- make B and P frame QP controls as dynamic.
- enable I/P/B QP to fw as and when these
controls are set to the driver.
- remove HEIC qp support.
Change-Id: I7f45ab0bda75df8128bbbdfcebe66c2cae208b06
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Refine log level checking, to avoid some logs are
always printed if multiple level specified.
Change-Id: I151a5b8cce8d234d6d22450c43cf50d3b0065286
Signed-off-by: Qiwei Liu <qiweil@codeaurora.org>
Add support to dump video FW region during FW crash
using devcoredump helpers.
Change-Id: I64c47160f04644223f4e831c35f7a059d38f7d83
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Client can choose to run an encode session to acheive maximum
performance rather than maximum quality.
Add the handling to configure video core accordingly for the
configured video session.
Such configuration is only applicable for non-realtime session.
Change-Id: Ife290b377c844e5b1d3be93b2509c787f8e05c59
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Amend power on and off sequences for iris2 video hardware.
Change-Id: Icada0b95ba5990a6911803ee9fa650a296c357db
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
modify scanlines alignment for linear rgba color
format to 32.
Change-Id: Ide64322bc872bfda64d8f48474ef2d37a4f314b7
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Enable HFI_PROP_SECURE when secure session is enabled
in encoder. Same behaviour as Decoder.
Change-Id: I5edfe3d735fda8edea9e491ae17546945b4431a1
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
- To determine if session is admissible, check only the
decoder input width/height and encoder crop width/height.
- Update session MBPF Calculations.
- Amend work mode setting to consider decoder input width,
height and GOP size.
Change-Id: If4053c222de2a55ad5b85a8ab96c12c47b145aa3
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
Priority level was not determined at few sequences.
Determine the priority level and set to firmware, if
there is a change in driver and firmware priority.
Change-Id: I97861fd4ce8cfb7cf828a8da9a5ce8ba900280ef
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Currently driver prints hex values for codec type, pixel
format and port number. So added change to print strings
instead of hex values.
Removed unnecessary logs to avoid overlogging timeout
issues.
Change-Id: Ia44401990797dc20eae0a35631e9ed6a0b094c20
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
- misc fix for setting frame qp, min qp, max qp.
- seperate LEVEL database entry for encoder and
decoder as max level supported by encoder is 6_0,
but decoder supports upto 6_2.
Change-Id: Ia0a0a717e73e55a8b6933421e3eb55c3831524b2
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Currently session_error check is scattered at multiple places,
So check for session error at ioctl entry point itself(for set
type controls only).
Cleanup &inst->response_works.list as part of session close to
avoid leaks and remove unused variables from inst struct.
Change-Id: I349ec845cc71814b33a94ac07c7628304ddae564
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
qbuf will be deferred on all ports before streamon,
So explicitly queue pending buffers at the time of
streamon.
Change-Id: I673a14f0d43563184aac887f5f23b63ed13d59df
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Encoder supports downscale with scaling ratio upto 1/8 of width
and 1/8 of height. So added necessary scaling checks at streamon.
Change-Id: I3a29b43c79cf4e693ba2c0d9f98ec24410d50fbd
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Add strict check in msm_vidc_check_mbpf_supported() to
reject image session, if total image load exceeds 16K.
Added msm_vidc_print_insts_info() support to print all
running instance info, if new session is rejected due
to mbpf/mbps checks.
Change-Id: I98bab985fcf4f4d20c6f263c48e0c701ec86ab6f
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Decoder supports dynamic low latency. When client configures the
video session in low latency mode, driver would configure the
firmware such that HFI_CMD_SETTINGS_CHANGE is triggerred on
sync frame boundary.
Change-Id: Ie70eaaeb8ad420db926f0d99f77723476deee400
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
During input port streamoff, state is changed from START_INPUT
to OPEN and then sent CMD_STOP to firmware. So reverse thread
acquired the lock and trying to process IPSC. Since IPSC is
not allowed in OPEN state, driver treats that as a fatal issue
and moves inst->state to ERROR state. Added change to avoid
above mentioned issue.
