Obsolete TWT functions are still called in driver. As part of
removal, Remove these functions and use component function.
Change-Id: I9f8b4186753ec9d446399be9e1cfc03a63a17391
CRs-Fixed: 3294868
Disconnection is logged even if keepalive indication is
sent to host after firmware sending final beacon miss
event.
Add two new roam failure reason code to indicate roam
failure and send final beacon miss.
ROAM_FAIL_REASON_NO_AP_FOUND_AND_FINAL_BMISS_SENT: Indicate
roam failure when no ap is found and final beacon miss
is sent.
ROAM_FAIL_REASON_NO_CAND_AP_FOUND_AND_FINAL_BMISS_SENT:
Indicate roam failure when no candidate ap is found and
final beacon miss is sent.
Change-Id: I6d7a6034f8be5388dd35dd3c05fecfd40a8d888d
CRs-Fixed: 3437060
In CFG_SAP_PS_WITH_TWT and CFG_DISABLE_SAP_BCN_PROT,
passing value as string instead of numeric.
Causes wrong value while macro expansion.
Passing enum value of false in CFG_SAP_PS_WITH_TWT and
CFG_DISABLE_SAP_BCN_PROT.
Change-Id: Ib8b297ef69cebb71c1e6645f49a75e79393b8c94
CRs-Fixed: 3440741
Currently, policy_mgr_is_ll_sap_present api is used to check if
ll sap is present or not but different operations may be required
for HT and LT LL AP policy example for LT policy i.e gaming/loss
less audio MCC is acceptable but for HT MCC is strictly prohibited.
So, wrapper functions are added to check HT, LT and any AP policy.
Change-Id: I93dbcd65b1a102d0f879366db26f3d2cf01e030e
CRs-Fixed: 3435203
Currently the ini gStaKeepAliveMethod doesn't support
Unsolicited ARP response packets. So, add it.
Change-Id: I614e87e7f173ea5c25c34eaf56de0805d37b26a4
CRs-Fixed: 3433020
Function mlme_vdev_create_send() was removed by the following patch:
qcacld-3.0: Send vdev create to fw from object create notification
Change-Id Ibba02f6b5885d7b3a62529ef51768f520395513e
However the prototype was not removed, so remove it now.
Change-Id: I45e20bc4cb8fb00486208711765625792312ce8b
CRs-Fixed: 3430397
The mlme_sap_set_twt_command_in_progress() prototype was added as part
of the following patch:
qcacld-3.0: Add support for SAP TWT teardown
Change-Id I108ea425e69e07ee8a3657ca5afcb436420b2626
However, there isn't an actual implementation of this function, so
remove the unused prototype.
Change-Id: If30d4e53b69c7747d60974c06a91795caffd19c0
CRs-Fixed: 3430387
Currently, on obss color collision detection driver sends bss color
change IE in beacon and updates the color switch count in IE in
every beacon until color switch count reaches 0.
If the wlan driver enters suspend during this updation of bss color
change IE in beacon, the bss color change is not completed until wlan
resumes. This will lead to delay in bss color change after bss color
collision is detected.
To fix this issue, acquire wakelock once obss color collision is
detected and release it once obss color change is completed. This fix
is similar to how CSA is handled currently in driver.
Change-Id: I9c3e7cfe16da116905121b044054c0987afbca09
CRs-Fixed: 3405919
wlan_mlme_public_struct.h has some documentation that is not being
processed by kernel-doc since it isn't using the kernel-doc comment
indicator "/**". Fix those comments, and also fix the documentation
syntax errors now reported by kernel-doc.
Change-Id: I407b5abefe8313071e5e99d52d69f181880c431d
CRs-Fixed: 3424372
enum pkt_origin is unused, and is poorly defined so it should not be
used in the future, so remove it.
Change-Id: Ia51ffa4518b36ea50f9ed67007978e228b18c7fc
CRs-Fixed: 3424371
As part of new requirement of 'SAP PS with TWT enabled',
add ini 'g_sap_ps_with_twt_enable' support in host
to enabled/disabled SAP power save with TWT enable.
Change-Id: Iea76f9cdef6f0753a6dfcebedc2aeab17d121faf
CRs-Fixed: 3421610
Add bool flag to mlme_vdev_disconnect_peers legacy callback.
This flag will be used by WIN. MCC should ignore this flag.
Change-Id: I693d1aeda1109a987311c1b87346960bed52309f
CRs-Fixed: 3403218
Support mld self roam between DBS(2 GHz+5/6 GHz) and HBS(5 GHz+6 GHz).
