Android Packet Filter 3.0 requires the framework to be able to
read and write into the APF work memory in the Firmware. It
also requires to be able to enable or disable the interpreter.
New WMI commands are defined for read/write/enable/disable
operations.
Complete the implementation of these new commands.
Change-Id: I852d61eb213d9ae530e8a71069144ef35816f5b8
CRs-Fixed: 2184971
In implementation of Android Packet Filter, functions, variables,
definitions are named after BPF, which stands for Berkely Packet
Filter. The term was more appropriate for Link Layer packet
filters implemented in the Linux kernel, known as Linux Socket
Filters.
The term BPF is obsolete now, so rename it with the
appropriate acronym, APF.
Change-Id: I606afc747cddedb524a41cd8e5998400f04e69f6
CRs-Fixed: 2191531
Add support for ndp schedule update event and provide channel information
in ndp confirm event.
Change-Id: Ic2c073dd4f220627cc2bd1a2d52d858136b6b450
CRs-Fixed: 2180310
Send average radar parameters to FW.
Extract host dfs spoof check status from FW.
Change-Id: I70c4e5aad0fe1eda55da37abd20cc6d70728edba
CRs-Fixed: 2211883
Address the following issues in the wmi folder:
CHECK: 'addres' may be misspelled - perhaps 'address'?
CHECK: 'COMAND' may be misspelled - perhaps 'COMMAND'?
CHECK: 'defintion' may be misspelled - perhaps 'definition'?
CHECK: 'happend' may be misspelled - perhaps 'happened'?
CHECK: 'managment' may be misspelled - perhaps 'management'?
CHECK: 'messsage' may be misspelled - perhaps 'message'?
CHECK: 'overriden' may be misspelled - perhaps 'overridden'?
CHECK: 'poiter' may be misspelled - perhaps 'pointer'?
CHECK: 'refering' may be misspelled - perhaps 'referring'?
CHECK: 'refrence' may be misspelled - perhaps 'reference'?
CHECK: 'shrinked' may be misspelled - perhaps 'shrunk'?
CHECK: 'succesfully' may be misspelled - perhaps 'successfully'?
CHECK: 'succesful' may be misspelled - perhaps 'successful'?
Change-Id: Ie97e4d83cc88a2610524b38adc3474cdd31170d9
CRs-Fixed: 2241590
Add changes to support get congestion stats(arp stats) from
within cp_stats component.
Change-Id: Ic3b2f020c0169c9113c1b40738f782cbb3b8f6c5
CRs-Fixed: 2222781
Remove duplicate structs wmi_dual_mac_config and sir_dual_mac_config
and use policy_mgr_dual_mac_config.
Change-Id: I6da6539f519ec46ee274ba3f3ae042e5fd9c25d2
CRs-Fixed: 2191031
Add get channel width from phy mode API which will be used by
ndp schedule update event.
Change-Id: I13d00c0b818eb0da434c8a5372b2ab7b6693f22a
CRs-Fixed: 2216801
Fix memory allocation during NDP firmware events by allocating
memory before wmi_extract APIs are called.
Change-Id: I3af2f49895a79a45b3add246eeb9025b1df92faa
CRs-Fixed: 2183493
There are instances of use of older A_UINT/A_INT.
Replace all such instances with the qdf u_int*_t/int*_t.
Change-Id: I7ce29b03f29a0d1a0cf87cfd3c846f4694da4c2a
CR's-Fixed: 2210869
IPA module has been moved to CLD component under the converged
driver model. Point the wmi API's and structures to the newly
defined files.
Change-Id: I96205f7cc18dbea1c05a5f6314490ea6b3dd75fd
CRs-Fixed: 2180176
Add function for extract_nfcal_power_ev_param and
register wmi_pdev_nfcal_power_all_channels_event_id event
to support noise floor in HK.
Change-Id: I6eef823b507be94c65df026664244eec7fc07e24
CRs-Fixed: 2157972
qcacld-2.0 to qcacmn propagation
Adds qdf time api to get time of the day in millisec
Also send host timestamp to firmware, so that firmware can print the
logs timestamp in sync with host via the wmi interface,with
api wmi_send_time_stamp_sync_cmd_tlv()
Change-Id: Id6acfc5227fdca2fbf8d266998fdfc4046adc5f4
CRs-Fixed: 2193978
Change WMI initialization sequence to support WMI modularization.
TLV and Non-TLV modules calls WMI module registration based on target type.
WMI attach will call respective attach routines based on registration.
Change-Id: Id56446f491d129758537913d2d5d6633f8dec918
CRs-Fixed: 2179854
Remove dependency on WMA layer for green AP component by registering
green AP events through target_if layer.
