Add structure peer_vlan_config_param for
WMI_PEER_CONFIG_VLAN_CMDID to support vlan peer config
Change-Id: I2f93ce2bd10d1920d33ee0e26d1b7d344813852b
CRs-Fixed: 3492156
Add APIs to init the TSF sync capability based on
WMI_SERVICE_MLO_TSF_SYNC service bit sent from FW,
per ML group.
Change-Id: I5dad3fef7ebfa2af330b95d45cac3bef862f46f0
CRs-Fixed: 3491364
Add support to trigger UMAC reset with mode1 teardown request
for mode1 target recovery SSR.
Change-Id: Ib2d1679162a2084488081c76f6753287a6e4d5c4
CRs-Fixed: 3458369
In case of MLO connection, firmware sends each vdev's
status information using extended vdev stats event.
Add support in driver to extract it.
Change-Id: I95f2a96cb7034b5b070cc6f37a97591e01e5893a
CRs-Fixed: 3483730
Adding support for reset PN value using
WMI_HOST_PEER_FT_ROAMING_PEER_UPDATE peer command.
Change-Id: Ib486d09c80878d41efa299756e655d66babd825d
CRs-Fixed: 3490034
Currently, there is no provision to identify that the driver supports
NAN pairing protocol. So, new kernel and new firmware will start
exchanging PASN frames without realization that old driver is loaded
and thus, frames will be drops in driver.
So, to fix this issue, firmware introduces new parameter in nan
capabilities to indicate host about pairing capability. Host driver
extracts the TLV to get nan capabilities and cache the max num of
pairing session.
Change-Id: I4153c7ec4d425294b0799122bf61e735184f0960
CRs-Fixed: 3492518
Set flags in WMI peer assoc to inform FW if node is
1. QCN Supported
2. Operating in Multi-AP mode
If node is 3rd party and operating in Multi-AP mode,
FW and uCode will change crypto register for each Rx/Tx from/to such nodes
Change-Id: If4cf9ec39fa11a90733df45fffa473a672643f8e
CRs-Fixed: 3488865
Roam background scan abort, driver print roam result
failed, but current ap is still connected.
Add roam background scan abort reason for roam fail
reason.
Change-Id: I32bc7202f1f49f9d36e2f2e49bce6e30ea36fa7b
CRs-Fixed: 3477755
Add code changes to handle new wmi_mlo_link_disable_event
Extract the wmi event params and store in host defined
structure.
Change-Id: I6893bfa4da7b27f4a9b1ce2936057bb3576a317c
CRs-Fixed: 3458680
1. Read the new service capability:
WMI_SERVICE_CCA_BUSY_INFO_FOREACH_20 MHz: Via this host knows
whether FW supports reporting of CCA busy info for each 20 MHz
subband of wideband scan channel or not.
WMI_SERVICE_VDEV_PARAM_CHWIDTH_WITH_NOTIFY_SUPPORT: Via this
host knows whether FW supports VDEV param channel width switch
with OMN/OMI notification or not
2. Register osif callback to send scan done indication to upper
layer
3. Add 2 new scan flags pause_home_channel and
report_cca_busy_for_each_20 MHz
Change-Id: I63d561a3c5f8e49a3ca42d956e6b630c63edeaf4
CRs-Fixed: 3460901
wmi_handle is accessed after free to set wow_enable_ack_failed flag.
Move this to correct place to fix use-after-free access
Change-Id: I8cc956bd433776adda3ff6cca26e7c164877184d
CRs-Fixed: 3485102
Get the bit value from ini config and populate the resource_cfg,
flags2 bit related to rf_switch which will be later passed via
WMI INIT command to FW.
Change-Id: Ic642dda55850a49944bcf43838c7c5c79bed3587
CRs-Fixed: 3475088
This reverts Change-Id: I5aff0a679a4e708345684f763cfadb7eb1c7aae1
which was forced merged without build sanity.
Change-Id: Id0eae813babb6f6918d157bbd67de791bf1b89a7
CRs-Fixed: 3475588
Currently the DebugFS logic in utils/fwlog/dbglog_host.c is protected
by the flag WLAN_OPEN_SOURCE. The WLAN_OPEN_SOURCE flag is a legacy
flag which had a specific use that is no longer valid. So replace the
use of WLAN_OPEN_SOURCE with a feature-specific flag.
Change-Id: I82c51efff8dfe6673c6b9d956f974cae2d21bb69
CRs-Fixed: 3464911
Add APIs to init the TSF sync capability based on
WMI_SERVICE_MLO_TSF_SYNC service bit sent from FW,
per ML group.
