In some scenario, it is required to receive every ARP/NS packet even
it is not to solicit address itself. So add this vendor attribute
configuration to enable/disable ARP/NS offload on fly.
On some platform, if target suspend to WoW mode, APF filter will drop
such ARP/NS packet in the front, so prevent runtime suspend happen
if disable ARP/NS offload. System suspend still allow in consideration
of potential power impact.
It only support on STA/P2P-Client mode device, and this configure is
optional, while default behavior is ARP/NS offload enable. It will
restore to default behavior if interface being closed.
Change-Id: Icd49e230024bc1ce51519cd9fafee9bc9f79f382
CRs-Fixed: 3058494
Add ini support for tx_retry_multiplier and send
tx_retry_multiplier to fw as PDEV_STATS_TX_XRETRY_EXT
pdev param, so that fw can multiply the counter by the
percentage provided by user.
Change-Id: Ie2f06dc3aaa4a161a451b68abd085cc1537eb468
CRs-Fixed: 3066799
In cm_roam_trigger_info_event, fw_timestamp is not copied to
wlan_log_record.
Add changes to copy fw_timestamp to wlan_log_record in
cm_roam_trigger_info_event.
Change-Id: I8ec7796b656d716e6ab3b7613be0c1332d5c9fa0
CRs-Fixed: 3068843
Add self bss roam check in roam invoke cmd handler,
If ini enable_self_bss_roam is 0, don't permit to roam
to current connected bss, just keep current connection.
Change-Id: I7fe724e26d15bcc008957829e4e3384c60b58773
CRs-Fixed: 3069587
This change sends the new wow event in the bitmap to FW only
when the roam stats suspend mode attribute is enabled from the
user space.
Also, the new wow reason is added to wake up the host while
sending the roam event stats.
Change-Id: Iaefb229929e8791870f33bf787487f7c20daf218
CRs-Fixed: 3050830
In cm_roam_scan_info_event, qdf_mem_copy is performed with
different sizes.
Fix is to assign frequency values instead of mem copy.
Change-Id: Ie7dc4eaf4d7c0b65100edd77d7c2306e53e2ea9b
CRs-Fixed: 3065698
This change gathers the roam event stats from the FW.
New vendor event is used to fill in the vendor attributes
whenever the roam stats are received from Firmware.
Change-Id: I9a2ddef62d26b0b68897891788733df452ac1ceb
CRs-Fixed: 3036518
Add new vendor command to enable the roam events stats from the
driver/FW in both resume and suspend mode.
New roam param is introduced to indicate the FW to enable/disable
the roam stats using the new roam set command.
Change-Id: I6d04f0946e6735613a4cf3d4361bf31052314fa0
CRs-Fixed: 3036518
Update the concurrency policy for STA mode.
For an upcoming STA connection:
1. Disallow the 2nd STA connection if multiple STA connections are
not allowed.
2. Allow the secondary MLO link when primary link is connected.
3. Disallow ML STA when ML STA/SAP is present.
4. Disallow the 3rd STA.
5. Allow for the other cases.
Change-Id: I70c41177b7a3a9aa9cbac0aaced08c6eafca2b6d
CRs-Fixed: 3012577
Cleanup WMA HWMODE and WMA HWMODE List
as the same functionality is already taken
care by policy manager
Change-Id: I5dc1342422e70737111f882013ed3a6351a85336
CRs-Fixed: 3064739
Modify policy_mgr_is_concurrency_allowed() to support
SBS concurrencies as well. For this, the following
sub functions are modified/added:
policy_mgr_allow_same_mac_diff_freq(): Check whether
different Frequencies are allowed on same MAC
policy_mgr_allow_same_mac_same_freq(): check whether
given frequency is allowed for same mac
Modify policy_mgr_allow_new_home_channel() to consider
Frequency Range of Mac instead of Operational Frequency
Band.
policy_mgr_allow_sap_go_concurrency() is also modified
to consider frequency range.
