Currently there is no feature capability support for ll_lt_sap
and host driver and user space assumes that support for ll_lt_sap
is always present which not always true.
This may result in unexpected behavior if firmware does not
support ll_lt_sap.
To address this issue, add a feature capability to indicate
to userspace if host driver and firmware supports ll_lt_sap.
Change-Id: I4a2cc4fdb3d48469a5b1a4be32a4e760543b16cb
CRs-Fixed: 3520969
Define a QCA vendor command to configure MLO link id to the driver on
which the TDLS discovery response frame needs to be transmitted when the
local station is connected in MLO mode. This command is configured to
the driver the prior to every TDLS discover frame transmission when the
station is connected in MLO mode. If the station is connected in non-MLO
mode this command is not configured to the driver for TDLS discovery
frame transmission.
Change-Id: I5815a604d44549cd650744e3fd8c8ca79a076dbc
CRs-Fixed: 3523774
Add a new vendor command and attributes to notify TID-to-link
mapping changes to the userspace.
Change-Id: I9210103807f89f31ddf99965098a78bb4a798665
CRs-Fixed: 3516368
Add a new vendor command and attributes to indicate STA MLD setup links
removal.
Change-Id: If5dca34fa533fa76a8a1e8af456e3c893affbba0
CRs-Fixed: 3510765
Add vendor attributes for EHT testbed STA configuration.
This includes enabling STR MLMR mode and forcing power save
on active MLO links for a defined number of beacon periods.
Change-Id: Ie1808319c9e05901a996d122cc5afeb45bc07ce5
CRs-Fixed: 3497681
Add vendor attributes related to MLO and EMLSR mode
capability configuration for EHT testbed STA. It includes
EHT OM control support and EMLSR padding delay configuration.
Also, generalise the naming of HE OMI control enumeration to
OMI control as it now consists of both HE and EHT OMI control
fields.
Change-Id: I31f4935d59356f67a8ca0f065001325bafb3474a
CRs-Fixed: 3497673
Add vendor attributes related to MLO and EMLSR mode capability
configuration for EHT DUT. This includes forcing active MLO links
and invoking EMLSR mode entry or exit.
Change-Id: Icaf4dda1a614be5fe56966b0f2f2862ac6d62fb4
CRs-Fixed: 3497684
IEEE 802.11be enables multiple links between STA and AP. Each of the
link has its own set of statistics. Add additional attributes required
to fetch link layer statistics per MLO link.
For MLO connection, per MLO link statistics will be sent with the new
attribute QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK. Also, cumulative
statistics of all the MLO links will be sent outside
QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK to be compatible with legacy user
space.
For non-MLO connection, the statistics will be sent without being nested
inside QCA_WLAN_VENDOR_ATTR_LL_STATS_MLO_LINK attribute.
Change-Id: I2abe31ad754e59c101ff79dd3ae956bc93880a33
CRs-Fixed: 3488156
Define bitmap values used by LL_STATS vendor command
and update the corresponding kernel documentation.
Change-Id: I70c86926a19907a2a1053bccbd7b316b198e1fb8
CRs-Fixed: 3488125
Currently the vendor attributes qca_wlan_vendor_attr_ll_stats_set,
qca_wlan_vendor_attr_ll_stats_clr, qca_wlan_vendor_attr_ll_stats_get and
qca_wlan_vendor_attr_ll_stats_results for LL_STATS vendor command
are not in sync with the upstream code.
So, fix the differences and match downstream code for LL_STATS vendor
command with upstream code.
Change-Id: I373470e1217f7da82bb25b40e07ed96d1b1a1d6c
CRs-Fixed: 3489509
When user space triggers a scan, the firmware aborts background scan,
and uses the roam status QCA_ROAM_FAIL_REASON_CURR_AP_STILL_OK instead
of "Invalid roam failures reason".
Change-Id: I8a6ed222342398d21d87e7d31956426f3c99cba0
CRs-Fixed: 3481633
Define a new attribute QCA_WLAN_VENDOR_ATTR_CONFIG_AP_ALLOWED_FREQ_LIST
to configure the full list of allowed frequencies for the AP operation.