Change-Id: Ie8ca48f8f6065f02eefaea85ad967e32d09787fc
CRs-Fixed: 3470139
Roam background scan abort, driver print roam result
failed, but current ap is still connected.
Add roam background scan abort support for roam fail
reason.
Change-Id: I5aff0a679a4e708345684f763cfadb7eb1c7aae1
CRs-Fixed: 3470618
Update roam trigger sub-reason for common roam
and wlan diag event need update to user space.
Change-Id: I66733736d9148e3748c653d4b43a1aa6d2f438cf
CRs-Fixed: 3459385
Add a new MSD duration subfield that holds duration value
in the units of 32us. Deprecate the old subfield msd_dur_us
that holds the duration value in microseconds.
Change-Id: Id4789c550778d901cb519e53e350cc9fc66611e7
CRs-Fixed: 3446377
After receiving WMI service ready ext2 event and htt msdu index to
qtype map is derived, call CDP API to evaluate whether TX ILP can be
supported or not, update the TX ILP capability to DP, also send WMI
INIT CMD to FW to notify if host has enabled the TX ILP support or
not.
Change-Id: I472ebc5c7fa4b2996b790b58274fa3c048f6d7f9
CRs-Fixed: 3447519
Extract htt_msdu_idx_to_qtype_map array from wmi service ready
ext2 event, it is needed for DP TX ILP feature enablement.
Change-Id: I64766f5b6ebc6632ce4994a8d53224d98beb5879
CRs-Fixed: 3445507
Add gActionOUIDisableDynamicQosNullTxRate to control FW's dynamic qos
null tx rate feature.
Some APs sometimes don't honor Qos null frames with some specific rate.
This ini will disable dynamic qos null tx rate feature for specified
APs.
Change-Id: I7f76d19be6f4714166bf5761b43c7c9c7d041308
CRs-Fixed: 3451330
Add new params(ul_tid_bitmap & dl_tid_bitmap) for rTWT invite sta cmd.
This will be sent from test command to trigger invite sta.
Change-Id: I843badeb5e826ded5ab4f8083448b2b7fc4c3486
CRs-Fixed: 3456956
Currently, NDP_END_REQ TLV does not requires vdev id to send to
firmware as firmware maps the NDP session with instance id.
But in some cases, (such as testcase to valid NDP end request on
the vdev id), host needs to send vdev id also in NDP_END_Req.
So, to fix this, in NDP end req TLV, add vdev id with validity
flag to check vdev id is valid or not.
Change-Id: I23e7b1d4ce01ae87c37567f6f01adda38bf18fb6
CRs-Fixed: 3454796
Add new roam failure reason code for no ap found and final
beacon miss sent and reason code for no candidate found
and final beacon miss sent
Change-Id: I4c4813efdedd30bd65c7baf0110c292c5ae3573c
CRs-Fixed: 3437119
New TLVs for MLO link state information is introduced for
get link info command. Add WMI changes to add these TLV in
get link info command
Change-Id: Ib8d12a727ac6f59257dcce69174271330a065c77
CRs-Fixed: 3431076
This change is to populate wmi service for 11az TBR rsta.
Also, this adds host based enum id for corresponding wmi service.
Change-Id: I9687855651bff222616adb3a8cf346e6264688ee
CRs-Fixed: 3437035
Since special vendor roam log is not need for common roam,
add flag to filter the log.
Change-Id: Ide67de16ae68c507a7b4e81672cbf5e0fc0e4c5d
CRs-Fixed: 3442621
Add support for WMI_CSA_IE_RECEIVED_EVENTID as:
1. Register the handler
2. Handler to extract the event
Change-Id: I9f476c7fbc51d9686d05fbdb5f46dec3bcd3c29e
CRs-Fixed: 3431363
Read the new service capability:
WMI_SERVICE_TDLS_CONCURRENCY_SUPPORT for TDLS concurrencies
support. With this service capability below concurrencies are
supported:
STA+TDLS+P2P
STA+TDLS+P2P+P2P
STA+TDLS+P2P+SAP
Host driver will check this capability to disable TDLS
off channel when concurrent interface comes up. If this
service cap is not advertised by the firmware then
existing TDLS connection will be teared down when concurrent
interface is started.
Change-Id: I744775080a22ca8f3bc88894c349916eea27fd3a
CRs-Fixed: 3414266
Add new params(ul_tid_bitmap & dl_tid_bitmap) for rTWT remove sta cmd.
This will be sent from test command to trigger remove sta.
Change-Id: Id68c020a18e3e418ad6605f27827ab755f8eea53
CRs-Fixed: 3431178
