Move SR changes from WMA to Target_if and remove
WMA api's which was previously using to update
SR threshold.
Change-Id: I219cd56195471df561a5789fb235e375a14e756c
CRs-Fixed: 3374674
Add vendor command API to set EPCS (Emergency Preparedness
Communications Service) capability and trigger EPCS
function enable or disable.
Change-Id: I2ffe4d268731c57dd6e3ddfe0586d4dcb77dc611
CRs-Fixed: 3511170
The issue is host always uses assoc link channel width
to calculate the list of the channel(s) to trigger
wide band scan for both links.
In the case of N link MLO connection, the associated
channel and associated channel width may be different
for assoc link and non-assoc link(s).
Fix is to choose the proper associated channel width
and prepare the channel list for each link(s).
Change-Id: I2fce5d1153d396f1bfc9575572d90d2cfec0ac8a
CRs-Fixed: 3539444
In api mlme_connected_chan_stats_request(), dereferencing
of freed pointer is observed by static analysis tool.
Remove dereferencing of the freed pointer in the api
mlme_connected_chan_stats_request().
Change-Id: Ic09b68395a9c3c67aab4a704a915b0d92a00e16d
CRs-Fixed: 3530020
Add vendor command support to configure MLO and EMLSR mode
capability configuration for EHT testbed and DUT STA. It
includes EHT OM control support, EMLSR padding delay
configuration, enabling STR MLMR mode, forcing power save
on active MLO links for a defined number of beacon periods,
forcing active MLO links, and invoking EMLSR mode entry or
exit.
Change-Id: If4fb2c576b789aa2e28d6742a02ebdc01eb6e994
CRs-Fixed: 3507770
Disable BSS color collision detection for the following-
- Testbed STA for all modes
- STAUT if EHT mode is EMLSR.
As part of BSS color collision detection, scan is invoked in
FW after the defined detection period and as part of this,
EMLSR exit happens in the middle of tx/rx. Thus, disable the
capability for EMLSR mode.
Change-Id: I6417f7c081c1408372924b20d8985a597a536e27
CRs-Fixed: 3507796
Add check to determine whether FW support multipass
SAP before enabling multipass support
Change-Id: I7db5a7bad6b9ac89c8c4e7c4c177695671402657
CRs-Fixed: 3515310
Update Preamble Puncturing INI parameter "he_rx_pream_punc" to
default which gets from FW.
Also update the cfg HE 2 GHz and 5 GHz capabilities parameters
instead of memcpy.
Change-Id: If424ce4a4fe771a2817677a50a472a2c77529d90
CRs-Fixed: 3515585
Set MAX supported BW for STA so that the device can connect
to APs which are advertizing 20 MHz in beacons but increases
in association response and next beacon.
Change-Id: I8ed418382f696c7461235996c4e90201cafafcb3
CRs-Fixed: 3415718
Process GET_CU_FOR_EACH_SUB_BW request from the upper
layer in case DUT is connected with a channel width
of 40 MHz and the connected frequency is in the 2 GHz
band.
Change-Id: Idc748f83af72baed946340c61d5c6a0bba1baf00
CRs-Fixed: 3506871
When link removal TBTT expires, indicate the link removal
info to upper layer by vendor event.
Change-Id: Iccc13898f76648bfa2167669c966538d95df5fe3
CRs-Fixed: 3482159
Add support to boost or reduce MLO scoring with
mlo_tp_preference_percentage ini.
Change-Id: I0a1280fe259d9e65e5f0f991d456f650b9d1be69
CRs-Fixed: 3456412
Add function wlan_mlme_convert_he_op_bw_to_phy_ch_width, check 80+80 or
160 with ccfs0 and ccfs1.
Add 20M/40M check for vht bw with prim chan id and ccfs0.
Change-Id: I01a407358d7c310f92c8a69004ebb002b615438a
CRs-Fixed: 3511291
Chan width 1 in vht operation means >=80M, while chan width 1 in eht op or
he op means 40M, need be handled in different way.