The configuration is valid only from the next BSS start until the BSS is
stopped. The drivers shall filter out channels on top of this list of
channels based on regulatory or other constraints. This can be used to
specify user's choice of frequencies, allowed list of channels with
static puncturing feature, etc.
Change-Id: Ib74acf2df17d8eb0fb65febc3b3cf54c39de6fc4
CRs-Fixed: 3453682
Add a vendor feature flag for the driver to indicate support
for allowed frequency configuration in AP mode.
Change-Id: I5c4483b229fa68c89a80272ec1ae3f5a95452f6d
CRs-Fixed: 3454926
When user space triggers a scan, the firmware aborts background scan,
and uses the roam status QCA_ROAM_FAIL_REASON_CURR_AP_STILL_OK instead
of "Invalid roam failures reason".
Change-Id: If25d725f610125039a3218ec741cff233c3cb8ef
CRs-Fixed: 3473404
Add a new vendor command to trigger computation of connected channel
statistics such as channel utilization in STA mode.
Change-Id: I868a85bbbee9f9b050636789c3d7217b71164852
CRs-Fixed: 3460890
Add a new vendor command QCA_NL80211_VENDOR_SUBCMD_GET_MONITOR_MODE to
get the local packet capture status in the monitor mode. Add required
attributes to respond with status of the monitor mode. The monitor mode
can be started/configured by using the
QCA_NL80211_VENDOR_SUBCMD_SET_MONITOR_MODE subcommand.
Change-Id: I72edd46f85b545d7aecb3c704441e810db9ca711
CRs-Fixed: 3415711
Add a new vendor command and attributes to control and fetch the state
information of the MLO links affiliated with a specific interface.
This will enable user space to dynamically control the MLO links states
based on the latency, throughput and power save requirements.
Change-Id: I1ef710a6f3a1f8723bb3d1c564c0c803bfa0b587
CRs-Fixed: 3416250
Add QCA_WLAN_VENDOR_MCC_QUOTA_TYPE_LOW_LATENCY attribute
to enable/disable Multi-Channel concurrency low latency mode.
The firmware will do optimization of channel time quota for
low latency in Multi-Channel concurrency state if enabled.
Change-Id: Ibcf1ac82b2650899043ea9b61be5e1501e2d85a1
CRs-Fixed: 3409648
Add new QCA vendor attributes to configure the driver for EHT
capabilities and multi-link configuration.
Change-Id: I322a6fe112b83b3636c9383db152bfaa5dd34c14
CRs-Fixed: 3395113
Add new QCA vendor attributes to configure the driver for EHT
capabilities. These attributes are used for testing purposes.
Change-Id: Ic4ea6f5be212da423181d108c8dcae559a08a47e
CRs-Fixed: 3271502
During implementation of commit 257b119c2d87 ("QCA vendor attribute of
update roaming cached statistics info") some deficiencies were noted as
listed below, so fix them. Since these are pre-implementation changes,
no ABI breakage is introduced.
1) Change all RSSI values to be signed values.
2) Add enums for scan type and dwell type instead of documenting
their values with comments
3) Add missing QCA_ROAM_REASON_STA_KICKOUT to enum qca_roam_reason
Change-Id: I270dc1a009e36e37c83cb6298a096ed91b511df1
CRs-Fixed: 3402978
Add new AP concurrency policy QCA_WLAN_CONCURRENT_AP_POLICY_XR to
configure interface for eXtended Reality (XR) requirements.
Change-Id: I514979a9d950de9e0181dbf6d285812ef8a05126
CRs-Fixed: 3401504
Add vendor subcmd QCA_NL80211_VENDOR_SUBCMD_ROAM_STATS and attribute id
in enum qca_wlan_vendor_attr_roam_cached_stats for collecting roaming
statistics information when diagnosing roaming behavior.