Change policy_mgr_is_5g_channel_allowed() and
policy_mgr_is_6g_channel_allowed() to allow STA on SBS
channel if SAP/Go on DFS Channel and no other active
2.4 Ghz connection.
Change-Id: Ifcd001d70e4705b33f1b7e2e3f6c296e0545eeeb
CRs-Fixed: 3052778
INI item enable_dynamic_pcie_gen_speed_switch is no longer. Hence,
delete all uses cases of it.
Change-Id: I1082620c4354bda48ebc54aae7e72e5a81c4aa94
CRs-Fixed: 3068122
If STA + STA concurrency is in DBS then irrespective of
primary interface configuration, DUT should meet below
expectations:
1. Roaming should get enabled on both the STAs interfaces.
2. Host should ensure that roaming bands are restricted to
maintain only DBS
Change-Id: Ib28cb232650893e46da0dd8e7d47d3876546a1a1
CRs-Fixed: 3056820
Update policy mgr sbs lowerband end freq
with the value received in FW Rx service ready
event.
Change-Id: I1664876765dcd5217ffce62ec81ba59b36bbaf21
CRs-Fixed: 3065151
This change fixed compilation issue when defined macro
WLAN_FEATURE_CONNECTIVITY_LOGGING but no WLAN_FEATURE_ROAM_OFFLOAD.
Change-Id: I78f58c2bcfffb66ddf9390a8d724821faa90563c
CRs-Fixed: 3066954
This change fixed compilation issue about the 64-bit division in
sdxlemur - a 32-bit architecture, which is not defined
"__aeabi_uldivmod" for the 32-bit architecture.
Change-Id: Ief75e7903fe301f5641fa4f734dc8129a7501b7e
CRs-Fixed: 3067887
For the WTC BTM roam trigger, BTM response is not printed.
So print the BTM response logs for WTC BTM frame also.
Change-Id: I679697ec08a42a862c251175261162bc95206d03
CRs-Fixed: 3062727
Along with 11BE feature macro, check for Kernel 11be macro to avoid
compilation issues when kernel doesn't support 11be.
Change-Id: I9fb84b6263cbdca4cde93e3a581acdbfe0fe2b34
CRs-Fixed: 3066175
The RF test mode cfg item is kept as 1 by default and no action is required
during init if it is set.
Change-Id: Ieb561fb81f77470c45df46ee2319ff51c05df742
CRs-Fixed: 3056554
Firmware might send NDP peer indication/NDP responder response
while NDI deletion is in progress. Currently, NDP peer entry
gets added though vdev is moved to DOWN state and cleanup is
in progress. This leads to stale peer entry on that NDI vdev
and doesn't allow vdev delete when IFF_DOWN comes, as a peer
is present.
Check the vdev state before creating peer for NDP and skip
peer creation if NDI vdev is not in UP state(which indicates
that the vdev down is happening).
Also, don't process the NDP confirm if NDP peer is not created.
Change-Id: I73e79cc33b1a294e3f4a4a6e2f371033862c5709
CRs-Fixed: 3061756
While logging, scoring info freq param is not updated.
Fix is to add freq info in the log record sent to supplicant.
Change-Id: Id3c0d154e245376f494970c99589db0c3d37f7ac
CRs-Fixed: 3065693
When ADDROAMSCANFREQUENCIES is received, the specific channel
list is not flushed in the driver. This causes the static
channel list to be sent to firmware.
Flush the specific channel list when the ADDROAMSCANFREQUENCIES
command is received.
Change-Id: Id0422f9c5a4b10530fecc309a78cedf9adbc43af
CRs-Fixed: 3063734
Add Ini to Disable/Enable SBS.
Also, if INI is set then only set
the fw mode config bit corresponding
to SBS.
Change-Id: I839990dcd9bd2daf3df2c64abe5fa74a99c73051
CRs-Fixed: 3065084
In STA+STA case, if SSR happens, driver will clear the
no_of_active_sessions = 0 at the beginning of wlan shutdown
by policy_mgr_clear_concurrent_session_count.
In the shutdown process, one STA will be disconnected and
in the setting PCL of second STA, the no_of_active_sessions
will be decreased to 255 from 0
in policy_mgr_store_and_del_conn_info.
