AP may send IEs in deauth/disassoc frames as part of disconnection.
Extract the same and forward to kernel through
cfg80211_disconnected().
Change-Id: I4ef339dcd1ecff64d6bed1de35621ecce5d8030a
CRs-Fixed: 2481912
disconnect_ies sent from userspace are cached in vdev mgr object.
Send the same in deauth/disassoc frames initiated from the driver.
Free the IEs once the frame is sent out successfully.
Change-Id: Ib223a9da7f5795bc10d717efe23c6106391070bb
CRs-Fixed: 2481909
Application sends disconnect IEs to driver through vendor command
SET_WIFI_CONFIGURATION by embeding in the attribute
QCA_WLAN_VENDOR_ATTR_DISCONNECT_IES. Extract the same and validate
to make sure it's not more than maximum IE length that can be
accomodated in deauth/disassoc frame. Cache the extracted IEs
in mlme vdev object.
Change-Id: I6c95aa1d4d8ef7d8ed3ad5be8832ef1f45c26a2f
CRs-Fixed: 2481908
Currently there is no ini support to configure frequencies
which needs to be avoided for the acs channel list which
may allow SAP to come up on a channel which is not preferred.
For Example there are many legacy clients which supports
2.4GHz but don't support channel 12 and 13 (or does not have
the capability to detect country change where channel 12 and
13 is valid).
In that case, if SAP comes up on channel 12/13, those legacy
clients won't be able to connect to AP.
Hence, Add a feature flag and ini to configure the frequency
list which can be avoided during acs.
Change-Id: Id106b38228f837ba056eb916004dc012e919ddd2
CRs-Fixed: 2472004
Add ini support for FIPS 4-way hanshake offload to firmware. FIPS
offload feature will add support to handle LFR 3.0 connection only
(auth/reassoc). If this ini is set then firmware will offload
4-way HS to supplicant. In the Roam sync indication firmware will
inform connected and not authenticated so that supplicant can take
care of 4-way HS.
Change-Id: I3da58910218ffc57094cac4c3cab4572631d9404
CRs-Fixed: 2459182
Add per module logging macros without function/line info
to avoid adding function/line info where it is not required.
Change-Id: I0bd9248122b4f49274ee05a225ce6f880fede0cb
CRs-Fixed: 2468414
In function mlme_init_vht_cap_cfg(), initialization of
CFG_VHT_SU_BEAMFORMEE_CAP is done using the cfg_default() api,
which always returns the default value irrespective of the
ini configured.
Use cfg_get() api to get the default value of ini items.
cfg_get() api use gTxBFEnable ini for SU beamforce caps
Change-Id: I17062548931b5032dfdd56652ddaef2b96c8864e
CRs-Fixed: 2462350
CFG_VALID_CHANNEL_LIST_STRING_LEN as array size passed to
qdf_uint8_array_parse, which is more big than array size. So pass the
actual size - CFG_VALID_CHANNEL_LIST_LEN to that function.
Change-Id: I7596c0887147523570450dbac4dba2d03e7fe8b6
CRs-Fixed: 2462613
Add support for roaming in case the driver
detects a nud failure. The STA then would roam
to another BSSID, else if the roaming gets failed
the STA would remain connected to the same BSSID
as connected before.
Change-Id: Idbc99b0ce2f9cacd97564dd8cf9892120958eda2
CRs-Fixed: 2461675
In function mlme_init_btm_cfg(), initializing the
btm_solicited_timeout, btm_max_attempt_cnt and btm_sticky_time
is done using the cfg_default() api, which always returns the
default value irrespective of the ini configured. This results
in failure of ini configuration from the WCNSS_qcom_cfg.ini file.
Use cfg_get() api to get the default value of ini items.
Change-Id: I773676cc67878f233cb6d14e0ad3ec1d79a5518f
CRs-Fixed: 2461612
VDEV UP command doesn't include right MBSSID information, it will
cause data stall issue and so on.
Fix is to provide right MBSSID information with VDEV UP command.
Change-Id: I0201722c14dee1b01b8dacc7e3095301fb02fd3a
CRs-Fixed: 2434405
CSA on DFS channels requires CAC period after RESTART response, peers
can leave during CAC period due to HB failure. But peers remain
connected in SAP and are not deleted.
Now if vdev down is called during CAC wait period, the peer delete
all is not called, and vdev delete is sent without sending peer
delete to firmare leading to assert.
This change adds the logic to internally disconnect all peers before
channel switch if CAC is required on new channel, i.e new channel is
DFS and pre-CAC is not done and ignore cac is not set.
Change-Id: I923fd11d1b9d4a2c606b19ff94baaf44397d3e20
CRs-Fixed: 2449104
MLME log macros like mlme_debug, mlme_err, mlme_info are having same
definition in legacy and common code. To avoid this redefination,
lagacy MLME log macros are renamed.