Change-Id: I38fa39c2524e453335cf8281afe403a7c64c8bb4
CRs-Fixed: 3381257
Add more hang reason codes for the hang reason in the
qca_wlan_vendor_hang_reason enum.
Change-Id: Ia7f21c45d58c980219690cda390127f5d4004391
CRs-Fixed: 3380849
Add new attributes for the destination MAC address and netdev index in
SCS rule config subcommand.
Change-Id: I8298d9e0080440fce7401fb931e1af42672711cf
CRs-Fixed: 3359591
Wi-Fi Alliance specification for Automated Frequency Coordination (AFC)
system ensures that the Standard Power Wi-Fi devices can operate in 6
GHz spectrum under favorable conditions, without any interference with
the incumbent devices.
Add support for vendor command/events and corresponding
attributes to define the interface for exchanging AFC requests and
responses between the driver and a userspace application.
Change-Id: I8c894236cdb3a33f6eae5dd43879fc84f29a80dd
CRs-Fixed: 3337619
Add a new subcommand QCA_NL80211_VENDOR_SUBCMD_DOZED_AP to configure
doze mode state on an AP interface. This is also used as an event to
indicate the updated configuration. In doze mode, AP transmits
beacons at higher beacon intervals and RX is disabled.
Uses attributes defined in enum qca_wlan_vendor_attr_dozed_ap.
Change-Id: I183140f0466eb7400cc161afb8c2e295ec587f93
CRs-Fixed: 3267855
During the roam scan, if there are no desired APs found in the partial
frequency list, an immediate full scan on all the supported frequencies
is initiated as a fallback. This would include the 6 GHz PSC
frequencies. Define an attribute to allow that behavior to be modified
to include PSCs only if 6 GHz use has been detected.
Change-Id: I81eb9b20c2953e6b0dbf4138b31547db82d7397f
CRs-Fixed: 3351706
Add QCA_WLAN_VENDOR_ATTR_CONFIG_WFC_STATE vendor attribute,
Userspace uses this attribute to configure wfc state to
Driver/Firmware. Driver/Firmware uses this information to
optimize power savings, rate adaption, roaming, etc.
Change-Id: If58bd1e64216de81af6cf82eaabd740b85729eac
CRs-Fixed: 3343034
During the roam scan, if there are no desired APs found in the partial
frequency list, an immediate full scan on all the supported frequencies
is initiated as a fallback. This flag controls the frequency list
creation for full scan on the following lines.
1 - Full scan to exclude the frequencies that were already scanned by
the previous partial scan.
0 - Full scan to include all the supported frequencies irrespective of
the ones already scanned by partial scan.
Change-Id: Id48ae28e6d0e719b9db9b2e73bd76f9be1ea0b3e
CRs-Fixed: 3343567
Introduce a new attribute to configure access category
override for UDP frames of BE/BK category. Unlike, the
earlier attribute QCA_WLAN_VENDOR_ATTR_CONFIG_UDP_QOS_UPGRADE
which will override for all UDP frames, this attribute is
for overriding only for BE/BK based UDP frames.
CRs-Fixed: 3332609
Change-Id: Ife6104b97bca83653fdcac31f2c91007d1aa6f2a
Introduce a run time roam configuration for "hand off delay for RX".
This value, in milliseconds, will delay the hand off for the specified
time to receive pending RX frames from the current BSS.
Change-Id: I961109a2f9287a611ae8f4b38e2ea824ecf9c559
CRs-Fixed: 3329952
Add a new vendor subcommand
QCA_NL80211_VENDOR_SUBCMD_MLO_PEER_PRIM_NETDEV_EVENT to send notification
to application layer about primary netdev of an MLO peer association.
Also define the attributes present in this subcommand.
Change-Id: I84ba177c5d7155f627d4d3fa86c64c4f9b24951c
CRs-Fixed: 3280634
Add a new QCA vendor attribute to configure the periodic sounding for Tx
beamformer functionality.
Change-Id: I2f36f98b6665d448c07d676ff9a5fa907a980c5c
CRs-Fixed: 3328364
Add support for new vendor sub-command attributes for 320 MHz
channel width and puncturing information as part of the
external ACS.