Change-Id: I8fe9079c6ba6b23cd5f1d98a7d1b333fde31f19b
CRs-Fixed: 2178143
Added a WMI command to add and del peer from the list
of non associated clients for which the RSSI stats
need to be populated
Also added event handler to extract the rssi stats
from the WMI event
Change-Id: I9880c74798c13a52e1498b81735ad78f86fa41b8
CRs-Fixed: 2148773
Recently change "qcacmn: Add SAR power limit configuration"
(Change-Id: I0a214a2af780e9dd8c381c4e9eaa7d8cab6ef853) added the
ability to dynamically configure Specific Absorption Rate (SAR) power
limits. Now add the ability to retrieve the current active power
limits.
Change-Id: I7a6071dee71300daa3a217780ff3523604a11795
CRs-Fixed: 2161451
Add new WMI EVENT, SW FILS Discovery Alert Event, to get
firmware trigger to transmit FILS Discovery Frames.
Add WMI command to send FD frame buffer to firwmare.
Add WMI command to set FD period interval in mili seconds.
Change-Id: I8cb6279ec4431b9236bd32c548228a0dc6598664
CRs-Fixed: 2118098
Add ini to configure BTM offload configuration
which is sent to firmware as part of RSO start
via wmi btm config cmd.
Change-Id: I69c792705b208014af8f1878f7645d957dde6c06
CRs-Fixed: 2105112
DISA feature has been moved to a CLD component under the converged
driver model. Point the wmi API's and structures to the newly defined
files. Define new API's to extract parameters from event buffer.
Change-Id: Ia47d3682217e7ce9c021bb2db8319483c881b3b2
CRs-Fixed: 2161963
Add Objmgr ID and related definitions to support the newly
defined DISA component in CLD.
Change-Id: Ibbe5db39c01dae94cad5af5f4dccd2611c5b06d4
CRs-Fixed: 2159599
Refactor NAN target_if to make it wmi-type agnostic. Specifically
do not access wmi structures in NAN target_if. All the access to
wmi structures should happen in tlv and non-tlv specific wmi files.
Change-Id: I944b678fc501723d7cd26c9b21c4cc6ddb7fda4e
CRs-Fixed: 2159876
Add host support to enable setting MSDUQ depth parameters per
TID per peer.
Parameters include MAC Address, TID number, update mask and
Q depth threshold value.
CRs-Fixed: 2162460
Change-Id: Ie947fd599278a04e13d6aa6c89f840187dbf17fa
Direct Buffer Receive provides the driver with a mechanism by which target
can transfer information directly into host memory via DMA.
Add support for the following service/events/commands -
1. WMI_SERVICE_SUPPORT_DMA
2. WMI_DMA_CAPABILITIES as part of WMI_SERVICE_READY_EXT_EVENTID
3. WMI_PDEV_DMA_RING_CFG_REQ_CMDID
4. WMI_PDEV_DMA_RING_BUF_RELEASE_EVENTID
5. WMI_DMA_BUF_RELEASE_ENTRY
Change-Id: I3949026b4542565c49bb538b9545ea607690c793
CRs-Fixed: 2158304
While sending probe response template down to firmware, driver
populates some items in data-structure which is not getting used.
Remove those unused items and send only what is needed.
CRs-Fixed: 2130437
Change-Id: I1878f523f0f88c354854dfdb75e60e66c4ecb0e8
WLAN Latency module (WLM) is added by fw to gain latency
because of schedule out of service like power saving,
scanning, roaming etc. per the level set by framework.
Change-Id: I6b8775e5f492b6f287d60d39610a544114185a23
CRs-Fixed: 2152290
Request and print WDS table from FW using WMI command and event.
WMI_PDEV_WDS_ENTRY_LIST_CMDID is used to request WDS table
entries and WMI_PDEV_WDS_ENTRY_LIST_EVENTID is used to process
received WDS entries.
Change-Id: I452c8067d191d09826a38b751bb66f1bde587d9b
CRs-Fixed: 2003377
Enable FEATURE_WLAN_DOWOW for pcie.
This is for backward compatible with rome fw.
Change-Id: I41b9628179e81da682e6c6a9100d08ba7268f1a0
CRs-Fixed: 2070433
Request and process Beacon frames from FW using WMI command and event.
WMI_HOST_REQUEST_BCN_STAT is for beacon stats request and event processing.
Change-Id: I99250384868d62089a0f7d2acf94dd6e29ef67b9
CRs-Fixed: 2139393
Beacon offload control WMI command is used to control beacon tx in
beacon offload enabled mode. Add WMI API to send this command to FW.
Change-Id: I8b340b69ff508aaf80b9a80de044b0189b947a66
CRs-Fixed: 2140255
