Add support to trap protocol tagged packets for the unique
metadata to send it as trigger to standby application
Change-Id: I76644477d1df2a0851472283623c1dc3dbe19b8b
CRs-Fixed: 3608436
Limit non-SRG PD threshold for upto minimum of MAX allowed limit
and AP advertised value and check AP nonSRG PD threshold
with correct signedness.
Change for debug print to display param value in hex.
Change-Id: I630aa894c856226a886161ced648073782f379bc
CRs-Fixed: 3598056
Add mlo teardown support for standby active mode in
mlo setup sequences and wmi
Change-Id: Iaa727527c53ff0ad6c7682e039ef23fa537e1ae0
CRs-Fixed: 3613367
Currently, STA cannot perform SR when SAP does not include SR
IE in Beacon/Probe response/Assoc response.
This change is done to configure default non-SRG OBSS PD
parameters in FW in this case.
Change-Id: I8effbc31631267bd96a269e0bffff74139dafaf1
CRs-Fixed: 3607399
Add srng disable function for 5332. This is required for
umac reset feature. Also, Avoid srng disable for lmac
rings.
Change-Id: Ieccc86134ee4d1cc3cd8a31a62f8fdf3afd5faf9
CRs-Fixed: 3599325
Wait for firmware response only if the response
is pending after posting the txrx stats query to firmware.
Change-Id: Ib300f97bc2cc08a2947be9021ff3e399191d1c8e
CRs-Fixed: 3599915
When WLAN_FEATURE_11BE flag is disabled, if opclass is 137, the API
reg_get_subchannels_for_opclass chooses the nchans as 16.
But the maximum size of the subchannels buffer is 8.
This leads to an array out of bound access issue.
To fix this issue, modularize reg_get_subchannels_for_opclass by
adding a new subfunction reg_get_nsubchaneels_for_opclass to get the
nchans. The maximum nchans returned by reg_get_nsubchanels_for_opclass
is 8, if WLAN_FEATURE_11BE is disabled.
Change-Id: I50095768e4a232fa83f1bc69690f64a745eecb05
CRs-Fixed: 3607354
Currently logs are being flooded during ath procfs read/write
operations. This excessive logging is causing wlan panic.
Fix this by changing log level from hif_info to hif_debug.
Since these logs printed are not required in normal use case
scenario, will be helpful only during debug purpose changed
log level to hif_debug.
Change-Id: If8ad1a8bf5c427e483c675192dcbd9ce42854ece
CRs-Fixed: 3615763
Currently SET_DISABLE_CHANNEL_LIST command is used to disable
legacy channels only.
Update this command to accept frequency for all the bands along with
the channel numbers from legacy (2.4 GHz/5 GHz) and update the
channel state in secondary channel list also.
Change-Id: Iecc9f73dca65900d82a2f2a044cb854cea58c638
CRs-Fixed: 3601253
Add definitions for sub-fields in Extended MLD Capabilities And Operations
of Multi-Link IE
Initialize AAL params in Extended MLD CAP and OP subfield of Basic ML IE
Change-Id: I84dfd7e4682d1ed040c1158e09888ad193aabca2
CRs-Fixed: 3590364
Currently the user configured MFP state that comes from the
userspace in connect request is not handled or processed.
Instead the RSN caps from assoc IE of connect request is inter-
sected with AP RSN caps and sent to Firmware using RSO command.
This RSN caps is used in FW in selecting a roam candidate, which
was causing the cross AKM (eg:SAE -> PSK) roam fail.
Hence, use the user configured MFP value in sending the RSN caps
to Firmware.
CRs-Fixed: 3606069
Change-Id: I3facfcf3616667b4749109d26d924c3fb1537494
Currently, in some API such as
"wlan_cfg80211_tdls_add_peer_mlo", when driver gets vdev, it is
MLO vdev, so it uses WLAN_MLO_MGR_ID ID, but when it tries to put
the vdev, since disconnection happens and mlo flag is cleared,
so it uses WLAN_OSIF_TDLS_ID ID which is non-ML vdev.