Change-Id: Ic8181619949061794775bfe55f4afd0f408a7316
CRs-Fixed: 3323216
Add a new QCA vendor attribute
QCA_WLAN_VENDOR_ATTR_CONCURRENT_POLICY_AP_CONFIG to
QCA_NL80211_VENDOR_SUBCMD_CONCURRENT_POLICY sub command to set
the concurrency policy for AP interface.
QCA_WLAN_VENDOR_ATTR_CONCURRENT_POLICY_AP_CONFIG uses the values
defined in enum qca_wlan_concurrent_ap_policy_config to specify
concurrency policy.
Change-Id: I73931e41e469b3696f80fe8897428d4fc796ec95
CRs-Fixed: 3302865
Rename QCA_NL80211_VENDOR_SUBCMD_CONCURRENT_MULTI_STA_POLICY to
QCA_NL80211_VENDOR_SUBCMD_CONCURRENT_POLICY to allow extension
for other interface type(s). A subsequent commit will extend the
renamed definitions in a manner that is inconsistent with the
current naming.
This is a precursor for AP/P2P concurrency policy configuration
support via updated vendor command
QCA_NL80211_VENDOR_SUBCMD_CONCURRENT_POLICY.
Change-Id: I1df8e7b289a8d7f1982f5daab732a36ad013d9ca
CRs-Fixed: 3302835
Add service class id attribute
QCA_WLAN_VENDOR_ATTR_SCS_RULE_CONFIG_SERVICE_CLASS_ID in SCS rule
configuration vendor subcommand
QCA_NL80211_VENDOR_SUBCMD_SCS_RULE_CONFIG.
Change-Id: I1a1be0a1a5c65be488e36c0d078dbc6aef47838a
CRs-Fixed: 3314058
Add a new vendor sub-command to implement Spatial Reuse feature.
Userspace enables SR feature with specific configuration parameters. The
driver/firmware upon receiving the command, enables the SR feature if it
is supported by the currently connected AP. The driver may reject the
command if it cannot enable the SR with the configured parameters. The
driver sends events to userspace to indicate when SR feature is enabled
or disabled internally. Userspace can also query SR feature related
parameters and statistics from the driver/firmware as needed.
Change-Id: Ie203576d4ace691e37a1c5eea379f562bf416835
CRs-Fixed: 3298975
Add a new attribute QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_SP_START_OFFSET to
configure offset to shift start of the service period. This attribute
will be used when device supports flexible TWT. If provided, this
attribute will override QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_WAKE_TIME.
Change-Id: I1f066f328c6d0f3ca4d4bf4a94e63647d639f49d
CRs-Fixed: 3299714
Fx the following compiler error:
qca-vendor.h:5892:54: error: result of ‘1 << 31’ requires 33 bits to represent, but ‘int’ only has 32 bits [-Werror=shift-overflow=]
5892 | QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE40INTOL = 1 << 31,
This "1" needs to be marked unsigned for this case of MSB=1.
Change-Id: I27daebd07d0cbf314459254cfc5906f5e56dd4be
CRs-Fixed: 3299457
Add a new QCA vendor attribute to configure the periodic sounding for Tx
beamformer functionality.
Change-Id: Id4b75e992e22facdc58b467aaed29d9b00901fad
CRs-Fixed: 3290371
Based on the new requirement process tx and rx rate counts
from peer stats response and send these stats to user space
as part of big data stats.
Change-Id: I988f0d6cf6a3537f31433d4f57280336ab58bc38
CRs-Fixed: 3289789
Add QCA_NL80211_VENDOR_SUBCMD_GET_SAR_CAPABILITY to get various SAR
capabilities supported by the WLAN firmware to userspace. These
capabilities are usually reported by the firmware during the initial
bootup handshake with the driver. Based on these capabilities, user
space can choose proper SAR indexes.
Change-Id: I31be4bd58dc02fe82ae57f703f7db54f5a3c027e
CRs-Fixed: 3274703
