IID support is set from user space during boot up
which can come in parallel with AFE set clock requests
due to which param payload is set in difference with
the actual set param command as per instance id support.
Change-Id: I07e45fda0943cac814f25c16da930dfae5d209a6
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Add support for speech codec which is similar to a2dp aptx adaptive.
Change-Id: Ibfbcf086f009fdb561e26aaf92cefc92f1bd16ca
Signed-off-by: Zhou Song <zhous@codeaurora.org>
Support group tdm multi lane configuration for TDM interface.
With valid lane mask tdm interface support delivery audio channels
through different data lines.
Change-Id: I63e8ba1106b89c6bcaca0a8359a1def696c334ad
Signed-off-by: Cong Tang <congt@codeaurora.org>
Payload size validity is not checked before using it in array index.
Check payload size to avoid out-of-boundary memory.
Change-Id: Ic0b06bb331fc1753ff7543bb218ab12d6a4a3ca8
Signed-off-by: Kunlei Zhang <kunleiz@codeaurora.org>
Trigger xt logging getparam at every playback close
and store data. When app queries sys/class node, return
stored values and reset to 0 for some params as per
app requirement.
Change-Id: Ice1a3e9a7e03062390f1c36184a971635e55d450
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Implement get param for AFE_PARAM_ID_SP_RX_TMAX_XMAX_LOGGING
in order to get excursion params from DSP.
Change-Id: I5129938c51c6f6ede9d4703d13be60d04d26f5e3
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
With speaker protection in v-validation mode, speaker
samples can be tested in early factory mode. Add
support for v-validation feature from driver.
Change-Id: I92493d6d2784cf4dd58021746bffe01180f89d23
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add support to process ec at channel count other than the
playback channel count by providing ability to set downmixed
channel count and downmixing weights to be used to downmix
ec ref data obtained from playback path.
These configs would be used to explicitly configure MFC module
present in ec ref path, for usecases where ec processing cannot
be done at playback channel count due to algorithmic or resource
limitations.
Change-Id: Iaa80a0f0da3697c55751b2201578252d6466d3b5
Signed-off-by: Dhananjay Kumar <dhakumar@codeaurora.org>
When ADSP is in power collapse or island state, it would fail
to access LPASS codec register.Vote for LPASS core to avoid
LPASS power collapse with pmruntime approach while accessing
LPASS registers & TLMM.
Change-Id: I74d037e499fb6f1245b9a1bd1b0a77200608c27b
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Handle media format update events from ADSP in case of DSP loopback.
Change-Id: I4004759cc77a05f46106d359417f97f0326af19d
Signed-off-by: Ralf Herz <rherz@codeaurora.org>
Allow to mark entries in a channel map as unused to prevent mixing other
channels in that slot.
Change-Id: I06f7de932dec4d30b2d6cfe04460d07ddad89049
Signed-off-by: Ralf Herz <rherz@codeaurora.org>
Add support for Aptx Adaptive decoder. Introduce flag
to indicate ABR feedback decoder configuration to
differentiate from regular decoder configuration.
Change-Id: I272e0a9572a56e878f7ad1385514b3be7010145a
Signed-off-by: Chaithanya Krishna Bacharaju <chaithan@codeaurora.org>
FLUENCE_EF module in COPreP topology doesn't support
44.1Khz sample rate. Set sample rate to 16Khz for
VPM_TX_DM_FLUENCE_EF_COPP_TOPOLOGY, which contains
FLUENCE_EF module.
Change-Id: I527da1a70cacba1014b2a706216172d12066b909
Signed-off-by: kunleiz <kunleiz@codeaurora.org>
Add voice MHI driver to support the following features -
1. Allocate and map mailbox memory needed for voice call
packet exchange.
2. Send memory mapped addresses to ADSP.
3. Vote MHI host driver at start and stop of a voice call.
Change-Id: I8ef8bc270acacab9b80bca7addccdf73bd572adf
Signed-off-by: Vikram Panduranga <vpandura@codeaurora.org>
Add a new API for mapping DMA resources
that needs to be attached to existing
SMMU SID.
Change-Id: I7a513d24ea30a5ead318e856e4c5317743fd0021
Signed-off-by: Vikram Panduranga <vpandura@codeaurora.org>
Enhance Channel Mixer control for MultiMedia Frontends to
get custom channel mixer coefficients from userspace and
use it during device routings to control stream to device
channel mappings.
Change-Id: Ifedac25de5ae6bad1092b66ec405bba66a80f608
Signed-off-by: Cong Tang <congt@codeaurora.org>
Signed-off-by: Dhananjay Kumar <dhakumar@codeaurora.org>
VA macro on Kona has three TX codec DMA interface. The
current AFE driver only supports two codec DMA interface.
Add support to enable the third one in AFE driver.
