WCD938x codec is a soundwire based codec that supports AMICs, DMICs,
Headphones, Ear and Aux paths. Add support to enable all device
paths of wcd938x codec.
Change-Id: I81b5e603ef73afba74b8d2274012752f9ca5cb6f
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
snd_soc_codec is removed from kernel-4.19.
Update machine driver to fix compile error.
Change-Id: I1bdfda07c0d150d008c434c361142b655de1e9db
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Some alsa API are removed in kernel-4.19 which would cause
codec driver compile failure. Update codec driver to fix it.
Change-Id: Ie358ec1863082166958059c179300b453d2a03ad
Signed-off-by: Meng Wang <mengw@codeaurora.org>
snd_soc_platform_driver is removed in kernel-4.19.
Update snd_soc_platform_driver to snd_soc_component_driver.
Change-Id: I434b6fd173d1f4365a610d9164342d5d04d6c5bc
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Add machine driver for Kona with stub codec.
Change-Id: Ic214324e22e2eaeaa2651e4fbeb8fd187aeb458e
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
chmap in msm_lsm_check_and_set_lab_controls, data in
wcd9xxx_i2c_write_device and irq_level in wcd9xxx_irq_init
are Variable Length Array (VLA). VLAs are considered unfit
when it comes to security, performance, code quality and so
on. Hence, allocate the memory dynamically.
Change-Id: I52f33e61f857a00774eb26dc1d6372f2ed3d425c
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Switch audio drivers to SPDX identifier on msm-4.19.
Change-Id: Ic3f0230a516db251b8d81e8a7e73dbc04d66fe1b
Signed-off-by: Meng Wang <mengw@codeaurora.org>
On kernel-4.19, setup_timer is changed to timer_setup.
Update ep92 driver to fix compile error.
Change-Id: I844241413c72c415819774921f267d84692ba177
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Update app type config get function and userspace can
get the app type config with mixer control.
Change-Id: I78eda2963161936ae1dbf90dad1bfb64cb079e8d
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Move struct snd_dec_ddp from uapi folder to msm-compress-q6-v2.c to
avoid code check warning.
Change-Id: Id33eee6da8f42841c80e7e5795bb19e71ab6e784
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Zdet current source is enabled for 4 pole aux cable and kept
even after plug removal. This increases voltage for both hph left and
right which causes error in cross-connection detection for subsequent plug
detections. Remove current source enablement from unrequired places.
CRs-Fixed: 2234559
Change-Id: Icffbca88f7a6873c509c91e31b494dd6d5d21cb9
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
The clk users count goes out of sync with the actual
clk requests from clients during SSR/PDR. Increment the
clk users only after the clk request is successful.
Change-Id: I512f037a118f4763a64e7a64f7f559bcfa37a37f
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
On headphone path, cold start output latency
is not met. Optimize delays during HPH DAC
and PA paths.
CRs-Fixed: 2338278
Change-Id: If96975d664fc655a4ac38a9d6ed88b6af61adfdf
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
On headphone(HPH) path, CnP spec is not met.
Handle sequences for bolero and tanggu codecs
as per HW sequences. Disable vdd_buck during
system suspend when no usecase is active.
CRs-Fixed: 2343436
Change-Id: I62f89d829715f07885a97531fdcb2cc3ca0822ef
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Microphone Activity Detection (MAD) hardware in the codec is used to
perform detection of audio/beacon/ultrasound audio activity on the
microphone. Add routing controls and configuration to enable the
capture support for MAD in WCD9335 codec.
Change-Id: I48359c6069bbebfc7f58efc24654544309912b69
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
Signed-off-by: Raja Mallik <rmallik@codeaurora.org>
Use soc_find_component locked version to ensure proper
access of component list while trying to find wsa
components from the list.
Change-Id: I1960d5b023c3d59f5c97ca0f616b4d9e39c15c50
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
MICBIAS1 is mapped to MICB2_VOUT. Replace it with
MICBIAS2 as MICBIAS2 is used for mbhc detect.
Change-Id: I23bade728f0c5b9de75d78ccb70e57d74f01adbb
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Enable compilation for sdmsteppe target and also fix
compilation errors.
Change-Id: I18a13764415ae955843706943e338bb575c11853
Signed-off-by: Md Mansoor Ahmed <mansoor@codeaurora.org>
Reduce auto suspend delay to 100ms from 1500ms for voting LPASS
NPA resource to reduce delay in entering LPASS into island mode.
Change-Id: Ic38f7b9e8d794963e51c30dfd03da586bca84bd2
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Pop is heard after PDR is triggered. This is
because while device down PA is still on.
Disable PA before SSR device down to prevent pop.
Change-Id: I6bfe3e731bdf60fba8fee90ab39c03a0512006ce
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
lpaif_muxsel_virt_addr to select AUXPCM or I2S is not needed in
machine driver. ADSP would select AUXPCM or I2S according to
afe port.
Remove related change in machine driver.
Change-Id: I55520a56bab2134a08e86909b98eb15d588c53ba
Signed-off-by: Meng Wang <mwang@codeaurora.org>