Change-Id: Ib65dca6245c33f07df351b6ac7eed86f91b372c7
CRs-Fixed: 3506080
When ANI_LITTLE_BIT_ENDIAN is not defined, a compiler error is
flagged in the definition of struct mlme_ht_param_info due to a
misplaced #endif, so relocate it.
Change-Id: I72df79a1dfae84c2cd6797d1d112de6ef8ca7ef6
CRs-Fixed: 3498279
Host parse newely added vendor command
QCA_NL80211_VENDOR_SUBCMD_CONNECTED_CHANNEL_STATS and trigger
scan to get connected channel stats from FW in case of MLO
connection.
On scan done host sends scan done indication to upper layer
via QCA_NL80211_VENDOR_SUBCMD_CONNECTED_CHANNEL_STATS vendor
command.
Change-Id: Iff09b6dfe88b5f075a4c81d8f0bfff5bbb0fedaa
CRs-Fixed: 3491058
Add a new cfg item to drop connection request if
AP is operating in 6 GHz SP mode and STA doesn't
support SP mode but supports VLP mode.
Change-Id: I0f20d63f68b2424390ca424188f95f26971c9ada
CRs-Fixed: 3470602
relaxed_6ghz_conn_policy cfg item is no longer needed
with new regulatory policy as there is no dependency
on STA, AP country code to find 6 GHz power mode for
connection and also connect request should be rejected
if AP is advertising VLP and STA doesn't support VLP.
Hence remove this cfg item and the related APIs.
Change-Id: I3a48a3c6343e57f4f2386ebbab1f88d5052af505
CRs-Fixed: 3470571
Roam background scan abort, driver print roam result
failed, but current ap is still connected.
Change roam abort background scan log instead of fail.
Change-Id: Ia10f010e8c353b12bdbbe0407c8e3d30b1ea45c2
CRs-Fixed: 3469290
As per requirement, for MLO connection host should reject
GET_CU_FOR_EACH_SUB_BW request and return failure to upper
layer as a response.
Change-Id: I8177d92982c832a17c1657239b69cc3712e1eaf4
CRs-Fixed: 3476349
If STA connected with MLO AP, don't process ch_width update
with notify request.
Change-Id: Id2e0d6357feac13787abcafe8b9d69a0c64dbedb
CRs-Fixed: 3472173
Host receives QCA_WLAN_VENDOR_ATTR_CONFIG_CHANNEL_WIDTH vendor
command indication to update STA adapter channel width.
On receiving channel width update indication from upper layer,
first host updates internally and send new channel width value
to FW via WMI_VDEV_PARAM_CHWIDTH_WITH_NOTIFY.
Target firmware should take care of notifying associated peers
(except TDLS) about change in bandwidth, through OMN/OMI
notification before performing bandwidth update internally.
Change-Id: I517ed1fbf8d074e511f8fb43c9c1dac824c9f084
CRs-Fixed: 3469473
To process get_cu_for_each_subbw request from upper layer,
host needs to trigger scan for initial connection ch width
on every get_cu request.
Change-Id: I2bbf20c9207f46983b14dcd95bf81f32cfd7c060
CRs-Fixed: 3466958
eMLSR + NAN concurrency is not supported currently, so handle it
as mentioned below
1. eMLSR+NAN: If NAN is coming up when eMLSR is active, disable
one ML link so that eMLSR gets disabled.
2. NAN+eMLSR: If eMLSR is coming up when NAN is already enabled,
disable one link so that eMLSR doesn't get enabled.
Also, cleanup the APIs to carry a generic flag to indicate that
a concurrent connection is coming up instead of mode specific flag
as there is no dependency on modes to handle concurrency.
Change-Id: I625f8b18f9d7e991922d22af53f3e8743a3727bd
CRs-Fixed: 3443900
Stub exist for functions that does not exist. Was introduced as
typo that was fixed. Remove the stub.
Change-Id: I59797783ddec41f2afc08bae49191c13500b02fa
CRs-Fixed: 3441916
Obsolete TWT functions are still called in driver. As part of
removal, Remove these functions and use component function.
Change-Id: I9f8b4186753ec9d446399be9e1cfc03a63a17391
CRs-Fixed: 3294868
Disconnection is logged even if keepalive indication is
sent to host after firmware sending final beacon miss
event.
