Add counters in case where we identify
HW issue where sa_valid and da_valid bit
are set and sa_idx and da_idx are invalid
Change-Id: I690b626dd3c2b7f20b35982514b0f27576221250
CRs-fixed: 2340521
When client roams from repeater to AP we need to delete the
existing WDS while creating a peer. In this case use AST search
by pdev_id to find the AST entry when ast_override support is
enabled for soc
Change-Id: I1c7bfb8173416b6e155d3c58e94c395028c9b16d
CRs-fixed: 2399868
Check if peer is valid before access during flush.
Check waitlist during peer cleanup even if REO queue was
not allocated, since these are independent.
Add a timeout to avoid calling flush function too frequently.
Change-Id: Ib8da2014f81a48ccc3ca6a330209a942ac0998a2
1. Enable CE5 and allow it to service
pktlog messages from the firmware.
2. Register full pktlog callback handlers
for handling sw_events and full tx pktlog.
Change-Id: Ifb70ac0993f2402201f88758845f730cf677b1a0
CRs-Fixed: 2388906
The CONVERGED_TDLS_ENABLE feature flag was originally introduced when
the TDLS feature was being componentized so that one could select
either the legacy implementation or the componentized implementation.
That componentization activity has concluded and the legacy
implementation no longer exists. To align with the current usage
remove all legacy TDLS code and switch to using the FEATURE_WLAN_TDLS
feature flag since that more accurately describes the code being
protected.
Change-Id: Ieef785844bd25b06604167eae2f52e39717f502f
CRs-Fixed: 2395694
Use __dp_peer_find_by_id, as this will return the peer, even if
delete is in progress. This is needed, if the FW has crashed and
there is no response expected
Change-Id: I0f77184860622b06f793fcfd321547ea41e958cd
CRs-Fixed: 2392817
Add return path for fc_peer_stats for peer mac address if the peer
is connected to another pdev.
The DP peers are maintained at the SOC as such there is no check
to make sure that the peer is for a particular pdev.
This issue is especially seen when an end user invokes
fc_peer_stats in wifi0 for a peer that is connected to wifi1. In
such a case, we should be returning an error since the peer is not
connected to the pdev that the user application is directed to.
Change-Id: Ie1142c508605bfcf2fd49adc863879eee98fffe6
CRs-Fixed: 2397052
Remove dedicated CDP API for mcastenhance 6 AST lookup and replace
the calls with generic APIs
Change-Id: Ic2c5613be57d7eaffc233ee601f136694f81f848
CRs-Fixed: 2369606
check for max_ast entries supported by FW and add the
entry on host accordingly.
Change-Id: Ief70ba631bb41d50c79d3673e3eea0c45b0c1e19
CRs-Fixed: 2355947
Currently there is not STA inactive time support for lithium.
Read inactive_time from htt_peer_stats_cmn_tlv by sending
HTT_DBG_EXT_STATS_PEER_INFO to firmware.
After sending command, wait on completion variable till
firmware to response, trigger completion upon firmware response.
CRs-Fixed: 2319219
Change-Id: I93e6343641ae5c72610a57dd6ba551cca0b010c1
Protect peer delete in progress under lock to avoid
addition of AST entry after peer tear down
Change-Id: I21ec1dde67339406ad1b5ac99d37b6ce8d021fde
CRs-fixed: 2384110
In certain scenarios where AP sends OFDMA TCP packet to
multiple STAs in HE80 mode in poor RSSI conditions, it has been
observed that host in STA gets in to null_q_descr handling case and
rxtlv doesn't carry correct sw_peer_id. Due to this,
driver can't find correct peer from table and ends up sending deauth
frame to handle invalid peer case. The TA is valid and host is able to
find the peer using the TA.
Apply workaround by detecting this special case and drop the frame.
CRs-Fixed: 2367420
Change-Id: I0cbdbb8e9976e739c959062261fc1c946e446d63
dp_bus_suspend and dp_bus_resume are currently defined for both WIN and
MCL, but only used by MCL. Move their definitions such that they are
under the same #define's as their usages.
