When WDS_EXT feature is enable, Host needs to redirect
the data packets to WDS extended netdevice.
Change is added the support for forwarding the RX packets
when received from IPA as an exception by deriving the
correct netdevice interface.
Change-Id: I083a1acc72023f3ebe6ea36ec05a5706f89c16bc
CRs-Fixed: 3597357
As cookie format is different between LI and BE have
different global descriptor pool for Lithium and
Beryllium
Change-Id: Idd222f4009c017a1bc4bc4b14043b36d927a9e27
CRs-Fixed: 3608792
Add support of CDP API's to create, attach,
detach and destroy MLO device context
structure in Datapath
Change-Id: I0c2019b70f12639de949ebe5bec44f1f202cff6b
CRs-Fixed: 3566879
-Moved the get macro from qdf to cdp layer.
-Removed the set macro from qdf and replaced its usage
in be rx layer with an existing HTT ml_peer_Valid mask.
Change-Id: I4a87b4b560f983c5aa6d026481a88d28e2ff09fd
CRs-Fixed: 3488425
Add CDP api support for umac reset init API, these apis are expected
to be called whenever shmem is deinitialized.
Change-Id: I307c586454580ab8f83b0d515defa93d4e8ff656
CRs-Fixed: 3458268
Add CDP api support to notify asserted soc info to DP
umac reset module, to disengage a asserted soc from
umac reset process.
Change-Id: I92ee07ed90243567dab83d0686022c8327efe1b6
CRs-Fixed: 3428265
Add HMWDS rem-addr support to delete AST WDS mac entries in
Beryllium chipsets.
Change-Id: I5623bac02b326d1d668ad5e1fdcfc3a9f8cbbb9c
CRs-Fixed: 3397961
The kernel-doc script identified a large number of kernel-doc issues
in the dp/inc folder, so fix them.
Change-Id: I6213164d2209cc4de9684ae66281ee2999f82672
CRs-Fixed: 3375078
In enum verbose_debug_module the enumerator hif_vebose_debug_mask has
a misspelling, so fix it. But introduce a macro to map the old name to
the new name to prevent build errors for existing users.
Change-Id: I03932bf11a546cecfa4df478f028bc56b6891148
CRs-Fixed: 3374268
Add support to read TSF2 and TQM scratch regitser in the HAL layer
for WKK v1 and v2 board.
Change-Id: I0ef5e8cf4e06c0b5c98169252a81f70989285d2d
CRs-Fixed: 3321782
In SAP due to intrabss forwarding, Tx ring update is going through
when WOW enable command has been sent to FW. This results in crash.
To fix this, do not update HP when apps suspend is in progress.
Change-Id: Id4176224563bdd759828397fa1cd23de1598192e
CRs-Fixed: 3294407
Only in 11b mode, exclusive of other legacy modes(11ag) will
the NSS obtained from the TLV header be invalid, which is 0
and cannot be resolved. This change will set nss to 1 in 11b.
Change-Id: I93e8bdb125764fb0247265da328929ecc837fb84
CRs-Fixed: 3275793
Driver is able to get rates info per MSDU, which can
exclude special frames like ARP, DHCP, etc. This change
is to refill the rates info parsing by rateflags from FW,
including legacy rate, MCS, NSS, BW, preamble, GI, etc.
Change-Id: I043c3ba5c2a06019f3e9bd1765e6b8430174cf6b
CRs-Fixed: 3263832
Call UMAC reset initialization API from soc_attach_target().
FW exposes a service bit for this feature, use that to conditionally
enable this feature. Also, add default log levels for this feature.
CRs-Fixed: 3253464
Change-Id: Ia7c9cf07a7ab7b000ebe452ab074a82173b70129
Add changes to support flushing of MLO peers only.
This is required to support the mode-1 behavior of target
recovery feature, where we delete MLO peers and retain
legacy peers across SOCs which are not crashed.
CRs-Fixed: 3243549
Change-Id: I5ae326bfffd1267768c83fd7f60fa1343ef305fe
Currently, if mld and link peer has the same mac
address, the peer cannot distinguished with
just the mac address as the search argument.
Hence to support same mld/link peer mac address,
cdp_peer APIs that uses both link and mld peers,
are also given peer_type info. This helps
to perform the operations on the correct peer.
