Log WMI work queue call stack when WD timer expires to assist
in debugging on non slub debug enabled builds.
Change-Id: Id3dd575700ca586b0738a88ca2af88a757238d1b
CRs-Fixed: 2789114
Currently ll_stats and get_station requests are sent back to back
from user space. The firmware time difference between these two commands
results in extra sleep and wakeup for Q6.
To avoid this extra Q6 sleep and wake, send both requests in a single
command from the driver if the firmware supports that operation. Cache
the get_station results in the driver until user space request reach
to the driver.
Change-Id: I5e6f42f9e3836ef4bf61d3d9220f8cedb775cbd5
CRs-Fixed: 2778479
Add peer assoc parameter 'peer_bss_max_idle_option' to
update the peer's Max BSS Idle option cap to FW.
Change-Id: If7fd4369bade8b289655c491849562c2357de877
CRs-fixed: 2781050
Host add support to send WFA test configs to FW using WMI command
i.e. WMI_WFA_CONFIG_CMDID.
Change-Id: Id9bdec16c69a8c16cb4ce1fac87688023c768ee6
CRs-Fixed: 2772004
Firmware advertizes the capability to allocate CMEM memory for
FST via a WMI service flag; adding the support for the same.
Change-Id: Ic33bf0584f5ce4880fdfe5abe8fd4cf2a653a06e
CRs-Fixed: 2771256
Set "action" field when send WMI_THERMAL_MGMT_CMDID
to firmware. Then driver can configure the target management action
based on different customer requirement.
Change-Id: I3da5eea0d756444ede816be5cb74407863d63781
CRs-Fixed: 2767144
This records all the WMI events and commands, for all
PDEVs. Set WMI_EXT_DBG flag to enable this feature. Refer
Original Change-Id: I18e46f683e35912cad717ca3b9cc3d1885315362
Change-Id: I4c9bdfe6fdd195656ca0c01ca400eba595be24a3
CRs-Fixed: 2762266
Add sequence number to each packet queued on wmi pipe and
match it against expected sequence number in wmi completion handler.
WMI packets are consumed internally, use the skb mark field to capture
the sequence number of the wmi packet.
Change-Id: I1421e3fcff0a2b326f6d899780c773950544ef26
CRs-Fixed: 2741465
Donot block wmi command sending inside #if macro.
This change is needed because WIN uses only the FW log level
setting and not the complete feature. Only the feature
should be enclosed in #if macros and not the wmi command
sending part.
Change-Id: Ia28c0487d360c1b0a54374bb237811eba6b1af41
To show formating errors at compile time, removing Wno-format flag
while compilation of driver and also handling associated errors
Change-Id: If990cc9110fe3042dd486e31d9b44fce79861e77
Make each WMI debug log buffer size configurable through
compile time config option. Now memory constraint platforms
can use these config options. Use default values if no
values are configured.
Change-Id: Ibc924e12a56ae7d529aea91e55bcc0bbce72ac7e
CRs-Fixed: 2741465
populated fils discovery, unsolicited probe response from
vdev extension stats and populated to APSTATS.
Change-Id: I762d7f36fa45f9048cf591bde3550a415e23bdcb
Support WHUNT FW simulation feature.
Records all the WMI events and commands, for all PDEVs.
Set WMI_EXT_DBG flag to enable this.
Change-Id: I18e46f683e35912cad717ca3b9cc3d1885315362
CRs-Fixed: 2762266
Firmware expects the channel property WMI_CHAN_FLAG_NAN_DISABLED
to be set if NAN is not allowed on any channel. Firmware shall
check the flag and decides whether to enable NAN/NDP on that
channel.
Change-Id: I8e283d2cd0f83a43e04dad142b09d519ef7f0db3
CRs-Fixed: 2760348
This will help to configure desired rate mask. It can be
used to optimize link performance.
Change-Id: I15b6fbc512d9b0869a6ad6a6f24f1593abf14dae
CRs-Fixed: 2758871
This change allow Tx VDEV of MBSS mode to configured
dynamically by reset the VDEVs.
This change includes FW service bit parsing, checking
VDEV state of all VDEVs, sending MBSS information in
VDEV start command
Change-Id: I46b13629bd1c07be86b408d72c2967642ce8542e
CRs-Fixed: 2759229
To get the pmf beacon stats from firmware, host sets
WMI_REQUEST_PMF_BCN_PROTECT_STAT bit in stats_id param of
WMI_REQUEST_STATS_CMDID command. Firmware supporting pmf beacon
protection stats responds host with stats in wmi_update_stats_id
event.