Change-Id: Idd17fa0a521f7474d481fbaf5d2c7cfd4138c774
CRs-Fixed: 2387904
a. Acquire peer list lock
b. Acquire vdev list lock
y. Release vdev list lock
z. Release peer list lock
Change-Id: Ifc1e57fd1a243d909ca65421f269830d24d6b31b
CRs-Fixed: 2372947
Free the pending dp peers before cp peers in fw recovey case,
to make sure dp peers release all cp peer references they hold.
Change-Id: Ie6c7562e7214f40be895cf8a57a1aa6245d717cb
CRs-fixed: 2383984
WDS aging timer is dependent on a flag which is set in soc_cmn_setup,
but in current implementation wds_timer_attach is done from soc attach
and soc_cmn_setup is involed from pdev_attach. Fix this race condition
by moving wds_attach to soc_cmn_setup
Change-Id: Ia88201c627b434b85e56daadd0c7ab20e6ce0b3f
CRs-Fixed: 2373127
populate TX OFDMA and TX MU MIMO information from
user rate tlv and display the same in fc_peer_stats.
Change-Id: If1dab15bbdf391fba00a701abd6024c420d1d8f7
1. Account for total Tx completions received on wbm2sw release ring.
2. Avoid multiple updates to invalid peer counter on
wbm error path handling.
Change-Id: I904208e1bd83e98598870a1f05c4b17c3fb20e2d
CRs-Fixed: 2366790
Make sure the objmgr_peer is not deleted before
dp peer is deleted, which will avoid the access
of already freed objmgr_peer for connected sta peers.
Change-Id: Ib931dcd0c5650fea5284e9dd53dae9e41f662c56
CRs-Fixed: 2359645
hal_srng_cleanup was called from dp_srng_cleanup after the
hal_soc was freed.
Move the call to dp_srng_deinit where the memory is still
valid.
Change-Id: Ida25ee48e527b5139fc05cd85c5634e70965ccd0
CRs-Fixed: 2367332
once in a while the HW is sending a descriptor which
is already processed by host. This can be a potential HW
issue, as a WAR we are not processing such duplicate descriptors
instead increment a counter and continue with next descriptor.
Change-Id: I6c9bc6a9fb4705b42284171a32855411aa5dd73f
CRs-Fixed: 2338543
Change the CDP abstraction APIs for ast entry find, add and delete
to avoid external references for ast entry in upper layers
Process the HTT v2 peer map messages which will be enabled for
nexthop ast entries and use these messages instead of WMI event
for HKv1 WAR where we have to wait for delete confirmation from
target event which is processed in control path
Change-Id: Ifa91a259c0762344deb8ab89e868fc5554d75543
CRs-fixed: 2354951
For non-NSS platform, update no of rx packets being
sent from wifi driver to network stack in case of
vow traffic.
Change-Id: If16a5b9c37a16374d4217369b1f02360c62155a9
CRs-Fixed: 2371429
Add cdp api to check if tx desc pool available descriptor
threshold has reached.
Change-Id: Ie542d03dd865d32aa6e01da00328aa51728b4276
CRs-Fixed: 2369218
The last_ack_rssi value is made to get updated with the
correct value and the code fragment to reset it to 0 has
been removed.
Change-Id: I87f9ca788c92ae6ffc05b10faeb82e03024050ce
Current driver doesn't check for any TX pending flag before doing
bus suspend.
Add a logic which is similar to existing helium platform.
Change-Id: I49d078c3b86fc0d9659fbbc2f3c1a604a79a9dff
CRs-Fixed: 2360189
Stats are updated periodically and
are categorized to soc, pdev, and
vdev
While the stats are getting updated
and if pdev, or vdev gets detached
in the same time, the stats handlers
will deference a NULL pointer
Hence Add basic sanity checks to DP
layer for soc, pdev and vdev inside
stat handlers
Change-Id: Ic4919b9c205679e1d6e7c571c577339be65c1bad
Add support for GRO functionality for TCP packets.
- Pass GRO config to DP layer as a part of dp_update_config_parameters
- Add API to read the number of active RX contexts from DP layer
cdp_get_num_rx_contexts
- Fill GRO info into skb->cb from rx_tlv during dp_rx_process
CRs-Fixed: 2346995
Change-Id: I1c143d8ce2c7522ba2c76142fb6cc82193df5608
Current driver doesn't clean-up all the peers because the TARGET
state is not marked as reset and due to which nobody is there to
mimic fake peer unmap events to reduce the reference count.