Change high rssi config.
Change-Id: Icb65f26509848a09fe46bf01154a0f42efa073f2
CRs-Fixed: 3416549
Firmware sends beacon/probe rsp received to host as part of roam
sync(frame) indication. Frame received frequency is same as
re-association frequency in case of non-ML or single link ML
roaming.
But the ML probe response might come from non-assoc link in case
of multi link roaming. Probe response received frequency and
reassociation frequency are different in such cases. Some
IEs(e.g. HT_INFO) expect frame received frequency to match with
the frequency mentioned in the IE.
So, fetch the probe response received frequency from source
address of the frame and the ml_info of roam sync indication.
Change-Id: Ife96aa46de10d4cd6882e6d04479dfdd481582d4
CRs-Fixed: 3412842
If roaming is triggered by source CM_ROAMING_NUD_FAILURE,
then per the INI gEnableNUDTracking to check whether
disconnect current connection or not.
gEnableNUDTracking=2, keeping the connection
gEnableNUDTracking=3, disconnect the connection
Change-Id: I0f321dcf5f3fc1bf7d0c93fa0d70bf4770ccaf35
CRs-Fixed: 3412213
Handle mlme_vdev_reconfig_notify callback to get notification
after receive the first ML reconfig link removal IE.
Override the delete timer tbtt to 0 to fire the timer early
if timer is less than 1s. This is to avoid host delay of sending
to link inactive command to FW and FW receive deauth before host
inactive link command.
Change-Id: I7865b7942813fd7facf4daa8624c976166814311
CRs-Fixed: 3380147
Handle link removal for ML STA vdev:
Send force link command to target if MLO STA link number > 1.
Select other inactive link to active if possible.
Change-Id: I40567364ad240399caf6be6683b96d17f6a4aab0
CRs-Fixed: 3352849
Extend WMI_ROAM_STATS_EVENTID event information for
requirement of:
1.Roam trigger related information, include timestamp,
trigger reason, trigger condition, abort reason,
scan type, roam status and fail reason.
2.Roam scan related information, include scan channel
number, dwell type, max dwell time of each channel
and total scan time.
3.all types of roam related frame information, include
timestamp and successful or failed status for Preauth,
Reassoc, EAPOL-M1/M2/M3/M4.
Cache roam information in wlan driver, when qca vendor
cmd of QCA_NL80211_VENDOR_SUBCMD_ROAM_STATS get roam
information, driver send all the cached information to
user space.
change-Id: Ic5e1120b51c20c103100833b4296002c5939b021
CRs-Fixed: 3389269
Currently, if Channel change is required via DCS then ACS
is triggered to select the best available channel . In case of
XR SAP optimization, SAP can not come on 2 GHz and frequencies
that can be shared by current SAP frequency on same MAC are
removed from scan list. As result of which frequencies
5/6 GHz in case of DBS and 5 GHz low/5 GHz high + 6 GHz based
on which 5 GHz range is shared with 2 GHz will be disacrded from scan
list. In short Scan can not be triggered on freqeuncies of same MAC
on which SAP is up and can not come in MCC. So, if any other device
mode is up on 2 GHz on other MAC turning on SAP on other MAC can
cause MCC in case of SBS and DBS HW which is not preferred.
Fix is to start SAP on random 6 GHz channel when case CSA is required
due to DCS in case SAP can't come up on 2 GHz and scan can not be
triggered for same MAC on which SAP is enabled i.e ACS optimization
is enabled for XR SAP.
Change-Id: I0cb46a409e3ee04044f7a0b12addec464e87ef7d
CRs-Fixed: 3404097
Add support to configure EMLSR padding delay subfield.
Host should advertise this value in assoc request if
it's greater than the value configured by FW during boot.
Change-Id: Ia9b1e748745278ed502980697f4851f8044db658
CRs-Fixed: 3364158
Currently, if there is a legacy connection and a new STA
connection comes up with EMLSR capability, Host does not
advertise EML caps in assoc request. But there is no support
to enable EMLSR mode if the legacy connection goes away.
Thus, add support to handle this concurrency scenario as
follows
1) Host should advertise EML support capability in assoc
request.
2) After association is complete, force disable one of the
EMLSR links.
3) Once the legacy connection goes down, re-enable the
disabled link.
Change-Id: I5d9f37827e2a9f0571fa9733b4779668bd987f92
CRs-Fixed: 3363115
In the case of EHT, if the mode is MLO then set AMSDU/AMPDU
caps per vdev instead of setting it only on assoc vdev.