Change-Id: I71fbbcd1f74df73e82b799b318a9e9a95a3cb0c8
CRs-Fixed: 2446535
Disable OCE in STA vdev if any sta gets associated to SAP/GO.
This will improve the scan results in STA interface.
Without this fix firmware will do probe request deferral for 15ms
out of 28 ms , so 15ms is gone and rest is not sufficient dwell
time to get all AP probe responses.
Change-Id: Ie6f79c86025c53360c792c740a963ed8a1d9b936
CRs-Fixed: 2443190
Adaptive 11r feature that enables the AP to support FT-AKM
without configuring the FT-AKM in the network. The AP will
advertise non-FT akm with a vendor specific IE having Adaptive
11r bit set to 1 in the IE data. The AP also advertises the
MDE in beacon/probe response.
The STA should check the adaptive 11r capability if the AP
advertises MDE in beacon/probe and adaptive 11r capability in
vendor specific IE. If adaptive 11r capability is found,
STA should advertise the FT equivalent of the non-FT AKM.
Introdue a compile time flag WLAN_ADAPTIVE_11R_ENABLED to
enable/disable adaptive 11r support.
If the AP is adaptive 11r capable, set the is_adaptive_11r_ap
flag in bss descrtiptor. This flag will be sent in join request
and populated to pe_session. Also mark the CSR session as
adaptive 11r session based on this flag.
Add changes to check for the adaptive 11r service capability
advertised by firmware. If the host driver connects to adaptive
11r AP, enable RSO only if the firmware advertises adaptive
11r capability, else RSO should be disabled.
If the connection is adaptive 11r connection and if the adaptive
11r ini is enabled, set the adaptive_11r flag in
wmi_roam_11r_offload_tlv_param sent over the wmi command
WMI_ROAM_SCAN_MODE to the firmware. This will enable firmware to
filter the adaptive 11r AP from roam scan results.
Change-Id: If27a2393e3f4bb68942f5ebcec0135f57627f16b
CRs-Fixed: 2437988
Driver uses cipher stored in vdev to get the MIC length, which
may get updated if multiple peer(TDLS peer in STA case) get
connected to the vdev. Thus depending on latest peer cipher type
the MIC length will be calculated for all peers.
Add changes to store cipher info in peer and use it to calculate
MIC length for the frame if CRYPTO_SET_KEY_CONVERGED is defined.
Change-Id: I852e4b519f55d8020237989314f8506aa275f379
CRs-Fixed: 2444416
With current design, firmware sends the kck, kek and replay
counters as part of wmi_key_material tlv over the
WMI_ROAM_SYNCH_EVENTID event. But the maximum supported kck key
length in wmi_key_material was 16 bytes. But for FT Suite-B
(akm 00:0f:ac:13), the kck_bits is 24 bytes long and cannot be
sent over wmi_key_material. So firmware sends kck, kek and
replay counter values over the new tlv wmi_key_material_ext.
Host driver copies the kck key with fixed 16 byte length to the
upper layers. Introduce kck_length parameter in csr_roam_info
and roam_offload_synch_ind structures and copy kck based on this
length.
Also fix maximum number of AKM suites supported to 5, as some
certification test cases advertise 5 akms.
Change-Id: Iab050e3e3f7efead8070a02094998d15f7ffcbd0
CRs-Fixed: 2400770
Add gTxAggSwRetry for tx aggregation case, and
Add gTxNonAggSwRetry for non tx aggregation case.
Change-Id: I92265fb4e279eaf63c45f0134f997df02bca8737
CRs-Fixed: 2436305
MLME debug stats are added to the sta, ap and ext mlme ops
functions. This will help in debugging.
Change-Id: I55a3a91c6daf98a77557175447798c670be5709a
CRs-Fixed: 2439436
Add new ini to configure various roam trigger parameters:
1. "minimum_btm_candidate_score"
Consider the AP as roam candidate only if its score is greater
than minimum_btm_candidate_score. This value will be sent over
the WMI_BTM_OFFLOAD_CONFIG command.
2. "roam_scan_inactivity_time"
Device inactivity monitoring time in milliseconds for which
the device is considered to be inactive with data packets
count is less than configured roam_inactive_count.
3. "roam_inactive_data_packet_count"
Maximum allowed data packets count during
roam_scan_inactivity_time.
4. "roam_scan_period_after_inactivity"
Roam scan period in ms after device was in inactive state.
5. "btm_roam_score_delta"
Roam scan delta value for btm triggered roam scan. This value
will be sent to firmware over the WMI_ROAM_AP_PROFILE wmi
command.
