stronger than the hi_rssi_lookup_threshold
CRs-Fixed: 975401
Change-Id: I86c63d9f8b51b6bdccc804163241ffe5640baf4d
Aggregate all the handlers of NCHO configration update
commands into a single routine
CRs-Fixed: 1007810
Change-Id: I9722dbead499f14f3969a85a20baf74aa03efff2
qcacld-2.0 to qcacld-3.0 propagation
Add INI params gEdcaVoCwmin, gEdcaViCwmin, gEdcaBkCwmin,
gEdcaBeCwmin, gEdcaVoCwmax, gEdcaViCwmax, gEdcaBkCwmax,
gEdcaBeCwmax, gEdcaVoAifs, gEdcaViAifs, gEdcaBkAifs and
gEdcaBeAifs to control edca params for STA mode.
These params will overwrite the values from AP only if
gEnableEdcaParams is set.
Change-Id: I1e688a67df320208416aba4ca40fd870a947e3be
CRs-Fixed: 996685
Add support to enable WISA feature using QCA_NL80211_VENDOR_SUBCMD_WISA
and do scan blocking on WISA mode interface.
Change-Id: Ief105310fb71779b1a8c1d580408a489cad9977e
CRs-fixed: 997798
Remove csr_neighbor_roam_offload_update_preauth_list which is
unused currently after roam synch propagation optimization for
LFR3.0 has been done.
CRs-Fixed: 1007810
Change-Id: Icc8ef8a882813d980f05314cf07a379e607323ad
qcacld-2.0 to qcacld-3.0 propagation
Currently default min_rest_time, max_rest_time and idle_time
are 50, 100 and 25 respectively.
When STA is connected in default behavior, DUT will stay on home channel
for 50 ms, then check traffic at every 25 ms increments.
If no traffic, then it will move to the next channel.
It will stay on home channel for max 100 ms. So 75 and 100
are the possible max_rest_time values.
If idle_time is reduced to lower value, better throughput
is possible as DUT need not to wait on same channel for
data inactivity.
Introduced ini params to configure min_rest_time & idle_time.
Change-Id: If28b7a30147fc11c67817314021fa502d2d8f5ad
CRs-Fixed: 952151
