Command ring is now renamed to credit ring on QCN9000
and used for credit based flow.
Renaming the ring to give meaningful name.
Change-Id: I726aed19477fcfb256e4e0cca8ddb9389035b58c
CRs-Fixed: 2562640
Update CE registers offset during hal srng configuration
and configure CE IRQ for qcac6750.
Change-Id: I4fd3d37783361f0029c7ef80e32425f8790d1250
CRs-Fixed: 2617699
For restricted 80+80 MHz FR, target team initially added
wmi_service_bw_165mhz_support to indicate the target is capable of
supporting restricted 80+80 MHz.
Later, they have added wmi_service_bw_restricted_80p80_support to indicate
the same. Therefore rename wmi_service_bw_165mhz_support as
wmi_service_bw_restricted_80p80_support.
Change-Id: I12229b5d35911d4c34e63902c09592187d902bed
CRs-Fixed: 2621249
Peer key security type is set in cdp_set_pn_check,
this API is called in key install step, but only
update Ucast field even if in Mcast key install.
This may be set wrongly if Ucast and Mcast security
modes are different. Add a new API to set security
modes of differ key types separately.
Change-Id: Icaa63139d117de75633ca1f81eb618c6b9294b53
CRs-Fixed: 2617461
Genoa FW use the hardcode 128 for ce5 destination ring
entries, so change host code to follow up with it.
Change-Id: I1b7e70f8244efc3d3ca3dc659fb3d7687828b9c4
Currently there is no support to dynamically set dwell time
for 2g channels.
Add support in existing command SETDWELLTIME to dynamically
configure dwell time for 2g channels.
Along with set, add support to get dwell time for 2g channels
with the existing driver command GETDWELLTIME.
Change-Id: I8a71e39338e7a81690140f50bc3c5ac7b0bd63eb
CRs-Fixed: 2620370
Firmware advertises WMI_SERVICE_ROAM_SCAN_CHANNEL_LIST_TO_HOST_SUPPORT
at the time of initialization, that means host can querry for roam scan
channels list to firmware.
Host driver sends WMI_ROAM_GET_SCAN_CHANNEL_LIST_CMDID to firmware to
querry roam scan channels list and firmware responds with an event
WMI_ROAM_SCAN_CHANNEL_LIST_EVENTID.
Change-Id: I419a0206d7b06b6186d0c333c951bca5206f342f
CRs-Fixed: 2620607
For Genoa, it use IPA GSI, and whether gsi enabled
or not decided by ipa dts setting, which should get
from IPA driver, so add such information.
Change-Id: I6321afaf35c57d7d5865b896193ab1d44042ee4c
Request is cleared before response for race condition between request
thread wificond and response work thread.
1. wificond thread sent cp_stats_get request and waited for
response.
2. worker thread got response from F/W, completed the request.
3. Wificond got the response, finished the request.
4. wificond triggered another cp_stats_get request, created
new request, set pending request bit TYPE_STATION_STATS.
5. Kworker thread clear the pending request bit
TYPE_STATION_STATS.
6. Cleared request TYPE_STATION_STATS couldn't be completed any
more, wificond thread waited for 1.6s, timeout happened.
Fix: Clear pending request bit TYPE_STATION_STATS before
complete the request, make sure old pending request bit is
cleared before new request of same type is set.
Change-Id: I7b89571b1e95a6e17aec9d649bd3adfccf3eb02e
CRs-Fixed: 2619370
Increase the peer ref count before requesting for reo
queue stats and release the ref count after receiving
the queue stats on the reo status srng.
Change-Id: Ife3b87951e767414efa1bfb45486cd364578d2a7
CRs-Fixed: 2604862
Various QDF logs being printed to the driver log are not necessary for
debugging purposes.
Cleanup the logs that are not required.
Change-Id: I9c5685b4d31a741703667943ac458921fa0d480e
CRs-Fixed: 2616210
For qcn9000, As part HW enhancements, PPDU_ID is sent
in reo_entrance_ring descriptor instead of RX_MPDU_START
tlv. Add support to read ppdu id from descriptor.
Modify existing hal API hal_rx_hw_desc_get_ppduid_get ()
arguments to pass RxDMA ring HW descriptor.
Usage:
a. Use hal_rx_hw_desc_get_ppduid_get () -
to get ppdu id from rx_tlv_hdr or hw descriptor based on target.
for qcn9000, this API gets ppdu_id from HW descriptor,
for other platforms, gets ppdu_id from rx_tv_hdr
b. Use hal_rx_get_ppdu_id () - to get ppdu_id from rx_tlv_hdr
Change-Id: I5838227c12cde50cbb2a9da7a0d8056b8b9b7ef5
In a SON WFA testcase, the QCA AP advertises the channel set in
operating class 128 as individual IEEE channel number (for eg. 36, 40,
44, 48 etc.) instead of center channel (for eg. 42, 58, 106 etc.) to
the third party AP.
As a result, the third party AP creates Front Haul VAPs in High Band
radio when the QCA AP is configured to Low Band, due to incorrect
channel set advertised to it.
To fix this issue, add an API reg_get_chan_or_chan_center to
calculate the center channel number for a 80MHz, 80_80 MHz and 160
MHz bandwidth channel, and use it to calculate the center channel
number within the channel set for a particular operating class in the
operating class table.
Change-Id: Idf7df70c8d01ed79b43d0ba21db7b07189f3f710
CRs-Fixed: 2612258
Currently on the STA interface if the scan
comes the driver puts it to NON-DBS scan if the
high accuracy request comes, but if the NDP
peers are active this causes a throughput loss
as scan takes much time to complete.
Fix is to do a DBS scan if the NDP peers are
attached to a NDI interface.
