Add support to trigger UMAC reset with mode1 teardown request
for mode1 target recovery SSR.
Change-Id: Ib2d1679162a2084488081c76f6753287a6e4d5c4
CRs-Fixed: 3458369
Add device Id and target type checks for qcn6432 target
compilation
Add CFR and spectral support for QCN6432
Change-Id: Ic908fa768aa1be7cfc40be7fcc7f9ca6aa85aaa6
CRs-Fixed: 3351747
Extract htt_msdu_idx_to_qtype_map array from wmi service ready
ext2 event, it is needed for DP TX ILP feature enablement.
Change-Id: I64766f5b6ebc6632ce4994a8d53224d98beb5879
CRs-Fixed: 3445507
Mark the blanking support as not supported and
return success status for AR9887
in target_is_scan_blanking_enabled().
Change-Id: I055f4d3b30781189744b0d96db4a93b61c0cf1f4
CRs-Fixed: 3430100
The kernel-doc script reported documentation issues in
target_if/core/inc/target_if.h, so fix them.
Change-Id: I3c539f3a581f5886c013e34fa54904899cbe9d17
CRs-Fixed: 3417467
Extract the scan blanking feature support from WMI service ready
event and store it in target if data structures. Add API to check
whether scan blanking feature is supported for a given pdev.
Change-Id: I65fefbb879b8433a68338bfcd3e4f729eff3ddd8
CRs-Fixed: 3413922
Currently, firmware sends WMI_WLAN_FREQ_AVOID_EVENTID with set
of frequency ranges to be avoided when it finds LTE operating
around those frequencies. Host driver marks these frequencies
as unsafe and doesn't operate in SAP/P2P-GO mode.
There is a new requirement where SAP can be allowed to operate
in unsafe channels when below conditions are met,
1. Firmware advertises the capability fix_channel_priority in
WMI_COEX_FIX_CHANNEL_CAPABILITIES through ext2 event.
2. SAP is started in a fixed channel.
Fetch the capability fix_channel_priority sent by firmware and
cache it in wlan_psoc_host_service_ext2_param to support
this feature. Add APIs to cache value received from firmware in
psoc_info->info.service_ext2_param.sap_coex_fixed_chan_support
and to fetch the same.
Change-Id: I8ceb501240bc86d6b004446f9927f4402c487203
CRs-Fixed: 3381399
Special vap on AR9887 (ap_monitor) is used as both monitor and
AP mode. During channel change on DFS channels, vap is not up till DFS
CAC timer completes and hence cfg80211tool is not releasing the
rtnl_lock.
For Scan radio, CAC timer can be disabled on DFS channels.
Change-Id: I6142325892401e3a374760179ec7e4e206296f33
CRs-Fixed: 3341288
Add support for mlo groups in mlo soc/link setup and teardown
sequence participating in mlo.
Change-Id: I2b431b0ee1e5816b92ad183b52ad2998eb5bb46c
CRs-Fixed: 3343170
To assist the Host in ML reconfiguration element construction for probe
responses, FW sends MLO link removal information as part of the MGMT Rx
event containing the corresponding probe request. This information is an
array of TLVs, one TLV for each link that is undergoing link removal from
the MLD for which this probe request is intended. The TLV carries the link
removal TBTT countdown value maintained by the FW for that link.
Add support to extract the same.
CRs-Fixed: 3335361
Change-Id: I16c6791a443ddb166da596d404a52ff2a38da291
CFG section definitions for 6 GHz low & high band for
ini configurations. These new definitions enables us to
configure the unique INI parameters for 6 GHz low and
6 GHz high band, for new solution of Split-phy in 6 GHz.
Change-Id: I1417dee90f0aebe31f24a64017d9203b74dfc886
CRs-Fixed: 3332719
Add void keyword to function definitions for
ce_service_srng() and target_if_get_ctx().
Change-Id: I4d74600da82a9f13285a496a2136589b698da017
CRs-Fixed: 3336700
While generating the scan entry for TX VAP, the decision to
strip MBSSID IE from the TX VAP beacon, will be taken if the
platform supports 11BE.
CRs-Fixed: 3300515
Change-Id: Ie45da7a02a2811172b2403d5fd1bc4b9271432d5
- target_if layer was calling UMAC layer wifi_pos_get_rx_ops(). This was
leading to compilation errror in WIN platform. Hence, added target_if
layer API target_if_wifi_pos_get_rx_ops().
- WMI_RX_SERIALIZER_CTX is used to register PASN peer create and delete.
WIN platform does not use the above context. Hence, use WMI_RX_UMAC_CTX
for WIN and WMI_RX_SERIALIZER_CTX for MCC.
- WIFI_POS rx_ops callbacks are registered in target_if layer. But, these
callbacks are called by UMAC component. Hence, move this registration
function to UMAC layer.
- Add an API to convert host PASN peer type value to target defined value.
Change-Id: I2a262121f959c2343e88158b94468d104b9e164c
CRs-Fixed: 3289852
Any error during ext/ext2 processing should stop normal init
path and return error. Without this, wrong values are passed
to firmware in WMI init which result in firmware assert.