This causes release of vdev reference from different id for which
it never takes reference and result in crash.
To fix this, use same debug id throughout function. For that,
generalize the get_ml_vdev API by passing the debug id as
argument to the function.
Change-Id: I5800d207fdd17692297e71a0a9cdbcb86a4c5650
CRs-Fixed: 3608817
Reconfigure the link information structure for the partner
links and assoc link when a channel switch event is received.
Change-Id: I022bb6c6e2bcf43a1efaa6234e52648142b9fde2
CRs-Fixed: 3599451
Implement handling of mlo sta standby csa beacon
and initiate the transmission of a link bss request
command tlv to the firmware for standby link.
Change-Id: Ibdf903c69757b47f301ab9fa7c563407915532d6
CRs-Fixed: 3605764
Currently buflen is not updated for int type, causing some
ini items can't be printed via sysfs command.
Change-Id: I86a991252e9fa4031959a51d6827976b6ac89c04
CRs-Fixed: 3612278
Add nl80211 vendor event index
QCA_NL80211_VENDOR_SUBCMD_TX_LATENCY_INDEX, which is used to report
per-link transmit latency statistics.
Change-Id: I62bb668ebf6b3d10c0100448eb41bde29540890d
CRs-Fixed: 3596760
To enable support for nested array policy, define macro
VENDOR_NLA_POLICY_NESTED_ARRAY to take care of the version
compatibility.
Change-Id: I2d9e3079c0a6b34c61767ec50b0c404beb3240df
CRs-Fixed: 3596074
add new ini to configure skb size and change it in each place its used
correspondingly
Change-Id: Id00c6351bf6bc1b9df5e19064b2057dadd315e9b
CRs-Fixed: 3584462
Host needs to check new scan is enabled on device before
sending scan request.
Changes are as follows:
-Add new scan bit to scan obj.
-Fetch new scan service bit from FW.
-Update new scan in scan obj based on service bit from FW.
Change-Id: I19d874e859208dcdb2476e0fd2fbd61fcc77e565
CRs-Fixed: 3509136
Currently from dp_set_peer_param while calling dp_set_peer_freq
there is direct return which can result in peer refleak. as there
is reference taken in dp_set_peer_param.
To fix the issue instead of direct return break and release reference.
Change-Id: Ic3cfe993de64566afc13157810b80d3b3b28d244
CRs-Fixed: 3608000
Add a vendor attribute for an EHT DUT to configure the type of TID-To-Link
Mapping Negotiation Support for testing purposes.
Change-Id: I9e39fa1acfa07bf8e2514172adeed7a7d01f8abc
CRs-Fixed: 3608356
Change is made to add debug prints for VDEV start
and peer assoc commands sent to FW.
This change is made to help with debugging logs.
CRs-Fixed: 3611450
Change-Id: I40a0991330edd4ba71b7b71f2f7cf36364f4f365
tcp_seq_num and tcp_ack_num in qdf_nbuf_cb is not used
for Beryllium, repurpose them to store RX MPDU sequence
number. get RX mpdu sequence number from DP and store
it in qdf_nbuf_cb for logging later.
Change-Id: I3c21b383d827f12a1e1ec6202a5fc17804dddc1b
CRs-Fixed: 3610468
FW diag drain may got delayed and host may not clear
all the logs in one set. Change is aimed to give more
rounds to try to complete the pending logs before suspend.
Change-Id: I06433a464d96c3c9d96207f6da7a8ea513fcdc9e
CRs-Fixed: 3602039
Add a vendor attribute for EHT testbed STA to configure MLD ID in the ML
Probe Request frame transmitted as part of host initiated scan request.