Also, there is no peer delete API being called as well in case of SSR.
Identify the TARGET state in-case of SSR by calling HDD callback
and mimic the unmap events and call peer delete API as well.
CRs-Fixed: 2350285
Change-Id: I878b7a15701c01ac9ef80010086f7e868a631a74
In existing code, 132 bytes of OTA mgmt. and control payload is
provided to upper layers by subscribing to packet header TLV.
The requirement in M-copy mode though is to get complete payload for
mgmt. and ctrl. packets. Add change to configure monitor destination
ring and add mgmt. and ctrl. packet filter to receive full mgmt. and
ctrl. packets.
Change-Id: I0014837b51cac6f0143dcc5cb624ea2086cf4486
CRs-Fixed: 2256159
Add support for smart monitor feature on HKv2.
For HKv2, NAC filtering is done by HW and NAC is
programmed directly in the AST table. The NAC entries
in AST table have monitor direct bit set and this
is obtained by host via monitor status ring.
host subscribes for packet header in MD packets.
To these filtered packets radiotap header is added
and delivered to the stack.
Change-Id: I123f986531943e376ac5c492540e01f0b03348c4
Pass vdev mac-addr and vdev-mode, instead of vdev-id.
The vdev-id that was passed earlier, was used to get
the mac-addr and vdev-mode from the vdev structure.
But there are cases when this vdev structure may be
freed, when this API is called.
So pass the mac-addr and vdev-mode from the dp structures.
Change-Id: I2148e7ecef433f4363385eeaec2e18f3ec131ab8
CRs-Fixed: 2356315
Link descriptors should be returned to WBM release ring if
fragments are not reinjected due to defrag errors.
Change-Id: Ia37db9f195f6848092918cf7cc221dc50e827ac5
During vdev attachment in monitor mode, the ini_timer is not
initialzied which will cause FW assertion. Make sure int_timer
is initialized properly.
CRs-Fixed: 2359908
Change-Id: I48c97161345b17a0eb3e8a939499eabeae683bd2
This FR is to enhance existing pktlog debug tool
This feature will allow to capture pktlog for particular
peer mac address.
Change-Id: I3676095536185f25b0d498e03f70246260a324fd
Eanable monitor mode low water mark interrupt.The monitor
mode processing is stuck in the monitor mode buffer ring full
if monitor mode low water mark interrupt is not enabled.This
is because there is no packet come in when monitor buffer
ring is full and hence there is no ppdu end interrupt.The
monitor is not processing the monitor ring and buffer ring
full condition is not remoevd.
Change-Id: I28b3a4b408db62873c17512d20e63c9844e8d4ea
int_ctx variable is not defined but it is being used which creates
compilation error. Define this variable as part of the fix.
CRs-Fixed: 2359507
Change-Id: I17e57663eb8daa449616ee99d5eb9455e3b7cee2
MCL DP initialization path is running into issues due to change
I5732453f617bdc16995fda916b645c41845c3ecb. Fix the same.
Move flow control lock variables to re-use region. This is needed since
flow control deinit happens in dp_soc_detach, while in dp_soc_deinit, the
soc memory is being partially reset.
De-init HTT memory in dp_soc_deinit and free HTT handle
in dp_soc_detach. The existing code was not freeing HTT
packets for MCL case and freeing the HTT handle twice.
CRs-Fixed: 2359409
Change-Id: I52dcccc0444d4ce139a29ffcb884598bbacda88f
Avoid memory fragmentation that happens during
attach-detach flow.
- Reuse transmit allocated static pool memory across soc up/down.
These memories are allocated during soc attach.
- Reuse DP source ring memory, DP soc context, DP pdev context
across soc up/down.
- Reorganise structure members of DP soc and DP pdev so that
we can zero out structure members across soc up/down
- Add cdp soc init/deinit and cdp pdev init/deinit that
will be active across soc up/down
Change-Id: I5732453f617bdc16995fda916b645c41845c3ecb