Change-Id: Ie0f6241ef37bc03ad9adb1c4fe82f82468caec25
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
VA macro in Kona has three DMA TX ports. Add a new VA
DMA TX CPU DAI in the DSP DAI driver to use it on Kona.
Change-Id: Ic144dbed1bd63af6f0150f854fdb74d57e156839
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
BT sink devices have a limitation on the packet sizes
they can receive and handle from BT sources. AAC encoder
can produce output frames which can vary in size based on
content being encoded. If frame size exceeds MTU size of
BT sink device, it will lead to incorrect decoding of
frames in BT sink.
Add a frame configuration parameter (MTU/Peak bitrate)
for AAC encoder to solve this problem.
Change-Id: Ia7795049e982400b0b3657b0b3a8990fc6920e38
Signed-off-by: Aniket Kumar Lata <alata@codeaurora.org>
- AFE_LOOPBACK_TX BE is the dummy backend created to
establish the EC reference capture path. While
opening COPP pass playback port id instead of
AFE_LOOPBACK_TX to get reference stream data from
AFE RX port.
- Add session type support in creating new COPP and
while checking for existing COPP.
CRs-Fixed: 2080421
Change-Id: I979f3ce1009cc18ff14130bebb8bd51a78fbe5ac
Signed-off-by: Surendar Karka <skarka@codeaurora.org>
Add support to get DOA tracking monitor data.
This is required to support SVA LED display feature with
FFECNS/FFNS enabled.
Change-Id: I7e39c2f3998fcc3f9ed0767c0090f862e1ba7539
Signed-off-by: Chaithanya Krishna Bacharaju <chaithan@codeaurora.org>
Add dai driver and routing driver changes for
afe loopback BE. This BE is used to capture
EC reference data.
Change-Id: Ia57f335bde5f8a47de0030fbf1cdb784c8821e17
Signed-off-by: Surendar Karka <skarka@codeaurora.org>
Add support to enable mono mode when one TWS+ earbud is
connected. Change the encoder config when device switches from two
earbuds to single earbud.
CRs-Fixed: 2341876
Change-Id: I880aa6a2767d88e99be2d80afff0e5fbec94b8a4
Signed-off-by: Manisha Agarwal <maniagar@codeaurora.org>
snd_soc_platform_driver is removed in kernel-4.19.
Update snd_soc_platform_driver to snd_soc_component_driver.
Change-Id: I434b6fd173d1f4365a610d9164342d5d04d6c5bc
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Switch audio drivers to SPDX identifier on msm-4.19.
Change-Id: Ic3f0230a516db251b8d81e8a7e73dbc04d66fe1b
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Update SBC sample frequency and number of channels
from IPC library to set AFE port accordingly.
Change-Id: Ibca385b0fc0ba4c3122053559b1116bd4c31336d
Signed-off-by: Florian Pfister <fpfister@codeaurora.org>
Add interface functions to vote for LPASS island NPA resource
from clients.
Change-Id: I532dd697f986aca48c3125b1bab3435b890d4039
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
MDF shared memory uses different SID from other use cases.
Existing memory map function hard codes SID from audio ion.
Use separate map function for MDF to make use of proper SID
for MDF shared memory in 32bit build.
Change-Id: I0e854054ad6f58344644f3386618986eab238549
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Add different media format support in AFE decoder.
Change-Id: Icdc3884882c34236f5ab02355dfbabdd2a1becd2
Signed-off-by: Florian Pfister <fpfister@codeaurora.org>
Signed-off-by: Surendar Karka <skarka@codeaurora.org>
SMECNS_V2 module in COPreP topology doesn't support
stereo input. Update channel number to mono for
VPM_TX_VOICE_SMECNS_V2_COPP_TOPOLOGY, which contains
SMECNS_V2 module.
Change-Id: I04b971b41328f6a32bf0ff42b21496b49bb4140b
Signed-off-by: Kunlei Zhang <kunleiz@codeaurora.org>
Add configuration flag to make use of 32channel support from
QDSP6.
Change-Id: I1e491b1ec870234140e914add4f177e5351b9953
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Add support for sending APTx Adaptive encoder mode,
High Quality or Low latency to LPASS.
CRs-Fixed: 2272343
Change-Id: Ibbe809d5ca4481d3e98931e40213dd16110f6a57
Signed-off-by: Sharad Sangle <assangle@codeaurora.org>
Remove the detailed format information from each format change event as
sysfs interface is used now.
Change-Id: I6abd221e87b18c1f0e84e62db8076b8198e8ad24
Signed-off-by: Ralf Herz <rherz@codeaurora.org>
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
ASM supports now up to 32 channels. Extend
the ASM Channel map structures from 8 to 32
channels.
Change-Id: I958d15910785cf0c5707dec432b4dd3e272c3dc1
Signed-off-by: Dieter Luecking <dieterl@codeaurora.org>
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