Fix by move the policy_mgr_clear_concurrent_session_count
to policy mgr enable/disable.
Change-Id: I70bcc60fe3030db71376a626d6f9625fe299417d
CRs-Fixed: 3063772
When a sta is being steered, sending a deauth may interrupt the
association/EAPOL handshake on the new BSS.
Do not kickout sta if it is being steered.
Change-Id: I15dd26bca27699087cdb790de8cb95281dade385
CRs-Fixed: 3042990
Check the existing two connection are in below comibation or not
GO + GO
GO + GC
GC + GC
GO + STA
GC + STA
If the existing two connection are in above combination and third
connection comes as GO or GC or STA then check whether firmware
supports p2p-p2p concurrency or not.
if firmware supports p2p-p2p concurrency and third connection is
GO or GC or STA then only allow the third connection as GO or GC
or STA otherwise do not allow third connection as GO or GC or STA
with above combination.
Change-Id: I0c2408232e84438dc5dd8d104b75fdee126aa31f
CRs-Fixed: 3043845
2 threads blocked to wait channel_switch_complete_evt for SAP channel
switch is already in progress, qdf_event_set only woke up 1st thread
later, 2nd thread still kept blocked with hold net_dev for debug id
NET_DEV_HOLD_COUNTRY_CHANGE_UPDATE_SAP, leak happened.
Change-Id: Iad296f68aeaefe5a6b88ad6bea95cc377b2ae515
CRs-Fixed: 3061960
Based on the new NCHO requirement, allow ADDROAMSCANFREQUENCIES to add
roam scan frequencies irrespective of the roam scan control value.
Change-Id: I5742f6d590e3ec51bfb294610ede05b1935a4790
CRs-Fixed: 3046763
Host sends the EXT CAP IE based on the capability
coming from the supplicant in join request. But, after
roaming the cached join request will be freed. Therefore,
after roaming few capabilities sent by the userspace are
not saved and therefore lost in reassoc request.
Save the EXT CAP IE from the join request in the VDEV
and use the cached capability for sending Ext cap IE.
Change-Id: I71947388b4c6e9e56a5832557416d9b462de70e2
CRs-Fixed: 3038496
There is frequent output when get unexpected vendor specific action
frame. So, add this change and reduce the log level.
Change-Id: I9d832546a4436bdf7dd25cb00a7de5cce1295b31
CRs-Fixed: 3060750
Currently, target_if forwards the blacklist event to upper layers
even if there is no AP info present. This event can be dropped in
target_if to avoid accessing unallocated memory.
Change-Id: Icfaabb0a8e3304882979ffde7f5cd27fd4c8a067
CRs-Fixed: 3057424
Add support to send beacon miss disconnection logging event.
Fix the diag attribute end marker in the event table.
Change-Id: I11fc8859af383b69bcba42654fb3a2bc597fef83
CRs-Fixed: 3056266
Currently WMI_DBGLOG_TIME_STAMP_SYNC_CMDID command sent
every 1 sec causes RTPM collapse and inturn has power
impact. So to avoid this enable time of the day synchronization
only after connection/roaming.
Send WMI_DBGLOG_TIME_STAMP_SYNC_CMDID as part of RSO
start command.
Change-Id: Iee3cefe1318a6e5507a43cefb9666cc2a439fe06
CRs-Fixed: 3060762
pdev is declared in nan_enable_req after a variable-size array.
Place the pdev declaration before the array to avoid corruption
while copying contents to the buffer.
Change-Id: I92766c40909bcecaed5f1eb6e2f015447f3c8221
CRs-Fixed: 3060146
As part of target if convergence, roam stats event handling
is moved to target if from wma. BTM request logs are not
sent in the new path.
Add support for BTM request logs in connection manager.
Change-Id: Icc66c5dc608260f2a0f75c5d1a85c799195f9f3e
CRs-Fixed: 3054987
In current implementation, validation code of
SCC, MCC, DBS or SBS is repetitive for all
combinations.
