use dma_inv_range call instead of dma map and unmap
APIs during replenish and reap. This complete code is
under a compile time macro.
before change: 4160Mbps @ 96.5% (core 3)
after change: 4160Mbps @ 90.5% (core 3)
Change-Id: I61bca349a369ace06cd86f353880108cee013cb1
Spin_lock_bh is introduced in ipa wlan rx path by security fix
I0c0bc6e60efa193126ba1e3eca36c5e02f7f76a3,
wlan_ipa_w2i_cb->cdp_peer_state_get->dp_get_peer_state->
dp_peer_find_hash_find->qdf_spin_unlock_bh(&soc->peer_hash_lock),
which make rx pkt aggregation failed, for each rx pkt, once
put into backlog queue, net_rx soft irq is scheduled to handle it.
For each rx msdu, ipa rx work thread, net_rx soft irq and iperf/app
thread are scheduled, which make rx throughput failed to meet KPI.
To avoid spin_lock_bh, don't call cdp_peer_state_get for each rx pkt,
only call 1 time, and save peer auth state in IPA context, for following
pkts, just get peer auth state from IPA context without spin_lock_bh.
Change-Id: I36196bab4626194bda254219c4c44dc4f029cff0
CRs-Fixed: 3098860
Add Host enums for the following WMI pdev parameters related to
Beryllium Spatial Reuse.
- WMI_PDEV_PARAM_OBSS_MIN_DURATION_CHECK_FOR_SR
- WMI_PDEV_PARAM_TRUNCATE_SR
- WMI_PDEV_PARAM_CTRL_FRAME_OBSS_PD_THRESHOLD
CRs-Fixed: 3112080
Change-Id: I19accc6dc2a744599ccce6ebf683499d92881993
Currently, in the case of single pdev we return the PCI slot as 0.
But in case where the device is attached to PCI slot 1, API will
still return 0.
Make changes to always get PCI slot from PLD API instead of
returning PCI slot as 0 in case of single pdev.
Change-Id: I39b55eeb3ebfbd6c08d7cc15a1ac49932af78b51
CRs-Fixed: 3103192
Currently driver just cancels the scan request and does not free
scan request memory if netdev is NULL or get vdev ref fails,
which leads to memleak.
To address abobve issue, free the scan request if netdev is NULL
or if get vdev ref fails.
Change-Id: Id6605e76a8c0977df93428f2aeb73c0bdfb84685
CRs-Fixed: 3107784
Add additional attributes in QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_EXT
vendor sub command to avoid usage of unsafe frequencies on wifi
interfaces sent from userspace to the driver/firmware.
The driver/firmware shall use restrictions and power cap accordingly
to restrict the usage of these frequencies on operating interface(s).
Change-Id: Ib2234137e436f1ddfe1163aed6e1d4b291f19aa8
CRs-Fixed: 3098836
Currently, we are assigning 9 MSI Vector to DP.
But in some target available MSI Vector are less
because of which they are unable to assign 9 MSI
Vector to DP.
So, to fix the issue reduces MSI requirement for
DP from 9 to 7 and mux DP interrupts.
Change-Id: I48da2d0e8921db3298903a398f981e5b45a60987
CRs-Fixed: 3111170
In QCA6750 target hif sleep timer is not used but timer
delete is performed during deinit path.
Fix this so that hif sleep timer delete operation is not
performed in QCA6750 target.
Change-Id: I54790f3b20af4f4b265ab37b593d300032f00fa5
CRs-Fixed: 3108047
Add more stats to cdp_soc_stats interface structure to ship it to
userspace. Move soc, delay and jitter stats apis from dp_main.c to
dp_stats.c.
Change-Id: Idb7f8b706e8744350d7fb2e8802d9303b3f25b5c
CRs-Fixed: 3084586
In dp_mlo_get_soc_ref_by_chip_id API add null check
for ml_ctxt
Also correct intraBSS code for mlo disabled cases
Change-Id: I25eb07e9ccd714ba819730c765dc07b00dd15482
Trigger MLO teardown and wait for response before proceeding with soc
power down.
