When TX completion entires are pending over 60 seconds,
Perform force free for these entries that belong to invalid
vdev. This could allow system to continue to go to suspend.
Change-Id: I34a39b8c7a9385fea0bed087e0644564f426bf90
CRs-Fixed: 3252807
Added fix for two leak,
a) During wifi unload, buffer used in init need to be free during deinit.
b) Before buffer free, unmap is required for the buffer mapped to DMA.
Change-Id: I4e5a63b0c2aabb69367365e74961a63194144057
CRs-Fixed: 3157424
use msdu_count and index to occupy buffer headroom within mpdu.
new mechanism to debug buffer while using pf tags enabled
Change-Id: I1b7d8a1d7ec93f51869119294d2f0b14e3909fe9
CRs-Fixed: 3217284
Call UMAC reset initialization API from soc_attach_target().
FW exposes a service bit for this feature, use that to conditionally
enable this feature. Also, add default log levels for this feature.
CRs-Fixed: 3253464
Change-Id: Ia7c9cf07a7ab7b000ebe452ab074a82173b70129
DP uses multi page allocation for tx/rx descriptor.
ID and offset mask of decriptor is based on 4096 which
couples with Kernel's MMU PAGE_SIZE. This cause trouble
when deploy driver on none-4K page size kernel.
Set qdf_dp_blockmem_size to 4096 so that DP won't
depend on kernel page size.
Change-Id: I17f5c10b394e8709e6b4b153f3dd094cf792787f
CRs-Fixed: 3235246
dp_mon_free_parent_nbuf() function is required to be
used outside of file dp_rx_mon_2.0.c hence make it
public.
Change-Id: I2c300362fee3610fce0109704ea1849333bf9715
CRs-Fixed: 3250904
Add support to print AST entries of MLO peer.
MLO AST table is global across SOC and hence any print AST request
will print the MLO AST table
Change-Id: I07554606617f43a8806e1c7243ca69a0c8ce335e
CRs-Fixed: 3246520
Add changes to support flushing of MLO peers only.
This is required to support the mode-1 behavior of target
recovery feature, where we delete MLO peers and retain
legacy peers across SOCs which are not crashed.
CRs-Fixed: 3243549
Change-Id: I5ae326bfffd1267768c83fd7f60fa1343ef305fe
Currently, if mld and link peer has the same mac
address, the peer cannot distinguished with
just the mac address as the search argument.
Hence to support same mld/link peer mac address,
cdp_peer APIs that uses both link and mld peers,
are also given peer_type info. This helps
to perform the operations on the correct peer.
Change-Id: If646755facc8f9a4d9fed2f31c5cc6618fa9a952
CRs-Fixed: 3043428
The list of SW descriptors that we create from the HW descriptors
in DP Tx completion path is corrupted in intra-bss path. This is causing a
crash when corrupted descriptor is accessed.
The cause of corruption seems to be due to incorrect rings being accessed.
Use cpu index to fetch tx. ring IDs.
Change-Id: I5342b7c4e24df983900fde79f36df8395bf628cb
CRs-Fixed: 3223420
For QCN9224 splitphy mode do not rely on rx_desc_pool_id
to get to the VDEV as desc pool is common across PDEVs
Change-Id: I2552878bd56696a8df463b35e2b273ed4e591050
CRs-Fixed: 3220690
Support for addition of AST entries for MLO peer event.
Deletion is handled implicitly
Change-Id: Id1caa85370fac847d18dc3bcbecad726bf927d0f
CRs-Fixed: 3251691
Add support and handle tx monitor full buffer payload and
other minior fix include change of name for uniformity.
Change-Id: If401ecd5e1c6263584fa7013df672459c883ca8b
CRs-Fixed: 3215244
Create a new API to update wdi hdr type for IPA and Fix
the return type for cdp call.
CRs-Fixed: 3246990
Change-Id: Ic8adb1f46bfeda6598a01ffdda27339cfa04ee9d
Monitor vdev attach is called both AP and Monitor VAPs
AP vap creation are started prior to monitor install.
So, add the check to determine whether valid monitor vdev or ap vdev.
