Fill ML partners info in connect response structure of the connect
notification to the supplicant.
Change-Id: I3b972254138d0f00ef63f2b4d336d142e6d5e2ae
CRs-Fixed: 3036325
In the new wifi specification 11be mode support is added, add a new
11be dot11 mode to qca_wlan_802_11_mode.
Change-Id: I9c5238ffaac96fcdf83e7c342a053dda7fc1f205
CRs-Fixed: 3050936
Add the attribute QCA_WLAN_VENDOR_ATTR_SCAN_PRIORITY to configure the
priority of vendor scan relative to other scan requests.
Add the valid values that this attribute can take.
Also, add an API to convert NL80211-based scan priority value to internal
scan priority value.
Change-Id: I6c62166c2dd6ea0880b332496b1e4bb0b41840c6
CRs-Fixed: 3044332
This change introduces the new roam set param WMI command to set
the roam params from host to FW.
Also added a fail_bssid param in wmi_roam_result TLV to know the
roam failed AP BSSID from the FW.
Added a new vendor command event for sending roam events stats
attributes to userspace.
Change-Id: I7a08635a7912cbd940d90a2d62433296740ad913
CRs-Fixed: 3050799
Introduce a new vendor command QCA_NL80211_VENDOR_SUBCMD_ROAM_EVENTS
that aims to configure/trigger the roam events from the driver.
Change-Id: Ifd9464cc8cb485890c8d171dc136d377f7a59fa1
CRs-Fixed: 3028404
From 5.11 kernel, nla_strlcpy() is renamed to nla_strscpy() since
it works more like strscpy() than strlcpy() after the enhancement.
Hence handle it accordingly in WLAN driver by creating wrapper API
wlan_cfg80211_nla_strscpy().
Change-Id: I4c5ca1738048605c842c827d1706353bc012fed8
CRs-fixed: 3060060
Populate and expose the following 320MHz spectral capabilities.
- Agile spectral scan support for 320MHz mode.
- Number of detectors used for spectral scan in 320MHz mode.
Change-Id: Ibea77d4ec8b1d9322ef82d1d48236836ffad24ec
CRs-Fixed: 3053059
Add a QCA vendor attribute to indicate agile spectral scan support for
320MHz mode. Add another attribute to indicate the number of
detectors used for spectral scan in 320MHz mode.
CRs-Fixed: 3045445
Change-Id: I4667e93e8074af122bfe9e08bededc439811afbf
Spectral scan bandwidth value that is received over NL80211 socket will be
in NL80211_CHAN_WIDTH format. Convert it into phy_ch_width format before
using it in the driver. Similarly, convert the spectral scan bandwidth to
NL80211_CHAN_WIDTH format before sending over NL80211 socket.
Change-Id: Ic3b464bff6ac62a9d0c1f915118a4ca6db416252
CRs-Fixed: 3048195
Add Spectral APIs to convert channel width values
from enum phy_ch_width to nl80211_chan_width and
vice-versa.
CRs-Fixed: 3029184
Change-Id: I60fb7fb04b943b0d70c569ff6587e5e8efd7722b
Add new vendor command to configure monitor mode packet filter
parameters which includes data/mgmt/ctrl frame types.
Change-Id: Ie5e5d35b725e3d1b617edc1c889dc269b22a3673
CRs-Fixed: 3025489
Add support to configure spectral scan bandwidth as provided by the user.
Validate the user configured value before applying it. As the spectral scan
bandwidth is an optional parameter, when the user doesn't configure it, use
configure the spectral scan bandwidth to the maximum value supported by the
target for the current operating bandwidth.
Also, populate the spectral scan bandwidths supported for different
operating bandwidths on different targets.
CRs-Fixed: 3042424
Change-Id: I266aa5489b0ce5c149968067a06e1cc65bb4e3b7
Add new attributes for supporting MBSSID multi groups notifications
to qca_wlan_vendor_attr_mbssid_tx_vdev_status
(QCA_NL80211_VENDOR_SUBCMD_MBSSID_TX_VDEV_STATUS).
CRs-Fixed: 3028263
Change-Id: I9ce3f945cf4d3cf91af57363d7a25f14d5c90fa6
There are instances in the code where the response is sent from the
driver to the kernel indicating the allocation flags which is
used by the kernel to allocate memory
In those situations, we should pass the allocation flags based on
the context in which the response is sent.
Send the response with the right allocation flags to the kernel.
Change-Id: I39ade12bd3603acf622a9ca49b4d1d0b79da4585
CRs-Fixed: 3037225
Validate assoc request and response IE pointer
and length before sending the connect response
to the cfg80211 layer, else if there is a mismatch
between assoc request and response IE and length,
it would result in a panic.
CRs-Fixed: 3029994
Change-Id: I6bb285719c9749cb8c42306a95c392a01555d67f
Add support to send connectivity logs from g_wlan_logging thread.
Add new HOST_LOG_DRIVER_CONNECTIVITY_MSG event flag which wakes up
the gwlan_logging thread when set.
Also register connection manager callbacks to send the logging event.
Check if logging queue is empty whenever the gwlan_logging thread
is woken up and send the logs to userspace if the count doesn't
exceed the allowed threshold.
Change-Id: I3fdb8358f9048a277e2f03894c0e6a17376b0da0
CRs-Fixed: 3029279
Add a new attribute into qca_wlan_vendor_attr_ll_stats_results to
support getting interface time slicing duty cycle info.
Change-Id: If6a34cd298c1cb41e0e29a24f2336eed76b98329
CRs-Fixed: 3020795
Update QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_TIME_TSF
TWT attribute to use it in TWT setup command to pass TSF value.
Change-Id: I410d72ff7771a3899ceb2487a8eb9dd7ad77299c
CRs-Fixed: 3029024
Add new QCA vendor attributes to get connectivity and roaming
related parameters from the driver for logging.