6. "idle_roam_score_delta"
Roam scan delta value for Idle roam scan trigger reason. This
value will be sent to firmware over the WMI_ROAM_AP_PROFILE
wmi commnd in the roam_score_delta_param_list tlv.
7. "disconnect_roam_trigger_min_rssi"
Candidate minimum rssi value for disconnect roam trigger. This
value will be sent to firmware over the WMI_ROAM_AP_PROFILE
wmi commnd in the roam_score_min_rssi_param_list tlv.
8. "beacon_miss_roam_min_rssi"
Candidate minimum rssi value for BTM triggered roam. This
value will be sent to firmware over the WMI_ROAM_AP_PROFILE
wmi commnd in the roam_score_min_rssi_param_list tlv.
9. "bss_load_trigger_5g_rssi_threshold"
If connected AP is in 5GHz band, then consider bss load roam
triggered only if load % > bss_load_threshold && connected AP
rssi is worse than bss_load_trigger_5g_rssi_threshold.
10. "bss_load_trigger_2g_rssi_threshold"
If connected AP is in 2GHz band, then consider bss load roam
triggered only if load % > bss_load_threshold && connected AP
rssi is worse than bss_load_trigger_2g_rssi_threshold.
Change-Id: Ib026251a8ec403f4376a16a91ff1b5d969336816
CRs-Fixed: 2434922
Add new ini to configure required parameters to trigger
disconnect/idle roam scan:
1.enable_disconnect_roam_offload
When this ini is enabled firmware will trigger roam scan
and roam to a new ap if candidate is found and it will
not forward the deauth frame to the host driver. If
roaming fails after this deauth, then firmware will
forward the deauth frame to the host. If roaming is
successful, we will follow the normal roam synch event
path.
2.enable_idle_roam
When this ini is enabled firmware will trigger roam scan
and roam to a new ap if current connected AP rssi falls
below the threshold. To consider the connection as idle,
the following conditions should be met:
1. When user space sends "SET SUSPENDMODE"
command with value 0.
2. No TX/RX data for idle time configured
3. Connected AP rssi change doesn't exceed the
threshold
4. Connected AP rssi false below minimum rssi.
3. idle_roam_rssi_delta
RSSI change in current connected AP above/below which
idle roam scan will be triggered if other criteria is
met.
4. idle_roam_inactive_time
Time duration in milliseconds for which the connection is
to be considered idle.
5. idle_data_packet_count
number of tx/rx packets below which the connection is
idle.
Change-Id: Ibd1c91656ecd681f8dc83bc77197668a7f3bfa3f
CRs-Fixed: 2427132
Driver uses cipher stored in vdev to get the MIC length, which
may get updated if multiple peer(TDLS peer in STA case) get
connected to the vdev. Thus depending on latest peer cipher type
the MIC length will be calculated for all peers.
To fix store cipher info in peer and use it to calculate MIC length
for the frame.
Change-Id: I8afbf9a3bb43c294dbacbbaa7fa0746600937d11
CRs-Fixed: 2428482
Currently, only broadcast disassociate is supported and deauth is
send in a unicast manner.
For enabling broadcast deauth support, bypass the unicast deauth
and directly send broadcast disassociate.
Change-Id: Ie196bc955b5b9a9f48a474e5f109b2a6c73fa208
CRs-Fixed: 2420980
Currently, whenever roaming is triggered after a successful roam scan
firmware sends a BTM query to current connected AP when it is 11v
capable. Driver completes roaming with candidates received as part of
BTM request from AP. STA respond to AP with BTM response after
successful initiation of roaming.
Now the requirement is FW could send "BTM query with a preferred
candidate list" after a successful roam scan for some roam scan reasons
like PER, LOW_RSSI, HIGH_RSSI, MAWC, DENSE etc. Preferred candidate list
is obtained as part of roam scan based on firmware bss scoring logic.
Add new ini "btm_query_bitmask" to configure the bitmask for roam scan
reasons which is sent to firmware as part of RSO start via wmi btm config
cmd. Fw sends "BTM query with preferred candidate list" only for those
roam scans which are enabled through this bitmask.
New INI: btm_query_bitmask
Min: 0
Max: 0xFFFFFFFF
Default: 0x8
Bitmask : 0x8 (LOW_RSSI) refer enum WMI_ROAM_TRIGGER_REASON_ID.
Change-Id: I24b538745f2ac88d4e5c990573234e0f8a881b1f
CRs-Fixed: 2408111
Add new ini "roaming_scan_policy" to config roaming scan
behavior (DBS/non-DBS) in fw side.
This ini is corresponding scan_ctrl_flags_ext in
wmi_start_scan_cmd_fixed_param when host sends
WMI_ROAM_SCAN_MODE to fw.
Change-Id: Id95c3b9bb40d4f32ab3ff14a30f72c6150ac1884
CRs-Fixed: 2398531
Define ini parameter enable_sae_for_sap to enable SAE
support on SAP. It's enabled by default.