Change-Id: I759d147238f176a8aa1db62381528f81a92ba459
CRs-Fixed: 3605356
Define a new QCA vendor test config attribute to configure powersave
on MLO links.
This attribute is used for testing purposes.
CRs-Fixed: 3605466
Change-Id: I67daaa5c774aea20f139a60f04758babbfe32319
TSF auto report is a stand alone feature, which can
be used to sync TQM clock and TSF clock, more than
one features depend on it.
Introduce a new build flag WLAN_FEATURE_TSF_AUTO_REPORT
to decouple it from uplink delay feature.
Change-Id: I5c62bee08d44234dc4936b3c63f3060edec30df8
CRs-Fixed: 3560244
Issue:
TX Monitor feature is broken recently in mainline (12.4)
for both QCA5332 and QCN6432.
RCA:
As part of tx monitor processing, it is needed to iterate
through the status buffer queue to populate TX PPDU info.
Every TLV present in the status buffer is parsed one by
one. Moving from one to next TLV is done based on:
tlv + tlv length + tlv header size
And the TLV tag gets computed from the initial 4 Bytes of
the TLV; TLV tag is generally used for further TLV parsing
methodology at HOST.
In case of QCA5332 and QCN6432, the tlv header size should
be 8 Bytes, whereas it is 4 Bytes now. Hence, right after the
first TLV is parsed, we see the TLV tag being computed as 0
for the second TLV and since there is a miscalculation of
4 Bytes in every TLV parsing, all other TLV parsings are
improper. This is the reason why the TX DATA TLV is getting
invoked before TX MPDU START; which results into system crash.
Fix:
Update the TLV header size to 8 bytes
Change-Id: Ib2857ae55e309a78ed6ee9bdbe695ae6daa71a08
CRs-Fixed: 3588743
Currently, max retail for connection is set to 1
it means only 2 trials are allowed, in case of 2
link MLO AP logic works fine but for n link only
first 2 combinations will be tried and SLO will
not be tried as no of retries will exceed than max
trials.
Fix is to update max retries to num_of_mlo_link - 1,
so that all combination tll SLO can be tried.
Change-Id: Id3e1da733d77eae79f2389b98ee9a664e44e6a2c
CRs-Fixed: 3607628
In case when DUT Roamed to single link MLO, Driver triggers MLO
roam internal disconnection wlan_cm_disconnect() with reason
"REASON_FW_TRIGGERED_ROAM_FAILURE" and source
CM_MLO_ROAM_INTERNAL_DISCONNECT on second link
for internal cleanup without informing the FW.
In this case, If Host issue RSO stop command to FW, RCL get
clean up in FW.
Fix is to avoid issuing RSO stop in cm_disconnect_active() if
source = CM_MLO_ROAM_INTERNAL_DISCONNECT and roam reason =
REASON_FW_TRIGGERED_ROAM_FAILURE.
Change-Id: I13ae95114f2a3134b39b3db7fefc6a24c408c484
CRs-Fixed: 3577024
If the function neither static nor declared before, it reports
build error "no previous prototype for"。
Define the function as static if it is not declared before.
Change-Id: I12294af372ff9586c99b726bcf755a4fa3e7ba28
CRs-Fixed: 3606048
In mlo_is_sta_csa_synced the mlo dev context lock is released
twice resulting in assert.
Release the mlo mutex once to avoid the assert
CRs-Fixed: 3598455
Change-Id: I1ceb797ddcaa8c57b8e7218c5b6aebf8d0136ab5
This change is to use ml dev context to fetch
link info, As ml dev context is available in both
vdev and psoc context. It's valid for both standby
and active links.
Change-Id: Ib705bd5a5a1144f980295331f5f26ba667906cf1
CRs-Fixed: 3568944
As cookie format is different between LI and BE have
different global descriptor pool for Lithium and
Beryllium
Change-Id: Idd222f4009c017a1bc4bc4b14043b36d927a9e27
CRs-Fixed: 3608792