Change-Id: I798fd388f2bf010304ba1f6777680cf4d1f3ccfb
CRs-Fixed: 2615541
1)Configurable number of bytes to log
2)Add support to record only specific WMI command/events
Separate buffers are added to save user specified WMI commands and events
1.To record specific wmi cmd, e.g. WMI_VDEV_START_REQUEST_CMDID
echo 0x5003 > /sys/kernel/debug/WMI_SOC0_PDEV0/filtered_wmi_cmds
2.To record specific wmi evt, e.g. WMI_MGMT_RX_EVENTID
echo 0x7001 > /sys/kernel/debug/WMI_SOC0_PDEV0/filtered_wmi_evts
Results of recorded specific WMI command/events:
1. WMI commands, e.g.:
cat /sys/kernel/debug/WMI_SOC0_PDEV0/wmi_filtered_command_log
2. WMI events, e.g.:
cat /sys/kernel/debug/WMI_SOC0_PDEV0/wmi_filtered_event_log
CRs-Fixed: 2597854
Change-Id: I1e90a13ac0717f1f37ba998fb1d06a990d3f4fa2
FSE setup, FSE cache flush and FISA config commands do not have
response, tag them as HTC_TX_PACKET_TAG_RUNTIME_PUT so that get on
runtime_pm is released. Without this target fails to go to runtime_pm
suspend.
Change-Id: Ibb14484dd50c62bb4680b41acf93ce3da1bec796
CRs-Fixed: 2606884
Move flow learning and operation HAL macros from header file hal_rx_flow.h
to hal_rx_flow.c.
1) hal_rx_flow.c conditionally compiled in based on the feature
2) Function implementations are too big to be defined in hal_rx_flow.h
Replicate hal_rx_flow_setup_fse specific to FISA Flow programming.
Implement function to dump the FT entries.
Change-Id: I7db943495eecfc064c4b696939da83d1d8ed9280
CRs-Fixed: 2599917
Add INI dp_rx_fisa_enable to enable/disable FISA feature.
Disable the feature by default.
Change-Id: I0cc524956e32ab9f2b5c556d8ae2e1855e8d3513
CRs-Fixed: 2599917
In MCL code, QCA_DFS_NOL_OFFLOAD is no defined,
which causes the utils_is_dfs_cfreq2_ch always return
"false".
In function vdev_mgr_start_param_update
the "dfs_set_cfreq2" needs to be set correct dfs flag from
utils_is_dfs_cfreq2_ch so that vdev start wmi command will include
correct DFS flag - WMI_CHAN_FLAG_DFS_CFREQ2 for AP home channel.
Move utils_is_dfs_cfreq2_ch function out of WLAN_DFS_FULL_OFFLOAD
and QCA_DFS_NOL_OFFLOAD build flag.
Change-Id: I341db02c4db3ad3b21d8b2c115b2baffc3df3164
CRs-Fixed: 2619273
Memory optimization of unused TX rings by not configuring rings that are
not being used. Configure 2 rings for host in the case of IPA, instead
of configuring 3. If IPA is disabled then configure only 1 set of TX
rings for host.
Change-Id: I251606c728f3020a13e45e8c8386970c8a641f0a
CRs-Fixed: 2530572
Currently while printing commnad information new
line is added which needs to be removed.
Change-Id: I639508a9a14db173f8d61d7a55c4ec99db4f1a1f
CRs-Fixed: 2618863
The scheduler maintains a history of the recent messages
in the scheduler that were queued, started or completed execution.
This information can be reviewed while debugging issues
if the scheduler is taking longer to process any message.
The new API will print the scheduler history on request.
Change-Id: I2ed7989296f6891cfd9779e7b96383253d680f51
CRs-Fixed: 2599281
Currently computation of Rx rate depends on Multi-user MCS
and NSS even for SU PPDU. For Single User PPDU, this becomes
invalid since computation of Rx rate should be based on SU MCS
and NSS.
To fix this, use respective PPDU information(MCS and NSS) and
calculate Rx rate based on ppdu_type.
Change-Id: Ic18cbabe192e2cafce5cdceb5644368ff6b7c9fb
CRs-fixed: 2617063
Kernel 5.4+ is returning created wake lock pointer which needs to be
stored in driver wakelock structure, which needs to be used in
acquire, release, and destroy APIs. This change updates the QDF wake
lock structure accordingly to handle both older and new kernels.
Change-Id: Id0c5279613fa4c4c84205905fef7557c6b852017
CRs-Fixed: 2615065
Fixing compilation issue for USB interface on non-
msm platform by adding pld_common.h header file in
if_usb.c which contains cnss pld specific definitions.
Change-Id: I67b3fd29bb21d827618655f337f38beb683a4c41
CRs-Fixed: 2615907
For QCN9000 max FFT size supported is 9 for 20 MHz and 10
for all other bandwidths. Add FFT bin size max based on
bandwidth to support this requirement.
Change-Id: If383dc914937d68c9f4781463a3a965c73bc78f1
CRs-Fixed: 2617674
Added new qca5018 hal folder to add ipq5018 specific changes.
This includes interface files to access ipq5018 hal registers.
Change-Id: I7e19dc7c8719fa175695b268dc904fb4521a3330
Do not process or drop rxdma error decrpt frames. In case of
decrypt error the decryption is not proper and Rx OLE gets
corrupted bytes. So accessing these can lead to invalid buffers.
Change-Id: Idb3f942facf08fc26bde0fd9826db28955ca01d5
CRs-Fixed: 2613068
Currently there are unnecessary/duplicate logging. Identify and
reduce those logs that are not necessary.
Change-Id: If47a4fc0762a7a11666771e76a56d4fa1013647b
CRs-Fixed: 2615419