Change-Id: I94f099862ad04e0c9f5155ad9dd7165241540c45
CRs-Fixed: 2394661
Add ini to support partial and full bandwifth feature of UL MU-MIMO.
0-> no support
1-> partial bandwidth
2-> full and partial bandwidth
Change-Id: I94b2c8e525795a32a923e75f0650742f806dfcd5
CRs-Fixed: 2397536
Refactor the below two ini items to new converged cfg/ini
infrastructure:
"gEnableChangeChannelBandWidth"
"extscan_adaptive_dwell_mode"
"extscan_adaptive_dwell_mode" - move this to scm module
"gEnableChangeChannelBandWidth" - move this to mlme
Change-Id: I1ca6657a95c2cd47057f11ccf23c47347f3fc33b
CRs-Fixed: 2394240
Add the WMM config ini config
CFG_TL_DELAYED_TRGR_FRM_INT_NAME to MLME cfg.
Introduce the basic infra APIs related to these configs
from mlme.
Change-Id: Ifaf8072a78f21760e00973e625d7c8e41d8b51a6
CRs-Fixed: 2361533
Remove the following scan and ap protection related ini items:
CFG_AP_ENABLE_PROTECTION_MODE_NAME
CFG_ENABLE_MAC_ADDR_SPOOFING
CFG_SCAN_AGING_PARAM_NAME
Replace the corresponding hdd_config variables and replace
these variable callers with ucfg api from corresponding module.
Change-Id: I99a2659e2151ad285e9451b9e9cc036a199581a3
CRs-Fixed: 2378991
Based on new cfg framework, defines below five WNI cfg items and one
INI cfg:
- WNI_CFG_APSD_ENABLED
- WNI_CFG_OBSS_DETECTION_OFFLOAD
- WNI_CFG_OBSS_COLOR_COLLISION_OFFLOAD
- WNI_CFG_CURRENT_TX_POWER_LEVEL
- WNI_CFG_LOCAL_POWER_CONSTRAINT
- gTxPowerCap
Change-Id: I5546ea7a4efd142b546ad10a40712d40d2d3ea0d
CRs-Fixed: 2375857
Add dot11mode related cfg items in mlme cfg, and replace
old WNI dot11 modes with new MLME DOT11 mode enums
Change-Id: I6e866959f440ae781432c8aaa724b229c0874856
CRs-Fixed: 2362540
As part of ini convergence, enabled_11d and enabled_11h inis are
moved to converged framework but these inis are not removed from
legacy initialization path which is overwritting these values
to constant values and thus these inis are not taking effect.
Morever in the converged code also these inis are getting
initialized with default values instead of the values given
from ini file.
To address this issue, remove the legacy initialization of these
inis and in the converged ini path initialize these values with
the values configured in the ini files.
Change-id: I3d02c0d543fd561f1fd948b5c2850a509b1104e7
CRs-fixed: 2371528
Update qcacld driver to move IBSS INI params to converged CFG
component and cleanup HDD ini entriesi
Change-Id: Id8e4c0505113e556a8d64915a648f17fc5c0daf5
CRs-fixed: 2358493
Add two new WCNSS_qcom.ini values:
"roam_score_delta" - Factor by which the new roaming candidate
ap score should be greater than the score of the current
connected AP.
"roam_score_deltabitmap" - Roam triggers for which
roam_score_delta needs to be applied on the roam score of the
candidate AP.
Populate these two values to wlan_mlme_scoring_cfg from cfg
component in mlme_init_scoring_cfg. The values are sent to
firmware over the WMI TLV WMI_ROAM_AP_PROFILE in the below code
flow:
csr_update_score_params()->__lim_process_roam_scan_offload_req()
->wma_process_roaming_config()->wma_roam_scan_offload_ap_profile
Change-Id: I64f2a2328e485418547dae937c657f85225f1457
CRs-Fixed: 2367910
Add the following new WCNSS_qcom.ini value:
"prefer_roam_score_for_candidate_selection" - choose to sort the
candidates on roam score or preferred AP list send in the BTM
request frame by AP.
When this ini is set, host driver will
modify btm_offload_config bit 7 which will be read by firmware
to get this ini value.
“roam_candidate_validity_timer” - roam cache entries validity
timer. The candidates in the roam cache are valid only for this
time value. This value is sent to firmware over the wmi command
on the structure wmi_roam_offload_tlv_param
"btm_disassoc_timer_threshold" - Disassociation timer threshold
to wait after which the full scan for roaming can be started
after the AP has sent the disassoc imminent
Change-Id: I3ba5ba2182b1b6d722d9c315757332a1b3e62521
CRs-Fixed: 2369018
