While generating the scan entry for TX VAP, the decision to
strip MBSSID IE from the TX VAP beacon, will be taken if the
platform supports 11BE.
CRs-Fixed: 3300515
Change-Id: Ie45da7a02a2811172b2403d5fd1bc4b9271432d5
- target_if layer was calling UMAC layer wifi_pos_get_rx_ops(). This was
leading to compilation errror in WIN platform. Hence, added target_if
layer API target_if_wifi_pos_get_rx_ops().
- WMI_RX_SERIALIZER_CTX is used to register PASN peer create and delete.
WIN platform does not use the above context. Hence, use WMI_RX_UMAC_CTX
for WIN and WMI_RX_SERIALIZER_CTX for MCC.
- WIFI_POS rx_ops callbacks are registered in target_if layer. But, these
callbacks are called by UMAC component. Hence, move this registration
function to UMAC layer.
- Add an API to convert host PASN peer type value to target defined value.
Change-Id: I2a262121f959c2343e88158b94468d104b9e164c
CRs-Fixed: 3289852
Any error during ext/ext2 processing should stop normal init
path and return error. Without this, wrong values are passed
to firmware in WMI init which result in firmware assert.
Add proper handling to take care of failures during svc ready
message processing
Change-Id: Id22714a983d1dc2fe7300a178933cd05bf870a55
CRs-Fixed: 3290131
Adding feature flag for Health Monitor so that it can be disabled
for 16M and 256M profiles
CRs-Fixed: 3277434
Change-Id: Ibbbe582acd15ebff7e189fcbaa36429ea519db37
Add infra to support Dedicated Bluetooth Antenna Mode (DBAM)
feature. It is used to switch between dedicated antenna for
BT and shared antenna for WLAN and BT.
Change-Id: I21688093674ef9b63ee811df9168a31bd71c56b5
CRs-Fixed: 3239895
Fix TWT configuration for 2.4 GHz PHYB mode MAC.
Change is macro protected. Wlan resource config sets twt_ap_pdev_count
to number of Radios per psoc. But for 2.4 GHz vap coming up in PHYB
mode needs the value 2 if only one radio is enabled per psoc. WAR is
done from host driver to enabled TWT certification process. Actual fix
must be done from Firmware code.
Change-Id: Id29692097ee555c94c54f53d7540eb108fbe98e0
CRs-Fixed: 3238210
Add support to manage Wifi pos vdev private object. Add new peer
type in enum wlan_peer_type. Add rx_ops and register the rx_ops
for PASN peer create/peer delete request.
Register 11az PASN related WMI events in target if.
Change-Id: I2a5e4d8d7c9b9562d9ab02b287957e93ee6f4758
CRs-Fixed: 3154521
1. Since peer id is reused for reconnection in MLO case,
old entries for queue desc addr is cleared. Clear the reo
internal storage and reset it back on client connection.
2. Send Qref feature WMI cmd to FW to enable the feature.
Change-Id: I6705ce121c8c25d9a2ace039dab21312fa5ea4b1
CRs-Fixed: 3156642
Remove Legacy Qwrap max client mode code as part of Legacy
RE code cleanup. Old change (same code changes as new) was
reverted as some PF checks were missing/skipped before merge
due to an IT issue
Safe to merge now as IT issue has been resolved and all PF
checks are enabled again before merge.
Change-Id: I2f6ae57a27d50c31115d89e57281dc1f7094d71d
CRs-Fixed: 3125196
Trigger MLO teardown and wait for response before proceeding with soc
power down.
Change-Id: Ie1d00408862459b0e5240ef3151a0d969ab65e80
CRs-Fixed: 3102143
Skip sending triggers for MLO setup if a soc is not mlo capable to avoid
inconsistent MLO setup exchange with target.
Change-Id: Ie17dcd03e2fcf778795d964a55e4a400adacfb33
CRs-Fixed: 3100309
Add support for extracting SBS Lower Band
End freq from rx service ready event.
Change-Id: I402d7519507fbce733a000a546473aa00e8844d5
CRs-Fixed: 3065158
In dfs test mode, bandwidth detection test on dfs channel fails
with QCN7605 chip, reason is some pulses will be discarded due to
low rssi reported on some frequency channel, it's different halphy
design for QCN7605 chip, so need to define rp_rssithresh for QCN7605
chip to different value.
Fix is define rp_rssithresh for QCN7605 chip to different value for
FCC/ETSI/JP W56 table which are used for dfs certification.
Change-Id: I9132cf82e6d8d97f83ebb4cd8586f8d8ff48066e
CRs-Fixed: 2986947
hw_link_id is unique across psoc to identify pdev in multi-soc ML cases.
Exract hw_link_id from mac_phy_cap and provide APIs in target_if to set
and get this for pdev
Change-Id: I9dcc4c1e4b515e83151ca88f5f026c0dd0b04646
CRs-Fixed: 3023496
With latest architecture there are different HTT peer
data versions supported by the firmware, supported htt peer
version will be sent in the service ready and need to feedback
to the firmware in the init command.
Change-Id: Icd0470843198387cd7e0192cbe3821d45ef0534e
CRs-Fixed: 3008706
Add TWT service bit capability support to check whether firmware
supports ack event or not. If firmware doesn't support ack event
then service bit capability will become 0 and whenever TWT
command comes, host will not wait for ack event and sends command
in a legacy way.
This support is mainly added to handle new host and old firmware
combination.
