Currently the DebugFS logic in utils/fwlog/dbglog_host.c is protected
by the flag WLAN_OPEN_SOURCE. The WLAN_OPEN_SOURCE flag is a legacy
flag which had a specific use that is no longer valid. So replace the
use of WLAN_OPEN_SOURCE with a feature-specific flag.
Change-Id: I82c51efff8dfe6673c6b9d956f974cae2d21bb69
CRs-Fixed: 3464911
Update roam trigger sub-reason for common roam
and wlan diag event need update to user space.
Change-Id: I66733736d9148e3748c653d4b43a1aa6d2f438cf
CRs-Fixed: 3459385
Add a new MSD duration subfield that holds duration value
in the units of 32us. Deprecate the old subfield msd_dur_us
that holds the duration value in microseconds.
Change-Id: Id4789c550778d901cb519e53e350cc9fc66611e7
CRs-Fixed: 3446377
After receiving WMI service ready ext2 event and htt msdu index to
qtype map is derived, call CDP API to evaluate whether TX ILP can be
supported or not, update the TX ILP capability to DP, also send WMI
INIT CMD to FW to notify if host has enabled the TX ILP support or
not.
Change-Id: I472ebc5c7fa4b2996b790b58274fa3c048f6d7f9
CRs-Fixed: 3447519
Extract htt_msdu_idx_to_qtype_map array from wmi service ready
ext2 event, it is needed for DP TX ILP feature enablement.
Change-Id: I64766f5b6ebc6632ce4994a8d53224d98beb5879
CRs-Fixed: 3445507
Add gActionOUIDisableDynamicQosNullTxRate to control FW's dynamic qos
null tx rate feature.
Some APs sometimes don't honor Qos null frames with some specific rate.
This ini will disable dynamic qos null tx rate feature for specified
APs.
Change-Id: I7f76d19be6f4714166bf5761b43c7c9c7d041308
CRs-Fixed: 3451330
Add new params(ul_tid_bitmap & dl_tid_bitmap) for rTWT invite sta cmd.
This will be sent from test command to trigger invite sta.
Change-Id: I843badeb5e826ded5ab4f8083448b2b7fc4c3486
CRs-Fixed: 3456956
Currently, NDP_END_REQ TLV does not requires vdev id to send to
firmware as firmware maps the NDP session with instance id.
But in some cases, (such as testcase to valid NDP end request on
the vdev id), host needs to send vdev id also in NDP_END_Req.
So, to fix this, in NDP end req TLV, add vdev id with validity
flag to check vdev id is valid or not.
Change-Id: I23e7b1d4ce01ae87c37567f6f01adda38bf18fb6
CRs-Fixed: 3454796
Add new roam failure reason code for no ap found and final
beacon miss sent and reason code for no candidate found
and final beacon miss sent
Change-Id: I4c4813efdedd30bd65c7baf0110c292c5ae3573c
CRs-Fixed: 3437119
New TLVs for MLO link state information is introduced for
get link info command. Add WMI changes to add these TLV in
get link info command
Change-Id: Ib8d12a727ac6f59257dcce69174271330a065c77
CRs-Fixed: 3431076
This change is to populate wmi service for 11az TBR rsta.
Also, this adds host based enum id for corresponding wmi service.
Change-Id: I9687855651bff222616adb3a8cf346e6264688ee
CRs-Fixed: 3437035
Since special vendor roam log is not need for common roam,
add flag to filter the log.
Change-Id: Ide67de16ae68c507a7b4e81672cbf5e0fc0e4c5d
CRs-Fixed: 3442621
Add support for WMI_CSA_IE_RECEIVED_EVENTID as:
1. Register the handler
2. Handler to extract the event
Change-Id: I9f476c7fbc51d9686d05fbdb5f46dec3bcd3c29e
CRs-Fixed: 3431363
Read the new service capability:
WMI_SERVICE_TDLS_CONCURRENCY_SUPPORT for TDLS concurrencies
support. With this service capability below concurrencies are
supported:
STA+TDLS+P2P
STA+TDLS+P2P+P2P
STA+TDLS+P2P+SAP
Host driver will check this capability to disable TDLS
off channel when concurrent interface comes up. If this
service cap is not advertised by the firmware then
existing TDLS connection will be teared down when concurrent
interface is started.
Change-Id: I744775080a22ca8f3bc88894c349916eea27fd3a
CRs-Fixed: 3414266
Add new params(ul_tid_bitmap & dl_tid_bitmap) for rTWT remove sta cmd.
This will be sent from test command to trigger remove sta.
Change-Id: Id68c020a18e3e418ad6605f27827ab755f8eea53
CRs-Fixed: 3431178
Currently host sends WMI_REQUEST_LINK_STATS_CMDID for
SAP over WMI to fw and as fw doesn't support this command
over WMI for moselle it does forced assert.
To address this issue send WMI_REQUEST_LINK_STATS_CMDID
command over QMI to fw for moselle.
Change-Id: I03c9daee1d561d69bb5caf195f8e06ce5e4a72fc
CRs-Fixed: 3394792
Added change,
1. Define new DBR module DBR_MODULE_CBF to handle TxBF
standalone sounding CV data and corresponding ring
initialization.