Change-Id: If7a83a6826499574f88a4a1220ba3642c028f66a
CRs-Fixed: 3240300
Change macro IPA_WDI3_RX_TWO_PIPES to IPA_WDI3_VLAN_SUPPORT to represent
the feature supported under this macro
Change-Id: Ie1e387d641052cd5690c63f0c1216f4852544605
CRs-Fixed: 3250264
Currently while sending nbuf to rx fate logs
we are not removing rx tlv before sending nbuf
to logger which is causing issue of incorrect
packet type issue.
To Fix issue make changes to make sure that
rx tlv is removed and nbuf length is set
Change-Id: Ib56c8e009398b3410c43be910feb4048bfb06b54
CRs-Fixed: 3241828
Add change to support deletion/cleanup of AST entries on host
for BE platforms(Waikiki) based on peer map and unmap event received
from FW.
Change-Id: I494f7beb572e81cf68cc1cf90864eea0d8125369
CRs-Fixed: 3237943
Add change to support addition of AST entries on host
for BE platforms(Waikiki) based on peer map and unmap event received
from FW.
Change-Id: Ib9a76fd15d18e322b561ce9361d62643289817c4
CRs-Fixed: 3237940
Event based mechanism to reduce delay by removing sleep
while getting response from firmware
Change-Id: I9d553764127efaf06794f41c81cf646cf9dc695e
CRs-Fixed: 3233643
Duplicate X times of RX packet before delivering to stack, if OTA
RX T-put is 100 Mbps and try to simulate 200 Mbps RX T-put,
duplicate extra 1 time RX packets, this is aimed to test
driver/stack RX capability.
Change-Id: Iaf4db05d0ec0e0cda5fac19fa63b9d3133270847
CRs-Fixed: 3132743
Only one rx desc pool is used for MCL for Rx data. Pool_id from
the SW cookie is used to get the rx desc from the corresponding
rx desc pool. Checking pool_id against MAX_RXDESC_POOLS may lead
to kernel NULL pointer dereference Since, pool_id other than 0
is not valid for MCL.
Fix this issue by checking pool_id against MAX_PDEV_CNT
to get the rx desc from rx desc pool.
Change-Id: Ib9b152ac2cfe2c16d388aca9e22440fbcdf7fe6c
CRs-Fixed: 3244453
UMAC reset prerequisite setup command contains the following information.
- Interrupt number to be used for raising the UMAC reset interrupt
- Address of the shared memory
This is an HTT command. Send this command as part of the UMAC reset
initialization sequence.
Change-Id: I7a08f48b420580b5e3dbb9b46f6605d986f8fd89
CRs-Fixed: 3244930
UMAC HW reset is expected to send the following Tx commands to the target.
- PRE_RESET_DONE
- POST_RESET_START_DONE
- POST_RESET_COMPLETE_DONE
Add the necessary logic for the same.
Change-Id: I2450ed9281691abcc064661d4481ae78f48a0f3d
CRs-Fixed: 3244895
UMAC HW reset is expected to receive the following 3 events from FW.
- DO_PRE_RESET
- DO_POST_RESET_START
- DO_POST_RESET_COMPLETE
Add necessary logic to handle these events.
Change-Id: I786ecf6ed2925fd7fcc0934fdce65c76784f4f67
CRs-Fixed: 3244865
In IPA offload, both tagged and untagged traffic cannot be handled with
a single rx pipe. Hence, add support for 2nd RX pipe for tagged and
untagged traffic respectively.
Change-Id: I77ff633327696f66df42fb592492321c1591646b
CRs-Fixed: 3226021
Currently in monitor mode for KIWI, interrupt for RXDMA2HOST is
enabled to process both monitor status srng and montior destination
srng, but low threshold interrupt for monitor status srng is also
enabled. so when available RX buffer in monitor status srng is less
then low threshold, it is possible that two kind of interrupt from
RXDMA2HOST ring and monitor status ring will call
dp_rx_mon_status_process_tlv() in different context and access to
mon_pdev->rx_status_q at the same time, this will lead to skb
double free issue.
solution:
(1) disable RXDMA2HOST srng interrupt in monitor mode.
(2) enable monitor status srng batch count interrupt for monitor
processing.
Change-Id: I1df8830cb7cc55468e5df5e49045c3d96f7c29a8
CRs-Fixed: 3245393
Add change to support learning of AST entries on host
for BE platforms(Waikiki) based on peer map and unmap event received
from FW.
Change-Id: I58aa6a18ca69d5ffc6fbcf9c18723adb39647950
CRs-Fixed: 3237934
