Add conditional check before calling wcd usb api
Change-Id: I9046ece531ea009e8b8cd5db98675960d928c1c6
Signed-off-by: Sarath Varma Ganapathiraju <quic_ganavarm@quicinc.com>
The modifier - static - request the function to be used within the file.
Remove static modifier to fix the build break.
Change-Id: I46da9dbeb7c3945f8a1bbfa55998e75b5cbdc70b
Signed-off-by: Erin Yan <quic_xinyey@quicinc.com>
Change default OVP threshold to 4.2V, but set
to 4.0V during CODEC reset.
Change-Id: I4aa8accf7466e144902a2f6a250c1aad91084e95
Signed-off-by: Sam Rainey <quic_rainey@quicinc.com>
Load proper dtb image when fuse is not supported.
Change-Id: If87fcc715954b1526fa6718a3453357cbb8957e3
Signed-off-by: Faiz Nabi Kuchay <quic_fkuchay@quicinc.com>
Update change to have proper input validation of pcm_id in
aud_dev_sysfs_store to avoid out of bound issue.
Change-Id: Ia95a8dff8db84d95b4b02a5674f64a85f67e4be0
Signed-off-by: Deepali Jindal <quic_deepjind@quicinc.com>
added condition to check for spkr status before enabling
GLOBAL_PA to make sure PA is enabled only when Speaker
is in Enabled state.
Change-Id: Ifa4eeb7d8561bb68193abae16221dd8b2464029c
Signed-off-by: Ganapathiraju Sarath Varma <quic_ganavarm@quicinc.com>
Fix two times calling of wcd939x_mbhc_hs_detect.
Change-Id: Id3d42a4ede8c8ac226e91506d6c69f9dcb2cd401
Signed-off-by: Faiz Nabi Kuchay <quic_fkuchay@quicinc.com>
Added timing for spf_ready_check api, rightnow
we are waiting for 10sec when apm is not ready
instead updated timing as below
during adsp loading 10sec
during add child devices 5sec
during prm send pkt 0sec
Check for q6 state at the start of gpr_send_pkt.
Change-Id: I94a93842cc0dc7fc9acd7232f413b3c3a9038536
Signed-off-by: Ganapathiraju Sarath Varma <quic_ganavarm@quicinc.com>
Sampling rate of the decimator is reset to hw reset value during
power down event in existing code. This code was implemented for
a safety precaution.
Remove this code as it is causing a side effect for VA use cases.
Side effect of existing code: during successive VA use cases runs,
Sampling rate is not updated as the device is not closed completely.
Due to this, decimator runs with incorrect sampling rate for
successive runs and causes failure.
Change-Id: I5e60c656043d06c3d999de183698adfffdaa44d1
Signed-off-by: Vangala, Amarnath <quic_avangala@quicinc.com>
update the usbss switches only once the HS removal is completed.
Change-Id: I050b30c2c407f189cefed56ec137848efb45e5b4
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Add proxy RX and TX dai for proxy record path
Change-Id: I306f970ec7e7c7543e47636947c0ecb0226ed976
Signed-off-by: Anirudh Mahto <quic_amahto@quicinc.com>
Update holi machine driver to support ATTC over FSA driver.
Change-Id: I3ac6af5908c4b69e8e8d65a006505fa0f4ceb009
Signed-off-by: Sairam Peri<quic_peri@quicinc.com>
Update zdet and xtalk to support high voltage microphones
with improved accuracy.
Change-Id: I4b0af5ade7f653de4a938162302ec21c4a09891f
Signed-off-by: Sam Rainey <quic_rainey@quicinc.com>
In msm-cdc-supply, add checks to prevent regulator_disable()
from being called if the cdc vote has already gone through.
Also add error messages if this happens and also add debug
messages whenever on-demand supplies are getting enabled/disabled.
Change-Id: I696be0a1ea638ffcf903e81a8b61c6a8dde984a8
Signed-off-by: Eric Rosas <quic_erosas@quicinc.com>
Remove the PRE_SSR blocking notifier call.
This is not required as early down event is not handled.
Change-Id: Ie448fa2af92edd484d282200cf350c6bddc5f99d
Signed-off-by: Vangala, Amarnath <quic_avangala@quicinc.com>
Remove handling for PRE_SSR event.
Move the gpio handling during SSR to SSR UP event.
Change-Id: I2bb1b66db455c6211f1bf12c9e19d7e306a6243a
Signed-off-by: Vangala, Amarnath <quic_avangala@quicinc.com>
Add machine driver support for WCD937x.
Change-Id: I863b95255caf99565dfc7c74b0f54891f58dc0df
Signed-off-by: Faiz Nabi Kuchay <quic_fkuchay@quicinc.com>
As per current code there isn't a way to load custom adsp-mdt image.
Use kernel api to load custom adsp-mdt.
Change-Id: I42f1186741dff0b9bd953e536eb33907d3c6cb90
Signed-off-by: Faiz Nabi Kuchay <quic_fkuchay@quicinc.com>
Enable wcd938x codec for blair and holi platforms.
Change-Id: I43f8feaace951ad439fcbba86204113b2b95330b
Signed-off-by: Sairam Peri<quic_peri@quicinc.com>
add dt flag for enable and disable sleep api.
Change-Id: I97e9aa8c319d478b2fa979c38f5cc4559e1fb435
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Enable compilation of wcd937x on palawan.
Change-Id: Ib9521fe83cba88a1ac36972938f2a3921d5efecb
Signed-off-by: Faiz Nabi Kuchay <quic_fkuchay@quicinc.com>
Modify the inputs of the target registration to accept
multiple variants and allow for an optional "product"
parameter.
Also some refactoring done to promote ease of use.
Change-Id: Ib18cd36734fc35326b8dc675f548d47d9a95cf1c
Signed-off-by: Eric Rosas <quic_erosas@quicinc.com>
Updated the wsa dailink to support 384Khz HS playback.
Picked latest codec fixes to kernel6.0.
Change-Id: Ia570dc3f3ed55415ac374e1ba3bb6f2277dade96
Signed-off-by: Sairam Peri<quic_peri@quicinc.com>
moved compponent inside the #define of WCD_USBSS, to avoid
compilation issue for unsed of WCD_USBSS_I2C in some targets.
Change-Id: Ia2f64182aa8330db10122e70f12066ffebe9d16b
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Add support for CPU LPR API for pineapple target.
Change-Id: Ic934591b254fcf7af41c4e49396c81ba75530529
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Signed-off-by: Phani Kumar Uppalapati <quic_phaniu@quicinc.com>