Change-Id: Iaf480ee6a42cea83e30f412f663f688c0330d246
CRs-Fixed: 3392015
For bw higher than 20 MHz ACS request, such as 160 MHz,
weight calculation will combine the neighbor channel's
weight which maybe Non PSC channel, the previous setting of
combined weight to channel of lowest weight of neighbor channel.
That maybe Non PSC channel, that causes the final ACS result
is Non PSC channel, which is unexpected for standalone SAP.
Fix by set combined weight to PSC channel, so that PSC
channel will have a valid weight in final sorting with 5 GHz
or 2 GHz list.
Change-Id: Ic37d005af524f5ff2c8cb2c86647f02ced7c32d7
CRs-Fixed: 3394384
Even primary interface is configured, if dual STA policy is
STA_POLICY_UNBIASED, MCC is disallowed for both roaming and connect.
Change-Id: I6e26fdcdc930eb116771abfe310811c6534be09f
CRs-Fixed: 3396425
Add ini groam_info_stats_num used to control wlan driver
cache roam statistics information number.
Change-Id: I203257af37dcac76c6822ddfcc2e9dc723078a25
CRs-Fixed: 3393712
Add APIs to set/clear link removal flag on vdev object.
If link is removed, drop the disassoc or deauth frame for
the vdev.
If disconnect start is indicated, stop the reconfig timer.
Clear the link removal flag on disconnect complete.
Change-Id: I729621aec36b82de6e88970675b020a2c5721e68
CRs-Fixed: 3352779
Currently if host enable AFC in WMI INIT CMD, target will trigger AFC
request if current country has AP SP reg rules. We have changed regdb
on specific SP to enable AFC test, to not affect other SP which shares
regdb and FW, introduce INI to control AFC enable/disable for
flexibility.
And because currently no country support AP SP reg rule per spec,
so disable AFC by default.
Change-Id: I0e5eb2dac0a8df01635437fe8353ca5431ae5d2a
CRs-Fixed: 3393896
Currently gStaKeepAliveMethod and station_keepalive_method are not
mapped properly due to an offset of one. Fix this by updating enum
definition.
Change-Id: I572ee472b0b45816bf26830060d2b0707c90f387
CRs-Fixed: 3385907
Some legacy STA doesn't recognize the EXT CAP IE with
length greater than 8bytes. Therefore, these STA cannot
associate with hotspot broadcasting newer capabilities
in the extended IE.
To fix this, add an ini which would override the beacon
protection config in host driver.
Based on this ini, the beacon protection would be disabled
only for non-6 GHz and non-11be SAP profiles, as beacon
protection is mandatory in 6 GHz and 11be cases.
Change-Id: I672b707f6955fa31938aebba5e25461dd40cee4e
CRs-Fixed: 3378974
Whenever driver add new feature, it increments the feature version
and send it to firmware.
Due to new 11KV feature update, increments the feature version.
Change-Id: Ia840faf85c06a4f33f68f59dadda400c8e91804c
CRs-Fixed: 3381243
Firmware sends the roam scan info tlv to driver during roaming.
Currently, in this tlv, firmware fills scan type as (0-3) and
driver log this as "PARTIAL", "FULL", "NO SCAN" and "Higher Band"
But with new requirement, idle roaming shall only roam to higher band
(2.4 GHz < 5 GHz < 6 GHz) than current band.
1. If current band is 2.4 GHz, it cannot roam to 2.4 GHz.
It can roam to 5 GHz and 6 GHz.
2. If current band is 5 GHz, it cannot roam to 2.4 GHz and 5 GHz.
It can roam to 6 GHz.
So, to add this requirement, firmware introduces new scan type 4 for
which driver need to log.
Change-Id: I80d1c47a434da5009aed4cab08c6eae91bda5b0e
CRs-Fixed: 3379468
Currently host drops an AP from scan list if host country is set to
US and AP country is non-US. This implementation violates our
standard regulatory scan policy.
To address this issue, introduce a new INI to differentiate
between our standard regulatory policy with others.
Change-Id: Ie6bd2d1925048aef427136b34d00d361955f40b2
CRs-Fixed: 3377242
If phy regulatory capability doesn't support high or low
frequency indicated by MACRO such as HIGH_5GHZ_FREQ,
LOW_5GHZ_FREQ, we should not hard code to the MACRO.
The change adds new mlme API wlan_mlme_get_phy_max_freq_range
to get phy regulatory ranges from target info.