Remove repetitive validation code and make
common apis for scc, mcc and dbs validation.
Change-Id: Ic88f01dd9bbcc3d5dcc3453b2c6fef030cfe0305
CRs-Fixed: 3052959
Framework disables p2p before enabling NAN as P2P+NAN concurrency
is not supported. NAN operations happens through wifihal and p2p
operations happen through wpa_supplicant which are two different
userspace components. Wifihal call to enable NAN may come to host
driver before disabling p2p through wpa_supplicant. There are high
chances for p2p scan to be in running state while NAN enable is
received. Firmware NAN state machine goes to inconsistent state
and disables NAN as p2p scan is running in such cases.
So, stop the ongoing p2p scan before enabling NAN as P2P+NAN
concurrency is not supported currently.
Also, forward the pdev to NAN component inorder to iterate through
all P2P vdevs.
Change-Id: Ibe30a5ebe90514aee4f6721cdc5476570524cad8
CRs-Fixed: 3054576
FW may experience HWDTIM mode enter and exit, if HOST can't queue
frames fast enough, this will bring 10ms latency for TX under WoW.
This change adds an indication bit to notify FW whether a TX happens
after WoW wakeup, then FW can discard HWDITM and reduce TX latency.
Change-Id: I74f7311fc0639186ee0bca711160bb8c0d5d9fb3
CRs-Fixed: 3055501
The ini gEnableWoW was designed to enable or disable both magic
pattern match and pattern byte match, but now host ignore the
magic pattern setting from the ini, always enable the magic
pattern instead.
configure magic pattern in line with ini gEnableWoW setting.
Change-Id: I309aff03de9bdbd36fe391784ba54cbfa0cad67b
CRs-Fixed: 3047199
When connect with assoc_ie has HS20_OUI_TYPE ie, hs_20_ap should
be set to true for using afterwards.
Change-Id: Id3003290473bdfa0adb0fc6471ae052e7944ab3d
CRs-Fixed: 3056979
For deauth/disassassociation RX/TX, the connectivity logging event
is sent. In this event the QCA_WLAN_VENDOR_ATTR_DIAG_STATUS_CODE,
is used to send the frame reason code. But userspace expects
QCA_WLAN_VENDOR_ATTR_DIAG_REASON_CODE attribute.
Fill QCA_WLAN_VENDOR_ATTR_DIAG_REASON_CODE instead of
QCA_WLAN_VENDOR_ATTR_DIAG_STATUS_CODE.
Change-Id: I90d58f251f0e2d4647cbde3c76d4a22779c97290
CRs-Fixed: 3054797
For SBS Frequency range, the frequency range can
be of Either Lower 5Ghz Frequency shared with
2.4Ghz Frequency or Upper 5Ghz Frequency shared
with 2.4ghz phy.
Add support for both the shares.
Change-Id: Ibf17cf155e52534e029bd596f70349faf8cc03ee
CRs-Fixed: 3056464
As part of stop modules, the deinit connectivity logging happens and
the queue, all the pointers are deinitialized. But while
initializing the write pointer the write pointer spinlock is not
acquired. This results in null pointer dereference of write_ptr
from other context.
Protect the access to the write pointer before setting it to
NULL in wlan_connectivity_logging_stop().
Change-Id: I69dc57b9e661004203f58754824496953105726f
CRs-Fixed: 3054306
In if_mgr_validate_candidate() adds SBS
check to allow a STA connection on SBS
channel when MCC is not allowed .
Change-Id: Ia8007a4beabf546ff293986124f4ef985ccaeacc
CRs-Fixed: 3052797
Roam result is printed as failure always since the
is_roam_successful flag is not passed to the
roam successful attribute to userspace. For roam
reason, the wrong attribute is used to convert the roam
sub reason from driver values to userspace values.
In WTC roam, the sub reason & vsie is not filled
from the right roam trigger TLV.
Fix the connectivity logging roam result and roam
subreason and WTC values passed to userspace.
Change-Id: Id276054868d907a801e87c1fd9cd7bb3b7c4e150
CRs-Fixed: 3051447