Change-Id: I55d373c2e017130b58a4b332da16f0eda8f34eba
CRs-Fixed: 2987749
This reverts change-id I176b9c09106cc0d7f5cfbc474912e4a48d633ff2.
The 0 count chan avoid event is used to clear all previous reported
chan avoid freq range, so it can't be skipped.
Change-Id: Ie01d88c353a7f71bbee70ae67f54147ea147f6d4
CRs-Fixed: 2970061
Updated the EHT related variables as per latest fw cmn headers.
Address review comments from previous EHT gerrits.
Change-Id: I67cd58a4efcf3e06d2ca3b5570432593b1d80825
CRs-Fixed: 2902607
EHT capapilities will be received as part of ext2 service ready message.
Update the structure as per firmware common header file and extract the
EHT capabilities field.
Change-Id: Id2dd170db4de588008742f95493d4d06a6431f1c
CRs-Fixed: 2857802
Add check to drop the avoid channel list event if the range count is 0
since it would not affect the channel list anyways.
Also, add the rate limited debug print for the target_if module.
Change-Id: I176b9c09106cc0d7f5cfbc474912e4a48d633ff2
CRs-fixed: 2909614
In order to support different power levels of 6G AP and client,
the channel list event from FW namely "REG_CHAN_LIST_CC_EVENTID"
is modified to add few parameters specific to 6GHZ devices.
Hence the existing event is replaced by REG_CHAN_LIST_CC_EVENT_EXT for
all 2G/5G/6G pdevs in FW. Therefore, after the service ready event, FW
sends the channel list for the configured country/regdomain via
REG_CHAN_LIST_CC_EVENT_EXT. This mandates that all host software need
to have the processing capability of REG_CHAN_LIST_CC_EVENT_EXT to bring
up the AP.
As there can be host software which has not yet implemented the
version of "REG_CHAN_LIST_CC_EVENT_EXT", backward compatibility is lost
if "ONLY REG_CHAN_LIST_CC_EVENT_EXT" is sent by FW.
Hence a 3 way handshake between host and FW is established.
1. FW advertises its capability of processing REG_CHAN_LIST_CC_EVENT_EXT
id via wmi service bit 'wmi_service_reg_cc_ext_event_support'.
2. If the host is capable of processing the "REG_CHAN_LIST_CC_EVENT_EXT"
event id (which is done based on registration of this event), host
sends the capability in WMI_INIT_CMDID setting a bit in host_service_flags.
3. Based on host capability advertised in WMI_INIT_CMDID, FW decides to
send the old event ("REG_CHAN_LIST_CC_EVENTID") or the new event
("REG_CHAN_LIST_CC_EVENT_EXT").
4. If there is no flag indicated by host to FW in WMI_INIT_CMDID, FW
by default sends the old event ("REG_CHAN_LIST_CC_EVENTID").
CRs-Fixed: 2876360
Change-Id: Ibe95f414ad9fff0e5641bcc6e60450ef9afe245b
For the minidump feature, the wlan_minidump_remove function
definition is modified. So, update the function parameters
accordingly at all instances of the wlan_minidump_remove function.
Change-Id: I5a346f6cdf423ece02fb08d68e4422251af54876
CRs-Fixed: 2860435
Add API to get/set the target global mode when the driver
is loaded (or) dynamically switched between modes
Change-Id: I65857ef57a17645da94301e26c0daddc30c5ad79
CRs-Fixed: 2809955
QCA6490 expects twt_ap_pdev_count 2, to bring up twt sap on 2g.
Currently twt_ap_pdev_count is derived from num of radios and is
1 in case of MCC.
Configure twt_ap_pdev_count value equal to number of phy
advertised by firmware in wmi service ready ext event, configure
under flag WLAN_TWT_AP_PDEV_COUNT_NUM_PHY if defined in kbuild
Change-Id: Ib3fa81d140b473daa253e32cde2e11aad1b78b4d
CRs-Fixed: 2786512
Retrieve the max users per-PPDU supported in Uplink
and Downlink direction, from the fixed params of WMI
service ready ext2 event.
CRs-Fixed: 2747218
Change-Id: Ib9f9bd4313dd1955c607d4fe77b02e34761d1c20
A new BDF option is added for scan radio boards to disable/enable DFS
detection. This flag is advertised to host via scan radio capabilities
TLV in ext2 service ready event. If customer sets the BDF so that DFS
need to be disabled, host skips the CAC timer and ignores the Radar
detection event. This change adds the following APIs.
1) Check given radio is a scan radio
2) DFS needs to be enabled/disabled for scan radio
CRs-Fixed: 2746779
Change-Id: Iabd34261aaa1067c7bbb76677aebcc8a3f89de43
FW advertises scan radio capabilities as part of service ready
ext2 event. This is an optional TLV, presence of which indicates scan
radio support for the that pdev.
CRS-Fixed: 2746769
Change-Id: I5a0231c54375e9f00c85f0ad92839e2fa6c79f39
To handle no-inter-band MCC scenarios for dual MAC non-DBS solutions,
add changes to detect capability at run-time based on service bits.
If the service is set then code for only intra-band MCC will be
exercised.
Change-Id: I402311fcecfd03bba67fedfb2b52f779f60b81ce
CRS-Fixed: 2730374
Set preferred HW mode by default to HW_MODE_DETECT or HW_MODE_MAX
based on target type, also update preferred hw mode and num_band_to_mac
accordingly.
Change-Id: Iab231b182b54af15d09714e6cf3426c145d4ac3c
CRs-Fixed: 2711504