Add two new roam failure reason code to indicate roam
failure and send final beacon miss.
ROAM_FAIL_REASON_NO_AP_FOUND_AND_FINAL_BMISS_SENT: Indicate
roam failure when no ap is found and final beacon miss
is sent.
ROAM_FAIL_REASON_NO_CAND_AP_FOUND_AND_FINAL_BMISS_SENT:
Indicate roam failure when no candidate ap is found and
final beacon miss is sent.
Change-Id: I6d7a6034f8be5388dd35dd3c05fecfd40a8d888d
CRs-Fixed: 3437060
In CFG_SAP_PS_WITH_TWT and CFG_DISABLE_SAP_BCN_PROT,
passing value as string instead of numeric.
Causes wrong value while macro expansion.
Passing enum value of false in CFG_SAP_PS_WITH_TWT and
CFG_DISABLE_SAP_BCN_PROT.
Change-Id: Ib8b297ef69cebb71c1e6645f49a75e79393b8c94
CRs-Fixed: 3440741
Currently, policy_mgr_is_ll_sap_present api is used to check if
ll sap is present or not but different operations may be required
for HT and LT LL AP policy example for LT policy i.e gaming/loss
less audio MCC is acceptable but for HT MCC is strictly prohibited.
So, wrapper functions are added to check HT, LT and any AP policy.
Change-Id: I93dbcd65b1a102d0f879366db26f3d2cf01e030e
CRs-Fixed: 3435203
Currently the ini gStaKeepAliveMethod doesn't support
Unsolicited ARP response packets. So, add it.
Change-Id: I614e87e7f173ea5c25c34eaf56de0805d37b26a4
CRs-Fixed: 3433020
Function mlme_vdev_create_send() was removed by the following patch:
qcacld-3.0: Send vdev create to fw from object create notification
Change-Id Ibba02f6b5885d7b3a62529ef51768f520395513e
However the prototype was not removed, so remove it now.
Change-Id: I45e20bc4cb8fb00486208711765625792312ce8b
CRs-Fixed: 3430397
The mlme_sap_set_twt_command_in_progress() prototype was added as part
of the following patch:
qcacld-3.0: Add support for SAP TWT teardown
Change-Id I108ea425e69e07ee8a3657ca5afcb436420b2626
However, there isn't an actual implementation of this function, so
remove the unused prototype.
Change-Id: If30d4e53b69c7747d60974c06a91795caffd19c0
CRs-Fixed: 3430387
Currently, on obss color collision detection driver sends bss color
change IE in beacon and updates the color switch count in IE in
every beacon until color switch count reaches 0.
If the wlan driver enters suspend during this updation of bss color
change IE in beacon, the bss color change is not completed until wlan
resumes. This will lead to delay in bss color change after bss color
collision is detected.
To fix this issue, acquire wakelock once obss color collision is
detected and release it once obss color change is completed. This fix
is similar to how CSA is handled currently in driver.
Change-Id: I9c3e7cfe16da116905121b044054c0987afbca09
CRs-Fixed: 3405919
wlan_mlme_public_struct.h has some documentation that is not being
processed by kernel-doc since it isn't using the kernel-doc comment
indicator "/**". Fix those comments, and also fix the documentation
syntax errors now reported by kernel-doc.
Change-Id: I407b5abefe8313071e5e99d52d69f181880c431d
CRs-Fixed: 3424372
enum pkt_origin is unused, and is poorly defined so it should not be
used in the future, so remove it.
Change-Id: Ia51ffa4518b36ea50f9ed67007978e228b18c7fc
CRs-Fixed: 3424371
As part of new requirement of 'SAP PS with TWT enabled',
add ini 'g_sap_ps_with_twt_enable' support in host
to enabled/disabled SAP power save with TWT enable.
Change-Id: Iea76f9cdef6f0753a6dfcebedc2aeab17d121faf
CRs-Fixed: 3421610
Add bool flag to mlme_vdev_disconnect_peers legacy callback.
