On FW recovery, do not allocate a new VP and use
the existing profile to setup DS VP
Change-Id: I330613fa104c51becc1018750edf91d8055edb01
CRs-Fixed: 3427382
Add HTT changes which are specific to RHINE architecture.
Some of the changes like dedicated TX endpoint service,
fastpath implementation and few other message handling
is different in RHINE. Current change add support for
RHINE specific HTT implementation.
Change-Id: I90c2d1d66cdadc5935e6b819e3f19e635c45cb51
CRs-Fixed: 3382915
Support REO2SW ring pointer update threshold configuration,
it is helpful for PCIe utilization improvement.
timer based threshold - M: issue pointer updates when M micro
seconds has elapsed.
number based threshold - N: issue pointer updates when N entries
updates occur.
Change-Id: I49ed388520fd52e97e303d6ea9c04ced6cb5cf5f
CRs-Fixed: 3420101
Add a new counter inccorect_rdi to fisa stats to log incorrect reo
destination indications in fisa processing.
Change-Id: I785ad90ae1d36b2f6b9b1888373a29fcbd65348e
CRs-Fixed: 3426537
Do not send prerequisite htt message informing
support of Umac reset feature to firmware
if DS is enabled
Change-Id: I1272579a3079e126b81a3b324009f6f32c65a904
CRs-Fixed: 3425584
Add support to enable/disable MLO Link Peer stats through
ini and cfg80211tool enable_ol stats command
Change-Id: Id1229a149befa416d060e1b07eee150e6b295abf
CRs-Fixed: 3397721
Add support of HW Link ID in PeerMetaData.
Retrieve the HW Link ID in both Rx per packet
path and RX Error path, store it in nbuf cb.
Use the stored value from nbuf while updating
MLO peer link statistics.
Change-Id: I11596d44fe8557af568fd399d0c0a04d2b887b2a
CRs-Fixed: 3397721
1) Allocation of memory to hold MLO Link Stats
at MLD Peer level.
2) Modify the Macros to update MLO link stats.
3) Init and reset the Stats
Change-Id: Id4e9d40e212c5093159ae0c7d6316e93d19cf928
CRs-Fixed: 3397721
In RX process, driver reaps the data in the REO DST RING
by successively move the tail pointer. The problem is
that driver will move the tail pointer twice if something
wrong happens, like sanity check, which will lead to the
miss of an entry next to the abnormal entry. This issue
has existed for a long time due to the code refactoring.
Change-Id: I2c5d402f81090497a4414efbf6e7e79130ba11f5
CRs-Fixed: 3426707
During code review it was observed that dp_internal.h has several
documentation blocks that are not correctly using the kernel-doc
opening comment mark /**, so fix them.
Change-Id: Ib2f22fe1162711f1589bc829e988e202c9524d5d
CRs-Fixed: 3421603
The header file pktlog.h is a legacy remnant that doesn't provide any
value, so remove the unnecessary #include. This is a precursor to
removing the actual file.
Change-Id: I3f57b6fce39f0adebf5350badb59ce80f15db7e3
CRs-Fixed: 3420936
This change introduces new RHINE architecture specific DP files.
RHINE is new SOFTUMAC based architecture, unlike LI/BE targets
all the HW UMAC functionality will be replaced with software base
UMAC functionality. So current RHINE arch specific implementation
is aligned to softumac based implementation.
Change-Id: I70baf11130afc07c5c85437d2343d0976ce0ea0a
CRs-Fixed: 3382880
To support MLO on 4 links, update the maximum number of links that
can participate in MLO to 4.
CRs-Fixed: 3412356
Change-Id: I4e5c74e856be1b4850cc62b9700b65d3311b9b7f
Currently legacy thermal throttle level can support to
THROTTLE_LEVEL_3 at the most. Per new thermal mitigation
requirement, it's needed to add extra implementation
for TX off processing and target shutdown. So extend
throttle level to THROTTLE_LEVEL_5.
Change-Id: I87c583d2828572605ea91a6ac318a58f20054028
CRs-Fixed: 3413666
In RX and defrag path some of the code in common files will
not be used by new SOFTUMAC based platform. So placing all
the unused code under SOFTUMAC macro and for better readability
clubbing all the code at one place in source file.
Change-Id: I6ff3997a42872a25fb020898f7fb1879746fc8e6
CRs-Fixed: 3382899
Make static API's as global so that they can be used in external
architecture specific related files.
Change-Id: Ida906d5dba18cc7c87a3965addf882eecfe55e0e
CRs-Fixed: 3382927
Add HMWDS rem-addr support to delete AST WDS mac entries in
Beryllium chipsets.
Change-Id: I5623bac02b326d1d668ad5e1fdcfc3a9f8cbbb9c
CRs-Fixed: 3397961
In scenario where assoc peer soc id is different from
primary soc id, reset the soc to point to primary psoc.
Since unmap is received on primary soc, the map should
also add ast on primary soc.
