Currently WMI_DBGLOG_TIME_STAMP_SYNC_CMDID command sent
every 1 sec causes RTPM collapse and inturn has power
impact. So to avoid this enable time of the day synchronization
only after connection/roaming.
Send WMI_DBGLOG_TIME_STAMP_SYNC_CMDID as part of RSO
start command.
Change-Id: Iee3cefe1318a6e5507a43cefb9666cc2a439fe06
CRs-Fixed: 3060762
wma to target_if convergence code is guarded under the feature
flag ROAM_TARGET_IF_CONVERGENCE and it's is enabled currently.
Remove the flag usage and remove the deprecated code(else part)
also.
Change-Id: I6973d9c366ec6a9c6164dd19f6f4775dd3ebf5f0
CRs-Fixed: 3049942
After mac randomization, the change interface causes
the WTC mode to be reset as part of the hdd_init_station_mode()
Initialize the WTC mode during start modules as part
of the mlme component cfg values population.
Change-Id: I4a57c29053f0100c14cef067952d49cecbdc8ea5
CRs-Fixed: 3047594
There are duplicate macros for the same purpose, hence
replace WLAN_ALL_SESSIONS_DIALOG_ID with TWT_ALL_SESSIONS_DIALOG_ID.
Change-Id: I63130869eed8dffcce85fe6a04586592ab3eaca2
CRs-Fixed: 3047686
Update operational rates set, extended operational rates set
and MCS based rates set in VDEV MLME legacy priv object on
connect success.
Refine the APIs for fetching these rates.
Change-Id: I7697b3d2e26e2fc565a2e672afe19f255af89d7e
CRs-Fixed: 3044036
Add ini configuration to limit supported TX/RX HE MCS rates.
In case of XR use-case, higher throughput is not needed but
higher reliability is expected. So, this ini provide option to
limit HE MCS rate capability to MCS0-7 to achieve higher reliability.
Change-Id: Id6343f5b28d341e5ee377d11ad8420e3b8ded6ef
CRs-Fixed: 3033342
Restrict the dequeue logic to send only 20 logs per second
to userspace. Add check to see if queue is empty before
trying to dequeue.
Change-Id: I778556c649d123718cf76c943c5b2ed7f6c6e8e5
CRs-Fixed: 3014554
Add new files for connect/roam logging. Add changes to
initialize the logging buffer.
Make changes to support enqueue/dequeue log.
Define enums for MAIN_TAG, Sub TAG, category.
Add structure definitions for logging buffer.
Change-Id: I1d283fcf464da90d4f5533214d480ddda156ec27
CRs-Fixed: 3013486
According to 11n CERT case - 4.2.44 AP WAP/WPA2 mixed security mode
test, AP works in HT mode, but driver disallow the 11n when TKIP
cipher present and switch to "A" mode, then no HT IE in Beacon.
Fix by check TKIP only cipher and other ciphter present(CCM)
to disable allow 11n.
Change-Id: Ia915c9aa45bef93a22b5f43004e533cc87978752
CRs-Fixed: 3033301
Currently the PS config received from kernel/userspace is set
to mac_ctx globally. This causes PS config set for one vdev to
override on the other vdev.
To avoid this, set the PS config per vdev.
Change-Id: I6a2e2a9d8fb67b94d9d5f1d4164077990bdaf4a5
CRs-Fixed: 3007060
Currently, the WLM mode could be recovered after disconnection
or interface down/up about random MAC feature. Since some OEMs
have different mechanisms to config WLM mode on their framework
implementation and don't expect recovering the WLM mode.
So add logic to set default WLM mode when disconnection happens.
And add ini wlm_latency_reset_on_disconnect to differentiate
the implementation in driver. By default
wlm_latency_reset_on_disconnect is false.
Change-Id: Idcb3baf6ab8f0533eb01c28ff1c12513f9995946
CRs-Fixed: 3006875
When TSPEC session is deleted, the access category of the data packets
should be downgraded to next lower AC. But this is not happening due to
acm mask is not getting updated when bss descriptor is NULL.
To fix this ssue, update acm mask from bss descriptor only when beacon
IEs are not present.
Also move qos related logic to LIM and bring missig changes which were
there before connection manager.
Change-Id: I9da80cf492b01762b4cc0a7b73271a0f5fe4b4a4
CRs-Fixed: 3011069
Peer addba request is rejected when reject_addba_req is set from
ini or vendor command.
Current reject_addba_req ini is replacing with gRxAggregationSize
when it is set 1 from ini.
Hence this reverts commit I80a4b78c1af77f5bfa68be3163f9e9a78cc64245.
Change-Id: I1cc57b88311da4dd8f26eade17072aaa1f0ebb59
CRs-Fixed: 3002204
Currently, the SAE authentication request retry happens
after a fixed timeout of 1 second in a STA DUT.
To make this timeout user configurable, add an INI to
configure SAE auth failure timeout.
Change-Id: I3a3944ab14564a944e0c83cc31a92847b5e8c5e0
CRs-Fixed: 3011892
Based on new requirement, add aliasing for gNeighborLookupThreshold
ini and update the range of this ini as well.
Change-Id: I0a62e209d6a62001d6aec48849c4900062ae5bc7
CRs-Fixed: 3011060
Save dual sta configuration in hdd context and
restore it after SSR. This allows driver STA + STA
connection in MCC/SCC.
Change-Id: Ia8bb8c845f0f76e7ce41ff32ab0a3bc6d5111018
CRs-Fixed: 2998225
Currently, wmi_roam_event_id data is extracted and processing is
also done in wma. This is not inline with component model where
target_if takes care of data extraction and handover the extracted
data to corresponding component(connection mgr in this case).