Change-Id: I8d4db7e43bcd2f406d124d7224a91338550420f0
CRs-Fixed: 3029276
Add a QCA vendor attribute to configure the driver to use
roam band set by userpace. This attribute is also used to
get the configured roam band from the driver.
Change-Id: I5ea7f9d12b2a01e1b4baa43e46342af34bebba49
CRs-Fixed: 3009747
Add the following vendor attribute to indicate the bandwidth to be used for
Spectral scan operation.
- QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_BANDWIDTH
CRs-Fixed: 3024152
Change-Id: I8ffc5f4d0106cb293ac81408e3b691fc29808080
Use CONFIG_CNSS_OUT_OF_TREE to control if CNSS family drivers are
built from in-kernel-tree source or out-of-kernel-tree source since
the exposed header files will be in different paths. This is also
for backward compatibility.
Change-Id: I698492f175ea140e6854c372f366a63f36de24c9
CRs-fixed: 3022556
User configuration support to use scan request BSSID value
in Probe Request frame RA during the scan.
Change-Id: I40d07e4c3e4814a9c816b3e426dcbb63df7ddf27
CRs-Fixed: 2945679
Enhance QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD to fetch thermal stats
for different temperature levels from the driver to userspace. The
stats will be stored in the driver/firmware for predefined temperature
levels and will be reported to userspace when
QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD is sent with command type
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_THERMAL_STATS.
The thermal stats can be cleared from userspace by sending
QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD command with type
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_CLEAR_THERMAL_STATS.
Change-Id: I937bc89865df484a068c887d906df5a9502f1925
CRs-Fixed: 3016851
Vendor commands using nested attributes should use properly defined
policies instead of RAW_DATA and the same has been enforced since 5.4
kernel. Hence, defined a policy for the vendor command
QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS.
Change-Id: Ibdf7a19ddd533653c0706b4f0cf3ac97d31b9e40
Add QCA new status vendor attribute
QCA_WLAN_VENDOR_TWT_STATUS_POWER_SAVE_EXIT_TERMINATE
to indicate the TWT session termination due to power save
exit request from userspace.
Change-Id: I515e4e8384b92b2556d72c4015252f075577f13c
CRs-Fixed: 3013360
Add QCA vendor attributes to configure the driver to enable/disable
the Broadcast TWT support and Rx Control Frame To MultiBSS support in
HE capabilities information field. This attribute is used for testing
purposes.
Change-Id: I22a2646b642d1e764e89b209e0c872ac113ca2ee
CRs-Fixed: 3012996
There are instances in the code where the response is sent from the
driver to the supplicant indicating the allocation flags which is
used by the supplicant to allocate memory.
In those situations, we should pass the allocation flags based on
the context in which the response is sent.
Send the response with the right allocation flags to the supplicant.
Change-Id: I85f1c29fc66ba51a9f9c645692712c3a25b7fed1
CRs-Fixed: 2987552
Add new QCA vendor attribute to configure the driver to enable/disable
the BSS max idle period support. This attribute is used for testing
purposes.
Change-Id: Ib63c81e34344e637b638638b1da323102c66d906
CRs-Fixed: 2994951
Add a QCA vendor attribute to configure the driver to use scan
request BSSID value in Probe Request frame RA(A1) for scan.
This attribute is used for testing purpose.
The driver saves this configuration and applies this setting to all
user space scan requests until the setting is cleared. If this
configuration is set, the driver uses the BSSID value from the scan
request to set the RA(A1) in the Probe Request frames during the scan,
else the broadcast address is set in the Probe Request frames RA(A1).
Change-Id: I0b26fde5f631e99f3e6d0ecf52918cd49d0153c7
CRs-Fixed: 2994935
The log output will be too verbose when the following scenario
is hit:
1) hostapd is started on chan 149 with cc=US
2) ref-sta connects to sap
3) ping -i 0.01 to ref-sta from dut
4) set cc=JP on dut
and the verbose log output will result in a wlan scheduler
watchdog bite on some platforms.
Use rate limited versions of log outputting api to avoid the
instabilities brought by this.
Change-Id: Id87d81070334aab145bae6909857fd5d2851008a
CRs-Fixed: 2868738
Add 4.9 ghz frequency check also in scan command. This change
is needed so that scan entry is formed and association happens in 4.9ghz.
Change-Id: I2fbf719ea6a5e747e07a5973a2da3d2ca2d11b7b
Add TSF cmd to enable and disable automatic TSF report from the target
to the host.
Change-Id: I17b255299f55b8e78968d951824726d533a7c6e9
CRs-Fixed: 2991909
Add QCA vendor attribute QCA_WLAN_VENDOR_ATTR_CONFIG_FT_OVER_DS
to configure FT over DS to the driver/firmware.
Change-Id: I0745c27c6bc0a8d1075d753f1d898870479105f8
CRs-Fixed: 2968681
cfg80211tool athX scanband <val> config is used to
select a specific band to scan (i.e., 2.4GHz and/or
5GHz). The initial support for this command was
added as an iwpriv for WEXT-based scanning through
IOCTL. However, on bringing up cfg80211 support,
support for not extended for the cfg80211-based
vendor scan.
Add support to ensure that this command will
control band configuration for scanning for cfg80211
vendor scanning.
CRs-Fixed: 2969914
Change-Id: Ie3b7140ea78f15533e73fbe6251e670e6faa6d29
Add parameter 'bool sync' for wlan_cfg80211_crypto_add_key()
to indicate whether or not to add key synchronously.
If it's set to true, wait until install key complete event
is received.
Change-Id: I9a69d486665fb3f65a5720ccfbfb638c09329418
CRs-Fixed: 2865832