Change-Id: Ie1d00408862459b0e5240ef3151a0d969ab65e80
CRs-Fixed: 3102143
Add QCA_WLAN_VENDOR_ATTR_ACS_EHT_ENABLED flag attribute to conduct ACS
for EHT mode. The driver can consider EHT specific parameters such as
puncture pattern for ACS when this flag attribute is indicated by
userspace.
Change-Id: I9cb0b7a6bc830a5f4f01a7a7fa5212cc6b2c3a95
CRs-Fixed: 3108987
Add APIs to get txrx peer, tgt peer and primary link peer from peer
for both MLO enabled and disabled scenarios.
Change-Id: Ie48711972dd3eef35fdd7bf736e91bfce4cd41f3
CRs-Fixed: 3107160
Add support to set enhanced stats in pdev via cdp pdev set param
functionality.
Change-Id: I4c271dfc71511a0869a795c2adbb0e0eb55ba9d0
CRs-Fixed: 3108103
First host checks below two things in host scan request:
1. Userspace sets NL80211_SCAN_FLAG_COLOCATED_6GHZ flag
in host scan request.
2. At least one 6G channel is present in the host scan req.
If any of the above conditions satisfies, Host fills all
remaining (other than channel(s) present in host scan req)
valid 6 GHz channel(s) to scan requests and set the flag
FLAG_SCAN_ONLY_IF_RNR_FOUND for each remaining channel(s).
Host sends this updated channel list via WMI command
WMI_START_SCAN_CMDID_param_tlvs->channel_list for host scan
to firmware.
With this change, driver allows Firmware to scan 6G channels
based on RNR IEs only (for colocated APs reported by 2.4/5
GHz APs).
Change-Id: I2d9d2aac58bbc521b2476756d5919647bdc265cc
CRs-Fixed: 3103873
PHY related info. has been updated when processing PPDU status
in Monitor mode, but it's got overwritten uncorrectly when
processing RX_MSDU_START TLV in VHT mode. Change aims bypassing
the wrong update, when it's working in VHT mode.
Change-Id: I2c78db66bc7222e3eebf052fb6e57d6f9d859286
CRs-Fixed: 3108059
Currently the MLO_STA_LINK flag is not getting cleared. If a connect is
received on a different link as assoc link, because of STA_LINK flag,
none of the link will be considered as assoc link.
Add fix to clear MLO_STA_LINK flag when clearing MLO capability.
And also clear the MLO_STA_LINK flag on handling pending connect req.
Change-Id: Iaf7c557786bac7754c4b33c80f0f92cb007870ae
The following issues are fixed with this change-
1. Sojourn stats were printing incorrect values
2. RSSI values were junk numbers
Change-Id: Ibed73cf370a309bf9db5baad37a0e8261c58463b
In function qdf_fill_wlan_connectivity_log, the unsupported EAPOL
packet types are not dropped.This results in setting the
log_subtype to invalid value zero and the log buffer being forwarded
to wlan_connectivity_log_enqueue. The fix is to drop the unsupported
packets by returning from the function.
The local variable log_buf,of type struct wlan_log_record, is not
null initialized.This could cause some of the member elements to have
unexpected values.This fix is to null initialize the log_buf structure.
Update Qualcomm copyright to include year 2022
Change-Id: I651329fead1e42282d7811c32eea2359ba970527
CRs-Fixed: 3079947
Currently there is no recovery reason for stats request failure.
With this change add QDF_STATS_REQ_TIMEDOUT for stats request
failure.
Change-Id: Ie9ae8259fc20b4d8829b760e818b6a1f9194a9d0
CRs-Fixed: 3106570
Add support for a new QCA attribute to pass the puncturing
bitmap as part of the DO_ACS vendor command.
CRs-Fixed: 3102366
Change-Id: Ic0e54d82e48bae695baf3be4fd388ec15f81a416
