Print info related to WTC BTM roaming coming via
wmi_roam_trigger_reason_tlv_param.
Print timestamp, which indicates the time when btm response is sent
to AP, coming via wmi_roam_btm_response_info_tlv_param to HOST.
Change-Id: I2c408527739e1e2831015dd7b959ab17299abf6b
CRs-Fixed: 2740597
In scenarios where p2p is going to be the first connection,
while performing group negotiation, pass up the allowed non-pcl
channels with valid weight so that supplicant can include these
channels as well during negotiation.
Passing interface mode to policy_mgr_get_valid_chan_weights and
populating the channel list based on policy_mgr_is_concurrency_allowed
api for the given mode and assign WEIGHT_OF_NON_PCL_CHANNELS for all
allowed channels.
Change-Id: I8ff08163e6490642f9c2ebd9ca08f1275a2bb1b8
CRs-Fixed: 2734756
In wlan_cm_roam_send_set_vdev_pcl(), pcl_req intially checked
for NULL can be dereferenced later.
Validate pcl_req and return error if pcl_req is NULL.
Change-Id: Iccc4e09c636d2643c319a1767bf8f673d6d36a80
CRs-Fixed: 2734082
Add macro ROAM_OFFLOAD_V1 for new code and implement below functions
for connection manager roam part:
csr_handle_roam_state_change() roam offload state related handler.
Filling WMI_ROAM_SCAN_RSSI_THRESHOLD cmd parameters related process.
Change-Id: I0351155ca5a3d68ade6568c7527c5708582ccf1a
CRs-Fixed: 2730826
Userspace can configure different roam control params as
defined in qca_vendor_attr_roam_control through the roam subcmd
QCA_NL80211_VENDOR_SUBCMD_ROAM and the below attributes:
QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_SCHEME
QCA_ATTR_ROAM_CONTROL_CONNECTED_RSSI_THRESHOLD
QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD
QCA_ATTR_ROAM_CONTROL_USER_REASON
Send value of above attribute to fw through command
WMI_ROAM_ENABLE_DISABLE_TRIGGER_REASON_CMDID for trigger
reason WMI_ROAM_TRIGGER_REASON_BTM_WTC.
Change-Id: I17502eebab56652192164144b7ebdadb32033117
CRs-Fixed: 2729119
The event WMI_ROAM_STATS_EVENTID is received after
every roam, once the roam synch complete is sent by the host.
This event contains details regarding the btm response.
This helps in debugging/understanding the scenario when roam
failure happens.
Print the info received related to btm rsp and roam initial
info into kmsg.
Change-Id: Icb2058eed5df3265018b3c53548d123f3a4faf4f
CRs-Fixed: 2728267
The band_capability field is used in other places to be
a bitmap over reg_wifi_band. Update the field in wma_tgt_cfg and
wlan_mlme_generic to take the same bitmap for consistency.
Update all references to these fields to expect a bitmap as well.
Change-Id: I8abd697e2fbe02b4eadd32f3027bef7408bac2a0
CRs-fixed: 2726710
Add changes to handle transition to the 2 new states:
1. Roaming in progress: Switch to this state when roam
start notification is received from firmware.
2. Roam Synch in progress: Switch to this from RSO
STARTED state if roam synch indication event is received
from firmware. Change to this state is also allowed in
RSO STOPPED state if supplicant disabled roaming on that
vdev - to allow roam invoke to be processed.
Also query the state machine to get the roaming status instead
of using discrete flags at various layers. Clean the redundant
roaming in progress, roam synch related flags.
Change-Id: Ide20a30d9d8c20a96d8bba70367b51b8643cae09
CRs-Fixed: 2725443
Rename the existing roam offload states to include
WLAN_ prefix. Add 2 new states:
WLAN_ROAMING_IN_PROG - Roaming has started at firmware, this is
after candidate selection at firmware.
WLAN_ROAM_SYNCH_IN_PROG - State after handoff is complete at
firmware.
Also move the roam_offload_state enum to connection manager.
Change-Id: Ib1f38d200393849253893113172cdfc69e381fb3
CRs-Fixed: 2725387
Send Vdev pcl command on both connected STA vdev when sta+sta
roaming is enabled. Handle below cases:
1. When 1st STA is connected send PDEV pcl command for the
first sta. Set pcl_vdev_cmd_active false.
2. When 2nd STA comes up, Set pcl_vdev_cmd_active to true,
send vdev PCL for 1st sta before enabling roaming(disabled
as part of the connect on 2nd STA).
3. For second STA force dbs connection when
enable_dual_sta_roam_offload ini is enabled. Set the channels
of the 1st connected STA band as invalid and remove these
channels from the scan filter.
4. On disconnection of 2nd STA connection, clear the vdev
PCL sent for 1st STA and then send PDEV pcl command.
Also make changes to send set PCL command after roam init
is done before RSO start is done at firmware to avoid assert.
Post set pcl command from sme/csr through lim/wma/wmi to avoid
the above condition.
Disable roaming on the vdev before sending set PCL command to
avoid roaming on undesirable band & channels.
Change-Id: I6bd869015b7248fe5c5c90b6e2fa0174995be197
CRs-Fixed: 2725360
Enable compilation of the connection manager roam files with
Kbuild changes.
Add new API to store and retrieve the firmware scan channels at
mlme. Also add initial support to post SET_PCL command through
lim, so that it is not sent before ROAM init command.
Add changes to restrict connection of the 2nd STA to
channels on the other band of the 1st STA connected band.
This is done by filling only the allowed band channels in
the scan filters for the 2nd STA connection. If only
1 STA is active, it is allowed to connect on any band.
Add header gaurds for missed header files:
wlan_cm_tgt_if_tx_api.h
target_if_cm_roam_offload.h
Change-Id: Id2bce12b9663ed635ea46164169b088461aab870
CRs-Fixed: 2720341
Add new connection manager API to send vdev pcl command for
sta + sta roaming per vdev. For vdev pcl command, the weight of
the 1st sta connected band will be set to 0.
Add connection manager roam API files for TX ops,
connection manager target if wrapper to send the vdev
pcl command to wmi. Introduce new API to get dual sta
roaming support and save it in cm roam public struct.
Change-Id: I56a7475b0b9865e969917ec05a117f206f198111
CRs-Fixed: 2712346