Add proper handling to take care of failures during svc ready
message processing
Change-Id: Id22714a983d1dc2fe7300a178933cd05bf870a55
CRs-Fixed: 3290131
Adding feature flag for Health Monitor so that it can be disabled
for 16M and 256M profiles
CRs-Fixed: 3277434
Change-Id: Ibbbe582acd15ebff7e189fcbaa36429ea519db37
Add infra to support Dedicated Bluetooth Antenna Mode (DBAM)
feature. It is used to switch between dedicated antenna for
BT and shared antenna for WLAN and BT.
Change-Id: I21688093674ef9b63ee811df9168a31bd71c56b5
CRs-Fixed: 3239895
Fix TWT configuration for 2.4 GHz PHYB mode MAC.
Change is macro protected. Wlan resource config sets twt_ap_pdev_count
to number of Radios per psoc. But for 2.4 GHz vap coming up in PHYB
mode needs the value 2 if only one radio is enabled per psoc. WAR is
done from host driver to enabled TWT certification process. Actual fix
must be done from Firmware code.
Change-Id: Id29692097ee555c94c54f53d7540eb108fbe98e0
CRs-Fixed: 3238210
Add support to manage Wifi pos vdev private object. Add new peer
type in enum wlan_peer_type. Add rx_ops and register the rx_ops
for PASN peer create/peer delete request.
Register 11az PASN related WMI events in target if.
Change-Id: I2a5e4d8d7c9b9562d9ab02b287957e93ee6f4758
CRs-Fixed: 3154521
1. Since peer id is reused for reconnection in MLO case,
old entries for queue desc addr is cleared. Clear the reo
internal storage and reset it back on client connection.
2. Send Qref feature WMI cmd to FW to enable the feature.
Change-Id: I6705ce121c8c25d9a2ace039dab21312fa5ea4b1
CRs-Fixed: 3156642
Remove Legacy Qwrap max client mode code as part of Legacy
RE code cleanup. Old change (same code changes as new) was
reverted as some PF checks were missing/skipped before merge
due to an IT issue
Safe to merge now as IT issue has been resolved and all PF
checks are enabled again before merge.
Change-Id: I2f6ae57a27d50c31115d89e57281dc1f7094d71d
CRs-Fixed: 3125196
Trigger MLO teardown and wait for response before proceeding with soc
power down.
Change-Id: Ie1d00408862459b0e5240ef3151a0d969ab65e80
CRs-Fixed: 3102143
Skip sending triggers for MLO setup if a soc is not mlo capable to avoid
inconsistent MLO setup exchange with target.
Change-Id: Ie17dcd03e2fcf778795d964a55e4a400adacfb33
CRs-Fixed: 3100309
Add support for extracting SBS Lower Band
End freq from rx service ready event.
Change-Id: I402d7519507fbce733a000a546473aa00e8844d5
CRs-Fixed: 3065158
In dfs test mode, bandwidth detection test on dfs channel fails
with QCN7605 chip, reason is some pulses will be discarded due to
low rssi reported on some frequency channel, it's different halphy
design for QCN7605 chip, so need to define rp_rssithresh for QCN7605
chip to different value.
Fix is define rp_rssithresh for QCN7605 chip to different value for
FCC/ETSI/JP W56 table which are used for dfs certification.
Change-Id: I9132cf82e6d8d97f83ebb4cd8586f8d8ff48066e
CRs-Fixed: 2986947
hw_link_id is unique across psoc to identify pdev in multi-soc ML cases.
Exract hw_link_id from mac_phy_cap and provide APIs in target_if to set
and get this for pdev
Change-Id: I9dcc4c1e4b515e83151ca88f5f026c0dd0b04646
CRs-Fixed: 3023496
With latest architecture there are different HTT peer
data versions supported by the firmware, supported htt peer
version will be sent in the service ready and need to feedback
to the firmware in the init command.
Change-Id: Icd0470843198387cd7e0192cbe3821d45ef0534e
CRs-Fixed: 3008706
Add TWT service bit capability support to check whether firmware
supports ack event or not. If firmware doesn't support ack event
then service bit capability will become 0 and whenever TWT
command comes, host will not wait for ack event and sends command
in a legacy way.
This support is mainly added to handle new host and old firmware
combination.
Change-Id: I55d373c2e017130b58a4b332da16f0eda8f34eba
CRs-Fixed: 2987749
This reverts change-id I176b9c09106cc0d7f5cfbc474912e4a48d633ff2.
The 0 count chan avoid event is used to clear all previous reported
chan avoid freq range, so it can't be skipped.
Change-Id: Ie01d88c353a7f71bbee70ae67f54147ea147f6d4
CRs-Fixed: 2970061
Updated the EHT related variables as per latest fw cmn headers.
Address review comments from previous EHT gerrits.
Change-Id: I67cd58a4efcf3e06d2ca3b5570432593b1d80825
CRs-Fixed: 2902607