Change-Id: If646755facc8f9a4d9fed2f31c5cc6618fa9a952
CRs-Fixed: 3043428
Enable bits in WMI_INIT command to let the FW know about host's
capability to support notify frame feature. If the feature is enabled,
host can mark certain TX frames as "notify frames" for hardware and they
need not be sent to FW. FW depends on this capability exchange to decide
whether to install HW rules for frames to be sent to HW.
Change-Id: I7158e79ae0fbdc73a2f4096ae1577337e8291246
CRs-Fixed: 3209399
Since more than one components depend on reap timer of
monitor status ring, add bitmap to record the trigger
sources of the timer and refine the APIs/calling functions
accordingly.
With this change:
When a new start request comes, if the source is
CDP_MON_REAP_SOURCE_ANY, skip bit set, and start timer
if any bit has been set in the bitmap; while for the
other sources, set the bit and start timer if the bitmap
is empty before that.
When a new stop request comes, if the source is
CDP_MON_REAP_SOURCE_ANY, skip bit clear, and stop timer
if any bit has been set in the bitmap; while for the
other sources, clear the bit and stop timer if the bitmap
is empty after that.
Change-Id: Idaa7837c4b93b247ff2236aa5072d309fa9548c2
CRs-Fixed: 3190347
In VoIP cases, no or minimal packet drop is expected during
roaming. Currently, data packets are dropped in host if they
are received after roam sync indication from firmware and before
peer map indication is received due to invalid peer.
This change allows rx UDP data packets during roaming before
peer map indication is received from FW if peer's auth_status
received in roam_sync_indication from FW is authorised.
Change-Id: Ic518b7cd0aef48a2b0f8c923a2e20838b07f3d1f
CRs-Fixed: 3168603
In QCN9224, when 11v DMS feature is enabled use
FW based DMS support instead of SW based WAR.
Change-Id: Icc5b9740f71bd00862e06950e4fe49c663d513b4
CRs-Fixed: 3182547
Currently, in case where AP advertizes BA window size
which is different than our max supported BA window size,
the HW gets configured for BA window size advertized by
the AP, whereas the ADDBA response indicates the window
size of the STA, which is less than the AP.
This mismatch leads to the BA bitmap to be incorrect.
Fix this by exposing an API from datapath for the update
of the final BA window size which is populated in the
ADDBA response.
Change-Id: I81a039f47a775990b426e9aca1daaaa9bdb6e88f
CRs-Fixed: 3187941
With new configuration changes for enable_peer_extended stats, update
code to peer_extended_stats naming for clean codebase.
Change-Id: I97a7ee331042232098382683fefebd05e6b099c3
CRs-Fixed: 3149920
The per packet info feature can be enbaled to support enhanced
stats independent of mesh mode.
Change-Id: I852e7a958c520901b6f418d30deb53fa2f68fb68
CRs-Fixed: 3079000
Add support to invoke HIF runtime PM APIs in TX packet path based on
throughput level. Essentially at high throughputs, where runtime PM is
not expected to provide power gains, invoking the APIs is deterimental to
performance.
Hence invoke runtime_pm APIs based on throughput level.
CRs-Fixed: 3059712
Change-Id: I49d111bffa8a37c68abbdd54911f9ecc22430562
This change is used to provide an API for PMO module to
check whether there are pending TX frames before HOST sends
wake up indication to FW. PMO module uses this to indicate
FW whehter to discard HWDTIM.
Change-Id: Icc3271e87e376e3313fddc5f4f99e39daeaf6af7
CRs-Fixed: 3046947
Add a CDP api to update the packet capture mode in dp_soc
when it get updated by user using vendor command.
Change-Id: Id0856aeeb5e1a77e1ce6fb23562fdbff4a2fb320
CRs-Fixed: 3048344
wds in Beryllium is managed by hardware.
Make use of hardware managedwds and disable
the corresponding wds handling done in host
for Beryllium.
Change-Id: I39f23cb40c6c5f85ada8ce59c92ff2855bb18da3
Any update to the SRNG TP/HP when the device is in low power
state would result in system errors. It is recommended to disable
EXT grp irqs and drain TXRX before sending power save enter command
to the FW. This will ensure that no interrupts are received while
in power save mode and as a result there wont be any HP/TP updates.
Change-Id: Ibf952bbc2c6d13fb3e4ca6b4845bc9cc887fa694
CRs-Fixed: 2883135