Change-Id: I85c6ba72a217eb5350ccc072d56b36b111af4d58
CRs-Fixed: 3410916
Extract manual ulofdma trigger bit as part of rx ppdu stats per user
update process
Change-Id: I2a697f91e572f88a36f96085d15c90c679deaf0c
CRs-Fixed: 3418677
Enhance the SAWF UL related API's and structure definitions
to configure min_tput and max_latency parameters.
CRs-Fixed: 3398855
Change-Id: Iffe82b765e90386a21aa47016db61f953ba9a5bc
This change adds rx filter reservation, addition,
deletion anad release support for optional wifi datapath
feature. The parameters required for the rx CCE filters,
are passed to FW in the HTT message. FW responds with the
result of the request. Rx data packets matching the applied
filter parameters are routed to specific REO rings.
Change-Id: I6762912bbb2aefce940d6fa3cea4871a7c89409c
CRs-Fixed: 3401148
Currently, there is a compilation error on the
OWRT SI in the alternate code path when optional
dp feature is not enabled.
The caller wlan_ipa_wdi_init_set_opt_wifi_dp() passes an
argument of incompatible type. This change fixes the
compilation issue.
Change-Id: I1f2eecbb67bfb2ef17ee73ce2faedb85827b4bbc
CRs-Fixed: 3417214
This change adds the optional wifi datapath feature
to transfer data to and from modem via WLAN.
By using the existing path between WLAN and IPA, this
change registers new interfaces between IPA and WLAN
to reserve, add, delete and release rx filters,
which are required for setting up CCE filter rules.
These filters help to determine which packets need
to be routed to IPA specific REO rings.
Change-Id: I17c2ab77ae343f15d6b79fa02bb70ed62294089c
CRs-Fixed: 3403314
Add 160 MHz and 320 MHz BW support for Smart Antenna.
Peer connect gets rate codes for all supported BW on connecting peer
as part of wmi_peer_ratecode_list_event. This changes add 320 MHz and
160 MHz BW support.
Change-Id: I715dd5a64c38114fef6e17c2e2f6a526e1a716c2
CRs-Fixed: 3381648
Currently, hardware supports checksum offload for only ipv4, tcpv4/v6 and
udpv4/v6 packets. But driver sets checksum as CHECKSUM_UNNECESSARY for
all rx packets if tcp_udp_err and ip_err bit in rx_attention_tlv is not
set. If driver sets CHECKSUM_UNNECESSARY in skb then network stack will
not validate checksum and will reply to even wrong checksum packets
which is incorrect.
So, fix is to set checksum for all rx packets other than ipv4, tcpv4/v6 and
udpv4/v6 to CHECKSUM_NONE instead of CHECKSUM_UNNECESSARY so that network
stack validates checksum.
Change-Id: Ifb9c74fb729361da6db715fa667f926b71ce948f
CRs-Fixed: 3378925
For WDS ext use fr_ds and to_ds fields to check for
4-addr instead of reading value from TLV
Change-Id: I261746018de2320367e8650332a5c355edfb1489
CRs-Fixed: 3410639
This change will hold the PCIe in L0 state for the
duration of this feature. The hold will be
released after data transfer is complete.
Change-Id: I762bc3423059ad641bdd00ac5b301a1e1b16f6c2
CRs-Fixed: 3406490
In the case of MLO connection, MLD address is used for data
transmissions in the ethernet header. Take MLO-SAP intra-bss
forwarding as an instance, ref1 sends unicast arp-resp to
ref2 who initiates broadcast arp-req. DA and SA in the ethernet
header are both MLD mac addresses of ref1 and ref2.
Currently when WLAN IPA component does the intra-bss forwarding
check, MLO connection is not taken into consideration, where
only legacy hash table is searched. For a MLD peer, it is not
added into the legacy hash table but the MLD specific hash
table.
Hence in this change, use dp_peer_hash_find_wrapper() API with
CDP_WILD_PEER_TYPE to check if peer exists in both legacy
and MLD hash table.
Change-Id: Ifea7cd37373e1575d811bedefb602d0df5c1765b
CRs-Fixed: 3400280
Adding MLO timestamp offset reported from firmware to tsf time for
radiotap header populated in tx monitor.
Change-Id: I44f2c1a49d4d2b73ac9117319b72ba8635cb5b38
CRs-Fixed: 3398345
Changes to cdp layer to support optional
wifi datapath feature.Add cce_super_rule_setup fn
to pass filter tuple from ipa layer to htt layer.
Also add support to send wmi commands to enable/disable
low power features like IMPS, BMPS and ILP.
Change-Id: Ie7e5ec2066977e4fce37f08bb5e0137327f0728a
CRs-Fixed: 3403426
WIN and MCC shared a common definition od qdf_nbuf_cb
considering that there are various fields which are
not common it is decided to have 2 different definitions
for WIN and MCC. in case of WIN he per pkt cycles will
be significantly reduced in RX path.
CRs-Fixed: 3257879
Change-Id: I5d3fa7c91592afb905702f2dca49972be89664e3
Reuse the tx descriptors released in tx completions
without releasing the associated skbs to reduce
the cpu utilization in direct switch mode.
Change-Id: I4ab3ac58977a626344877b8a818a4dbc4864aaf3
CRs-Fixed: 3393968