Add changes to support the same. As the legacy CSR/LIM is not
yet converged, have a wrapper from connection mgr to wma to call
these legacy APIs.
Change-Id: I0e22bbccfe21200b90771a01f9ee7454f4ecb119
CRs-Fixed: 2990355
Use wlan_cm_is_vdev_roaming() API in wma, instead of
wma->interfaces[vdev_id].roaming_in_progress.
Change-Id: Icb88246b2c45c052a1d42dece4983b1e534fe608
CRs-Fixed: 2993180
csr has a mac address field which is redundant, the same can be
retrieved from the vdev object.
Hence remove the mac address field from the csr and update the same
from the vdev object.
Change-Id: I948cf858ddb26795e236aa4099186e5d10f504a6
CRs-Fixed: 2990480
Add support to enable the "FT over DS" via
QCA_WLAN_VENDOR_ATTR_CONFIG_FT_OVER_DS vendor config
command.
This configuration helps the firmware to support
“FT over DS” instead of “FT over Air”
Change-Id: I493bf15f83bc39135aaeefa9d8ef328f0fc0cda3
CRs-Fixed: 2968680
Change ini type of all ini related to edca_ani, edca_wme,
edca_etsi. Also, use cfg_get instead of cfg_default for
fetching these.
Change-Id: Iba252f81d236c5b217e1d86c6511bbc52c2900b7
CRs-Fixed: 2952537
Station sends the BA and upgrades to the next possible BA window
size upon receiving all frames successfully from the current
window. Some IOT APs go out of sync from BA window size of the
station when AP fails to receive the BA sent from station. AP
transmits the frames again with previous window sequence number
and won't be ack'ed by station hardware as BA window has already
moved ahead. So, station deletes the upgraded BA and tries
to fallback.
Ideally, AP is supposed to consider the fact that "the previous
window transmission was successful when station upgrades to next
window size". But some APs take little longer time to
recover/upgrade to next window size. Don't delete the BA
immediately and have some tolerance(3 seconds) as the previous
negotiated BA just got deleted.
Change-Id: I6b277223f02dac521316cec20bd5d958785cc2e9
CRs-Fixed: 2970714
Currently only default values of local edca params are used for
WME and ETSI profiles. Therefore expose them as INI config options
so that driver is able to parse user configured edca params used
locally by SAP.
Change-Id: I81759570160a67e26f68501576d71a5fd3568cd7
CRs-Fixed: 2976143
This reverts commit I9e49ad5218f913f116cf4472f768f572740f14df
since ini based tx aggregation is configured based on firmware
capability.
Change-Id: I54541cd282eda6606e75fa347989624a0e0fef01
CRs-Fixed: 2963280
Add INI configuration support to enable/disable BSS color collision
detection offload in STA mode.
Change-Id: I9d8f096813d74242566ccae5f92e872bcaca6295
CRs-Fixed: 2965133
Refactor csr_roam_pmkid_req_callback to use
mlme_cm_osif_pmksa_candidate_notify and move other
unused API under CM flag.
Change-Id: I835d54804f733eddff48de38e4c545a87f34bb30
CRs-Fixed: 2965602
Currently there is no support to enable NAN on indoor channels,
as per the new requirement add an ini support to enable NAN on
indoor channels.
Change-Id: Ia3acbc133cab4865d8ad69992e893be91439f50f
CRs-Fixed: 2943668
Sometimes, the AP sends low values in the TPE IE resulting in low TX
power. This causes DUT to have throughput/connection issues. Add an INI
to skip over TPE IE only in 2g/5g case. TPE IE will always be considered
in 6G band.
Change-Id: Ia0750195bb0aabf304743e1ad89c8f6d0c9ef1a3
CRs-fixed: 2936492
Address below corner scenarios for dual sta roaming:
1. Initialize primary interface vdev id
with WLAN_UMAC_VDEV_ID_MAX.
2. Enable roaming while processing set primary interface
vendor command irrespective of dual sta roam policy.
3. Disable mcc_adaptive_scheduler before sending
WMI_RESMGR_ADAPTIVE_OCS_ENABLE_DISABLE_CMDID to FW and
enable it if host receives dual sta policy as unbiased.
Change-Id: I8e5254c6f9053bd5fe7f925af4b577e76c9b9a2e
CRs-Fixed: 2928870
As part of 11be enhancements in the driver, new configuration
parameters will be added. Define new APIs to support EHT
configuration parameters in the host driver.
Change-Id: Ic1890943a2f941e864d0df102e4954aac75d9f11
CRs-Fixed: 2908030
The commit Ic695e36e9b4fc9952cc405d1345b4a6a7d543dad, removed the
ini parameter etsi13_srd_chan_in_master_mode assuming that the
ini is obsolete and no longer being used. But, the ini is still
being used by the OEMs. So, revert the previous changes.
Change-Id: I6b2ba8b8e41ab96981b92e5ff4b2f610f92d7e43
CRs-Fixed: 2923688
Add support to reject the TWT setup request if there exists
another TWT session with different dialog id.
Change-Id: I59c0ba4279581bad14bec886d22c0ac65838ec17
CRs-Fixed: 2920494
Currently, mlme_twt_is_command_in_progress() function checks if the given
command is in progress or not. For inputs like WLAN_TWT_ANY, if this function
returns true then from the current logs, its not known which
active command in progress.
Hence for better debugging, enhance this function to return active command.
Change-Id: Ibc5c5babb042408b0e8988fe229d344ed98bfff3
CRs-Fixed: 2920494