Change-Id: If0e18f01b6ecac3c810c0dab878ae392c48ffc27
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Occationally when multiple sessions are waiting for firmware
response and at the same time if there was a system error
received which will deinitalize the core and remove all sessions
from core list. If client opened new session which will initialize
the core and start the new session. As there will be no response
for old sessions, eventually, they will timeout and try to deinitialize
the core which will reset new session also which is not correct.
So check if timed out session is valid (present in core list) before
deintializing the core from timeout session.
This change also addresses below race condition issue -
If client is opening multiple new sessions and multiple old sessions
are also timedout at the same time and all are waiting for core lock
to be acquired. The new session does init_completion(&core->init_done);
and release core lock before waiting for completion event. As core lock
was released the timed out session will acquire the core lock and deinit
the core and release core lock. As core was deinited, another new session
will do init_completion(&core->init_done); on which the previous session
was waiting for completion event. doing init_completion again on an
already waiting completion event will result in list corruption issues.
Change-Id: I94766ead8b3ecad7d0b87f4b999608f435d0cee2
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Existing video driver expects session priority to be set
explicitly during static configuration. CAP_ROOT is not
enabled for decoders, hence explicit setting is needed.
Change-Id: Id754b38f15e9e045d31797557a4a7aa7a296346e
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
adjust MAX_MAP_OUTPUT_COUNT based on resolution
to enhance performance and reduce memory pressure.
- For 8K session: count = 20
- For 4K session: count = 32
- For 1080p session: count = 48
- For all remaining sessions: count = 64
reduce MAX_DPB_COUNT to 32.
reduce DEFAULT_MAX_HOST_BUF_COUNT to 64.
Change-Id: I0e6d25121947524b843e9cce96b75871aba174af
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Do not unmap buffers when firmware sends release
done. Only delete these buffers from release list.
Unmap buffers when removing stale entries from
mappings list.
update max dpb count to 32 and host buf count to 128.
Change-Id: I71fc3f722f068d8f2eeeb81041d4e495092c254f
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
[1] Added return type to strict_check() api and bail out if
strict_check fails.
[2] Fix all the failures with #1.
[3] Added WARN_ON() for strict_check failure.
[4] Ensured &core->lock is acquired before calling below api's.
- __write_register
- __write_register_masked
- __iface_cmdq_write_relaxed
- __suspend
- __resume
- venus_hfi_core_init
- venus_hfi_core_deinit.
Change-Id: I7f0a3ca6c2aec2758220c90bff9260367f10820b
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Add support to honor client enablement of csc custom
matrix and set csc coeff to video firmware.
Change-Id: I14d702eb7033541aa439bebe11df7fc4aa49ffdb
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
update alignment to 128 for stride in pixel
calculation for p010 color format.
Change-Id: I0fda66f06409bb9947c88a60a88a9ea8f70505a5
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
If workqueue creation fails, driver is accessing buffer lists
in session close sequence, which is not yet inited and leading
to NULL ptr dereferrence issue, while traversing uninitialized
list. So added change to avoid accessing list without init
completion.
Change-Id: Icb3aa6b7edaf27e73873ec289d6a921a2613e77e
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Deprecate custom pipe setting and use the hfi setter
to configure it alongwith other configurations.
Change-Id: Iffbd25df89f43cf77c1fa85ffa97601a31998410
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Latency property is set to firmware during streamon output port,
if set as part of initial configuration by client.
During runtime, the property is set as and when configured by
client.
1. Make the latency property dynamic for decoder.
2. For encoder, the same gets set to firmware with regular
v4l2 set properties.
3. For decoder, set the property explicitly during streamon
output port.
Change-Id: I35990614b95e57f113ddacfc2272cad6ae0dde82
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Core is moved to init state before completing full init sequence.
So subsequent new open request assumes core is already inited and
attempts to initiate a hfi_session with firmware, which is not
correct and core_init is a sync cmd, so core->lock() is released,
so that reverse thread can issue sys_init_done. But new session is
acquiring core->lock() and corroupting core->init_done.task_list
completion structure variable i.e leading to list_corruption issues.
So added change to address these issues.
Change-Id: I0b983a06b8ea58134ea93831246309c9ccbdf0d1
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Added support for V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN_10_STILL_PICTURE.
It willbe used in 10bit image encoding usecases.
Change-Id: I14877547f1f4792eefb0ea6bcecf2643627c125a
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
