Add srng disable function for 5332. This is required for
umac reset feature. Also, Avoid srng disable for lmac
rings.
Change-Id: Ieccc86134ee4d1cc3cd8a31a62f8fdf3afd5faf9
CRs-Fixed: 3599325
1.Enabling CFR capture for pebble.
2.Clean up redundant check for Pebble while fetching rtt info
3.Clean up redundant check for Miami while fetching rtt info
4.Add 2023 to copyright year
Change-Id: I2ac845a1c5914004a0af4a007264d0cd5f431d3f
CRs-Fixed: 3596397
Fix compilation issues when below macro are undefined
a) WLAN_PKT_CAPTURE_TX_2_0
b) WLAN_TX_PKT_CAPTURE_ENH_BE
c) BE_PKTLOG_SUPPORT
d) DP_RX_MOM_MEM_FRAG.
CRs-Fixed: 3571652
Change-Id: I066ace0b51fd628d31b2d7161765bf9d0c405549
In case of WORD MASK subscribtion enabled, get phy_ppdu_id
from RX pkt hdr tlv in case PKT_TLV_HDR is subscribed.
Change-Id: I40e1b01c2f52404872c39df6d9faa57a95dad5c2
CRs-Fixed: 3582126
RCC mode of CFR capturing was not working on miami as
bb_captured_channel field which is being accessed from
RXPCU_PPDU_END_INFO tlv is not being set in host.
These fields of cfr are fetched from HAL_RX_GET()
which is being failed to read by host as it
follows 32 bit approach and miami uses 64 bit format.
Reading 4 bytes is not enough ,So changing HAL_RX_GET()
to HAL_RX_GET_64() and this will read 8 bytes with
which we get elements properly.
Change-Id: I8c669e5cc78ce856c1bc4b0449125aac45461a9b
CRs-Fixed: 3572563
Currently in monitor mode, links are released to WBM through the
SW2WBM_RELEASE ring and WBM will feed the links back to RXDMA
through the WBM2RXDMA_LINK_RING.
WCN6450 uses SOFTUMAC architecture where WBM is not present.
Hence the WBM2RXDMA_LINK_RING is repurposed to SW2RXDMA_LINK_RING
where host will directly release the links to RXDMA using this ring.
Change-Id: I110f607e38c4c2ab10eb1bd7b1f5a7bce2f03692
CRs-Fixed: 3493368
Currently QCA_MONITOR_2_0_SUPPORT macro is used for both TX and RX 2.0.
but on MCC side, only RX 1.0 is supported and as part of this feature
TX 2.0 need to be supported.
Enabling QCA_MONITOR_2_0_SUPPORT will enable both RX 2.0 and TX 2.0, but
to support RX 1.0 and TX 2.0, we need to separate out code under
QCA_MONITOR_2_0_SUPPORT to TX and RX 2.0 macro.
As part of this change, introduce separate macros for TX 2.0 and RX 2.0
and move the common code under both macros.
Change-Id: I7ef7e488800934291538a0bca9acd21e28901214
CRs-Fixed: 3415740
Increase the DBR ring to support DBR module
DBR_MODULE_CBF standalone sounding CV data
for QCA5332 target.
Change-Id: I4ab0741d92c7c7a32243173c87d022befa702399
CRs-Fixed: 3456418
The kernel-doc script identified some documentation issues in the
hal/wifi3.0/qca5332 folder, so fix them.
Change-Id: I780f8d20f6c9a22229dcd007ac4bb8f10174e1db
CRs-Fixed: 3406555
change allocation location for reo qref table.
per probe allocation results in mem alloc failure when
frame is fragmented
Change-Id: I5922bddebcd0577ba38734ae7d4194d726d825aa
CRs-Fixed: 3326520
Initialize ppe related function pointers to null for 5332 and add a
check before calling the function pointer.
Change-Id: Idcaecfa839ff6822ab385053405256c201579bda
CRs-Fixed: 3378893
Add changes to move ioremap of PMM SCRATCH register outside
interrupt context, as ioremap in interrupt context in not valid.
Change-Id: I0fa645c55e10a5241011a1f4ffdccdca48c50d29
CRs-Fixed: 3371194
Add a new api to read tsf2 and tqm scratch register for qca5332.
The function to read these registers are different from that of qcn9224
since qca5332 is a AHB radio and reading register involves ioremap of
address range.
Change-Id: Ib05df2ddf528594ae67109f8bcb409424a4350a2
CRs-Fixed: 3331476
1. Changes to get correct write address in hal_get_window_address_5332.
2. Fix for monitor init crash - Added dummy entries to match the
ring_id.
Change-Id: If59b1c231d4595a95e7c1f02de1dbe0ce27a8805
CRs-Fixed: 3268933
For Beryllium LMAC rings, hal_get_srng_ring_id() provides the ring IDs
separately per each LMAC only if that LMAC ring is a destination ring
(This is done to use a common source ring for the DMAC rings).
But the ring IDs for LMAC source rings like DIR_BUF_RX_SRC_DMA_RING are not
being provided separately per LMAC. As a result, these ring IDs in
split-PHY mode are colliding for the 2 LMACs.
Fix this by doing the following.
- Mark the DMAC common rings within the LMAC rings.
- Provide ring ID separately per each LMAC if the ring is an LMAC ring
but not a DMAC common ring.
Change-Id: Ifdae085b5784a03763abfc4edb42d94593e3ea21
CRs-Fixed: 3282702
In QCN9224 fetch the peer meta data from the msdu end tlv
instead of MPDU start
Change-Id: Icd9420cd83e06abe5e54e9e05cc8cbf8d8312ae1
CRs-Fixed: 3245626
1. Changes to move hal_tx_config_rbm_mapping_be function from common to
device specific as it has ppe related snippets.
2. Changes to remove all PPE related codes in QCA5332 hal code.
3. Changes to correct macros according to fw_hrs.
4. Changes to move functions with device specific Macros to header files
so that it gets compiled with respective device's FW headers and gets
correct Macros
Change-Id: I479b406f318aa42d2b1032349aaf42d95b8c18e5
CRs-Fixed: 3235966