2. API to extract new meta data TLV added for CV data.
3. API to handle standalone sounding complete.
Change-Id: Id28c5561bb8b3bf08de7ddd9aa2365e2ae99f1c2
CRs-Fixed: 3415627
1. Make changes to selectively send the Link control WMI to the
FW with out including the T2LM TLV.
2. Modify the TLV definitions for Link preference to use the newer
Link control TLV.
Change-Id: Id8beae8376ee5d2fb3434367530a0a6bb976597d
CRs-Fixed: 3422692
As part of 'SAP PS with TWT enabled' new
requirement add new vdev set param
wmi_vdev_param_set_sap_ps_with_twt to map host vdev
param with firmware interface new vdev set param
WMI_VDEV_PARAM_SET_SAP_PS_WITH_TWT.
Change-Id: Ia8b45ddb35657e0293cda5821b8ddc92bf68bccc
CRs-Fixed: 3421621
Add peer type for MLO bridge peer. This is a special peer
created on 4-link MLO AP to allow association of some 2-link
MLO STAs.
Change-Id: Id2073ea82582ae67cae03b813d8f7bf44fde9aff
CRs-Fixed: 3412299
Seeing kernel panic when max limit is reached for
pending WMI cmds, self-recovery is triggered that
sends a WMI cmd to crash the FW. This will not go
through and call recovery again
Change-Id: I55d025ac4fbf8b18ac441a135d10d558b2ec4d1e
CRs-Fixed: 3397524
When handling WMI_ROAM_SCAN_STATS_EVENTID,
the number of channels scanned for each roam trigger is fetched from
wmi_roam_scan_info TLV (wmi_roam_scan_info->roam_scan_channel_count),
The total number of channels for all the roam triggers is fetched from
param_buf->num_roam_scan_chan_info.
chan_idx is the index used to fetch the current channel info TLV to be
read. So if wmi_roam_scan_info->roam_scan_channel_count provided by
firmware exceeds the total param_buf->num_roam_scan_chan_info starting
from given chan_idx then OOB access of event buffer can happen.
To avoid this, validate the sum of the current chan_idx and
src_data->roam_scan_channel_count against
evt_buf->num_roam_scan_chan_info.
Change-Id: Ied94464d1f12690cf8832962b94595c2e00c33f8
CRs-Fixed: 3357714
Add API extract_tgtr2p_table_event_tlv to extract TLVs from the response
event of rate2power table update cmd. Add a wrapper function
wmi_extract_tgtr2p_table_event and call extract_tgtr2p_table_event_tlv
from it.
Add the host event id wmi_pdev_set_tgtr2p_table_eventid corresponding to
the target id WMI_PDEV_SET_TGTR2P_TABLE_EVENTID. Also add this mapping
to populate_tlv_events_id function.
Change-Id: I0a870125120f1f92ee50002953e114b27d597ae6
CRs-Fixed: 3405417
Add the function pointer 'send_set_sta_max_pwr_table_cmd'. The
corresponding function sets max tx power limit for each sta
The function pointer mentioned above calls the
send_set_sta_max_pwr_table_cmd_tlv API to fill the each STA max power
values in appropriate WMI structure and sends to the FW.
Change-Id: I62cba94645e942fb63415d81cd9c2a1f5be3f47e
CRs-Fixed: 3399241
Add 160 MHz and 320 MHz BW support for Smart Antenna.
Peer connect gets rate codes for all supported BW on connecting peer
as part of wmi_peer_ratecode_list_event. This changes add 320 MHz and
160 MHz BW support.
Change-Id: I715dd5a64c38114fef6e17c2e2f6a526e1a716c2
CRs-Fixed: 3381648
Extract the scan blanking feature support from WMI service ready
event and store it in target if data structures. Add API to check
whether scan blanking feature is supported for a given pdev.
Change-Id: I65fefbb879b8433a68338bfcd3e4f729eff3ddd8
CRs-Fixed: 3413922
Host and FW have agreement about using fixed pdev id for CFR on HMT,
which required changes on both sides. In case only picked host
change with old FW, which will case device broken during booting up,
add this change to set pdev id base on FW capability for CFR request.
Change-Id: Iac82074228d42c6f51ea2024defdb0272e5cb396
CRs-Fixed: 3409616
The FW needs mlo_flags of partner links as well during Assoc,
to handle more than 2-link MLO Association.
Extend the peer_assoc_ml_partner_links struct to pass them.
CRs-Fixed: 3403848
Change-Id: I543442ded6b5bc55c278b32f3d449eabacc49919
Add support for vdev_param_set_profile to indicate
AP profile to FW. VDEV_PARAM_XPAN_PROFILE can be used
as bit map to support other AP profiles. So, rename vdev
param VDEV_PARAM_XPAN_PROFILE to VDEV_PARAM_SET_PROFILE
to support multiple ap profiles. Bit 0 indicates XR SAP
profile is enabled or disabled and BIT 1 indicates XPAN
profile is enabled or disabled.
Change-Id: I61c434c7a4bbba013690011c0a777af199207630
CRs-Fixed: 3401468