Change-Id: I95f48296ca093c20b1391d7657204eecfb418908
CRs-Fixed: 3376402
Set to_fw bit in DP vdev for direct link use case
and also set it when the use case is unspecified as
well.
Change-Id: I7306e22e81303720830cfce4ce19b15d2080d93c
CRs-Fixed: 3369891
The wpa_supplicant disables the BTM cap in extcap IE whenever
the MBO AP is not PMF capable, or if the btm_disable conf is set.
In current host driver design, the BTM offload is disabled only for
the MBO+non-PMF case. Therefore, add change to disable the btm offload
config if the BTM CAP is not present in the (re)assoc request as this
is determined based on intersection of peer and self cap.
Change-Id: I2fdc1010bccf5ce23f4ab2177aed6c374f7a510f
CRs-Fixed: 3369096
Currently host sends many pdev/vdev set param
commands separately to firmware from hdd.
Combine multiple pdev/vdev set params and
send to WMI to reduce number of transactions.
Also replace target wmi pdev/vdev params with host wmi
pdev/vdev params to fix existing broken layering
violation.
Change-Id: Ib76f5bd5f582a2c67486f6773ff6fd486b3d84cf
CRs-Fixed: 3333732
Currently wlan_mlme_configure_chain_mask API sends many
pdev set param commands separately to firmware.
Combine all pdev set params of wlan_mlme_configure_chain_mask
send to WMI to reduce number of transactions.
Also replace target wmi pdev params with host wmi
pdev params to fix existing broken layering
violation.
Change-Id: If0b7bce9a7c87d0f07e7a9f1d2cd80139f027308
CRs-Fixed: 3151438
When update rate info to vdev mlme_priv, if in current assocrsp
there is no extend rate or mcs rate, need to clear such info.
otherwise such info is still last connection information.
the link rate will display wrongly, test step as:
1 connect with 11g AP
2 config AP to 11b, then connect manually
3 link speed will be wrong on sta side
if extend rate or mcs rate is not present, clear ext_opr_rate_set
and mcs_rate_set.
Change-Id: I8ff1b5804dbbe463d6949d0431079174446c64ad
CRs-Fixed: 3356077
If some 20M sub channels are disabled for puncture, bonded freq state will
become CHANNEL_STATE_DISABLE, while CHANNEL_STATE_DFS is expected if
DFS freq is included to pass CHAN_DFS_CFREQ2 to F/W by vdev start wmi cmd.
the check also happens in several other places.
To fix it, use API wlan_reg_get_5g_bonded_channel_state_for_pwrmode to
replace wlan_reg_get_5g_bonded_channel_state_for_freq and
wlan_reg_get_bonded_channel_state_for_freq.
set is_create_punc_bitmap of ch param as true, then bonded freq
state will become CHANNEL_STATE_DFS after
reg_update_5g_bonded_channel_state_punc_for_pwrmode called.
Change-Id: I3e5214e9e09ac2a959f6fa7d641173a80a3980a7
CRs-Fixed: 3360820
There are two different names with different range of
value for aliasing INI's.
So, it should pick the valid range of value wrt INI
name.
Change-Id: I58d4797a0fa598a1e44349c8954dac3378f1a751
CRs-Fixed: 3352412
When component dependent functions calling from higher
modules or any other components, it uses ucfg APIs pattern.
Calling ucfg dependent APIs is acceptable for higher modules
like HDD, OSIF but for another components like DP to avoid
using ucfg APIs here, implementing component APIs for existing
ucfg APIs to other components like MLME, TDLS, Pkt capture in
DP component module.
Change-Id: Ib8857eeca6a88810d7875312ff6dc14ffb60bc70
CRs-Fixed: 3351486
This is applicable only when the roaming happens from 2.4 GHz/5 GHz
to 6 GHz AP.
The value is used to check if the 6 GHz AP to which we are roaming
(from 2.4 GHz/ 5 GHz) is better than current AP in terms of RSSI.
This checking is disabled if the value is set to zero.
Change-Id: I77f1183e1fd704dfa153841e669a20c9e75d0fe7
CRs-Fixed: 3353346
Add WMI interface(WMI_VDEV_SET_TWT_EDCA_PARAMS_CMDID) to
configure EDCA/PIFS param for LL SAP.
This configuration depends on edca_param_type.
If edca_param_type is 0 then host will configure EDCA param and
send it to firmware via WMI interface.
If edca_param_type is 1 then host will configure PIFS param and
send it to firmware via WMI interface.
Change-Id: I09f49474c0a698257d06aa4f1a17b56aae735fa5
CRs-Fixed: 3349447