Hence add support to get PMF beacon protect stats from firmware.
Change-Id: I99efd94ce5367da1312f60251ce7106997dd8bc8
CRs-Fixed: 2705084
For older targets thermal mitigation is supported for the apps.
In moselle there is a new processor wpps on which firmware runs,
this commit adds the support for the thermal client wpps.
Change-Id: Ia212cd08c000ab11d4079cc701634dd919447ae9
CRs-Fixed: 2757932
Add service bit support for channel tx and rx time in channel stats.
This service bit helps in not interpreting the default values for
tx_time and rx_time when new driver version is used with old firmware
where this tx_time and rx_time support is not present.
Change-Id: Icc7668f5842677ac6ef48176568301753e217ea7
CRs-Fixed: 2751500
To send received raw event buffer to event handler
Send without processed buffer to registered event with buffer
type WMI_RX_RAW_BUFF
Change-Id: I2a401e2e7afbfd8f32d4bd521d184ed9ddcdb264
Retrieve the max users per-PPDU supported in Uplink
and Downlink direction, from the fixed params of WMI
service ready ext2 event.
CRs-Fixed: 2747218
Change-Id: Ib9f9bd4313dd1955c607d4fe77b02e34761d1c20
Repetitive channel capture configurations usually support
16 groups to be confugured. To check if a particular group
is enabled by user, qdf_test_bit is being used here.
qdf_test_bit usually operates with uint32_t and it takes
the argument as unsigned long type. Since,
modified_in_curr_session is declared as uint16_t, and then
typecasted into unsigned long.
Change the data type of modified_in_curr_session
from uint16_t to 'unsigned long' to avoid compiler
issues.
Change-Id: Iec778dc36d5671f2cfb643c9ced1bd2a6104de2b
CRs-Fixed: 2753267
The Tlv of the hang data is reduced to 2bytes from the 4bytes
change the structure defnitions accordingly.
Change-Id: I675e4d837afa92496aeebec408ebfd90cbb7ad32
CRs-Fixed: 2753821
The driver doesn't copy the current rssi threshold for the
periodic roam scan trigger.
Copy the rssi threshold value for Periodic roam scan trigger
also.
Change-Id: I6745d5d6e011299d3fee9f89785083138b330183
CRs-Fixed: 2752991
Currently, stats over QMI features can only be disabled over build flags,
which is not flexible. Hence, add a CFG ini item to enable/disable stats
over QMI.
Change-Id: If5d57d2fc781fecc8817c2da8f61a2f7977d9c77
CRs-Fixed: 2752310
FW advertises scan radio capabilities as part of service ready
ext2 event. This is an optional TLV, presence of which indicates scan
radio support for the that pdev.
CRS-Fixed: 2746769
Change-Id: I5a0231c54375e9f00c85f0ad92839e2fa6c79f39
Special vap type is used by scan radio solutions.
Indicate special vap type to FW through
vdev create WMI command.
CRS-Fixed: 2746724
Change-Id: Ie5e4b059306c5c80d93dba0ebb4810b3e570878f
Add service ready parameter to update the capability for Preamble Puncturing
Tx support from target. Add WMI support for configuration of Punctured
band setting from Host.
Change-Id: If5714c162356c35c7c385c4596043c0bc671be9a
WMI commands are logged in hex in FW and hence log WMI CMD ID
in hex when stats request is send over QMI to assist in debugging.
Change-Id: I9ce63db30b491f26b9d6ac7ae3c98e6177452d7c
CRs-Fixed: 2733208
Save BTM BSS termination timeout value and BTM MBO assoc
retry timeout value coming from FW through
wmi_roam_trigger_reason_tlv_param tlv.
Save Blacklist reason, Source of adding AP to BL, timestamp
which indicates the time when AP added to blacklist and
Original timeout value in milli seconds when AP added to BL
coming from FW through wmi_roam_ap_info_tlv_param.
Change-Id: I0a328814e77c7d2452672f43c855d2c1b8646b66
CRs-Fixed: 2744255
Add WMI support for WMI_TWT_SESSION_STATS_EVENTID. This event
contains stats for a given TWT session.
Change-Id: Ieca2b6845fd2ec32ccdfb1021611bed07379d365
CRs-Fixed: 2609951
Extract additional params obtained from fw as part of
WMI_TWT_ADD_DIALOG_COMPLETE_EVENTID during TWT setup
Change-Id: Ic58a1da463238a748cbf2678fe0156789ebb3559
CRs-Fixed: 2737036