This flag will be used by WIN. MCC should ignore this flag.
Change-Id: I693d1aeda1109a987311c1b87346960bed52309f
CRs-Fixed: 3403218
Support mld self roam between DBS(2 GHz+5/6 GHz) and HBS(5 GHz+6 GHz).
Change high rssi config.
Change-Id: Icb65f26509848a09fe46bf01154a0f42efa073f2
CRs-Fixed: 3416549
Firmware sends beacon/probe rsp received to host as part of roam
sync(frame) indication. Frame received frequency is same as
re-association frequency in case of non-ML or single link ML
roaming.
But the ML probe response might come from non-assoc link in case
of multi link roaming. Probe response received frequency and
reassociation frequency are different in such cases. Some
IEs(e.g. HT_INFO) expect frame received frequency to match with
the frequency mentioned in the IE.
So, fetch the probe response received frequency from source
address of the frame and the ml_info of roam sync indication.
Change-Id: Ife96aa46de10d4cd6882e6d04479dfdd481582d4
CRs-Fixed: 3412842
If roaming is triggered by source CM_ROAMING_NUD_FAILURE,
then per the INI gEnableNUDTracking to check whether
disconnect current connection or not.
gEnableNUDTracking=2, keeping the connection
gEnableNUDTracking=3, disconnect the connection
Change-Id: I0f321dcf5f3fc1bf7d0c93fa0d70bf4770ccaf35
CRs-Fixed: 3412213
Handle mlme_vdev_reconfig_notify callback to get notification
after receive the first ML reconfig link removal IE.
Override the delete timer tbtt to 0 to fire the timer early
if timer is less than 1s. This is to avoid host delay of sending
to link inactive command to FW and FW receive deauth before host
inactive link command.
Change-Id: I7865b7942813fd7facf4daa8624c976166814311
CRs-Fixed: 3380147
Handle link removal for ML STA vdev:
Send force link command to target if MLO STA link number > 1.
Select other inactive link to active if possible.
Change-Id: I40567364ad240399caf6be6683b96d17f6a4aab0
CRs-Fixed: 3352849
Extend WMI_ROAM_STATS_EVENTID event information for
requirement of:
1.Roam trigger related information, include timestamp,
trigger reason, trigger condition, abort reason,
scan type, roam status and fail reason.
2.Roam scan related information, include scan channel
number, dwell type, max dwell time of each channel
and total scan time.
3.all types of roam related frame information, include
timestamp and successful or failed status for Preauth,
Reassoc, EAPOL-M1/M2/M3/M4.
Cache roam information in wlan driver, when qca vendor
cmd of QCA_NL80211_VENDOR_SUBCMD_ROAM_STATS get roam
information, driver send all the cached information to
user space.
change-Id: Ic5e1120b51c20c103100833b4296002c5939b021
CRs-Fixed: 3389269
Currently, if Channel change is required via DCS then ACS
is triggered to select the best available channel . In case of
XR SAP optimization, SAP can not come on 2 GHz and frequencies
that can be shared by current SAP frequency on same MAC are
removed from scan list. As result of which frequencies
5/6 GHz in case of DBS and 5 GHz low/5 GHz high + 6 GHz based
on which 5 GHz range is shared with 2 GHz will be disacrded from scan
list. In short Scan can not be triggered on freqeuncies of same MAC
on which SAP is up and can not come in MCC. So, if any other device
mode is up on 2 GHz on other MAC turning on SAP on other MAC can
cause MCC in case of SBS and DBS HW which is not preferred.
Fix is to start SAP on random 6 GHz channel when case CSA is required
due to DCS in case SAP can't come up on 2 GHz and scan can not be
triggered for same MAC on which SAP is enabled i.e ACS optimization
is enabled for XR SAP.
Change-Id: I0cb46a409e3ee04044f7a0b12addec464e87ef7d
CRs-Fixed: 3404097
Add support to configure EMLSR padding delay subfield.
Host should advertise this value in assoc request if
it's greater than the value configured by FW during boot.
Change-Id: Ia9b1e748745278ed502980697f4851f8044db658
CRs-Fixed: 3364158
