Adding feature flag for Health Monitor so that it can be disabled
for 16M and 256M profiles
CRs-Fixed: 3277434
Change-Id: Ibbbe582acd15ebff7e189fcbaa36429ea519db37
FW-Host Handshake for BANG_RADAR_320_SUPPORT
1. FW advertises its capability of processing BANG_RADAR_320_SUPPORT
id via wmi service bit 'wmi_service_bang_radar_320_support'.
2. If the host is capable of processing the "BANG_RADAR_320_SUPPORT"
event id, host sends the capability in WMI_INIT_CMDID setting a bit in
host_service_flags
Change-Id: Ia26a7b8e8ee78aceb801d0053770379bd6d5a9cb
CRs-Fixed: 3270525
Call UMAC reset initialization API from soc_attach_target().
FW exposes a service bit for this feature, use that to conditionally
enable this feature. Also, add default log levels for this feature.
CRs-Fixed: 3253464
Change-Id: Ia7c9cf07a7ab7b000ebe452ab074a82173b70129
Extract EML and MLD Capabilities from Target via
wmi_service_ready_ext2_event. These values can be
used while advertising EML and MLD Capabilities.
Add helper function to get EML related delays in
Micro Secs from values got from EML and MLD advertisments.
Send EML Capabilities received from node to Target
via WMI_PEER_ASSOC.
CRs-Fixed: 3225495
Change-Id: Ibfa2ff8dbf11d4293125331376a7986e611d5f63
Firmware advertises WMI_SERVICE_DELETE_ALL_PEER_SUPPORT
capability to indicate vdev peer delete all command support.
PASN peer relies on the WMI_VDEV_DELETE_ALL_PEER_CMDID
command to delete the PASN peers before vdev delete.
So allow PASN peer create only on targets that advertise
WMI_SERVICE_DELETE_ALL_PEER_SUPPORT.
Change-Id: Ib94d9e14e34dd1e5c25bf6946e0d59fe83fd6dd3
CRs-Fixed: 3229438
Add change to fetch and save the WMI service capability
bit of FW to support vendor handoff control feature
using service bit.
Change-Id: I6bc85f2807032bf84d391f34c814c91de906ab42
CRs-Fixed: 3225147
Set/Get the management Rx REO feature capability to psoc
using the correct APIs.
CRs-Fixed: 3201829
Change-Id: Id925be4a6930a1a3ec05bfdd67ef6518a5cb2cea
Set num_max_active_vdevs to WMI init command and
extract it from WMI ready event.
Change-Id: I6d6377c03214fcab74c675839f136301ebf27834
CRs-Fixed: 3183010
Add init sequence handling to support AFC device deployment type
Set AFC device deployment type to regulatory private obj
Change-Id: Ib041d2010552412aaaa41395915d948aa2ea2bba
CRs-Fixed: 3190288
Add change to fetch and save the WMI service capability
bit of FW to support multi-client low latency feature
using service bit.
Change-Id: Ifce82c06fc913668949ed06634da1eebcea80397
CRs-Fixed: 3180932
Firmware advertises per candidate roam frame capability to
indicate:
1. Firmware sends auth/assoc frames for each candidate to
which roaming was attempted.
2. Fill the frame info TLV with authentication algo = 3
for authentication frames.
Add support for the roam per candidate frame info capability
Change-Id: I95c23031ab0fbc21fb9d8db3bd54004e4d1ac234
CRs-Fixed: 3172311
1. Since peer id is reused for reconnection in MLO case,
old entries for queue desc addr is cleared. Clear the reo
internal storage and reset it back on client connection.
2. Send Qref feature WMI cmd to FW to enable the feature.
Change-Id: I6705ce121c8c25d9a2ace039dab21312fa5ea4b1
CRs-Fixed: 3156642
Validate the MLO HW link related info obtained from the global shared
memory arena of management Rx reorder feature.
CRs-Fixed: 3111549
Change-Id: I6fd7812dc49bfa8428b2ffbf66ae978592734bc0
Add support to set 11az ext feature flags
Read the firmware capability for 11az features and
advertise the corresponding wiphy flags.
Change-Id: I85f6cc2f65a5d9892830f66a726cffc823093bca
CRs-Fixed: 3150584
Changes to add chip crash info in global shared mem arena
and expose the respective APIs to qca_ol.
Also add APIs to process global link info tlvs in order
to offset to crash info.
CRs-Fixed: 3121465
Change-Id: Idabf9fb8d4755bdd755897b3c09d2e28259a6f46
Changes to move the global shared memory arena init deinit
APIs from MGMT RX REO cmponent to MLO component.
CRs-Fixed: 3121467
Change-Id: Ie5ca50780ffb3343d225b6cf6acfa569463d5a3e
Add support for EHT PPE threshold's. Store 2G and 5G thresholds received
in service ready. Fill peer PPE thresholds for EHT peer.
Change-Id: Id5c8310cbf34c59a3d88072b37ce3f871354ed17
CRs-Fixed: 3128586
Remove Legacy Qwrap max client mode code as part of Legacy
RE code cleanup. Old change (same code changes as new) was
reverted as some PF checks were missing/skipped before merge
due to an IT issue
Safe to merge now as IT issue has been resolved and all PF
checks are enabled again before merge.
Change-Id: I2f6ae57a27d50c31115d89e57281dc1f7094d71d
CRs-Fixed: 3125196
Add change to fetch and save the WMI service capability of FW to
support multi AST delete using service bit.
Change-Id: I038073085dca1370bafe691b6b0ba8c4476be7a2
CRs-Fixed: 3118892
MLO setup trigger is required to trigger setup sequence with FW. Move it
to end of the function to ensure that it is always called and skipped
due to goto
Change-Id: I49d096f6e9c4ae0d9ad0de5e1ab32eaaaa3fee2e
CRs-Fixed: 3124260
Firmware advertises the service capability bit
WMI_SERVICE_PNO_SCAN_CONFIG_PER_CHANNEL when it supports per
channel scan config flags. Get this and cache in psoc.
If firmware supports WMI_SERVICE_PNO_SCAN_CONFIG_PER_CHANNEL,
it uses the upper-12 bits(bit-20 to bit 32) of channel_list
for flags and lower 20-bits(bit-0 to bit-19) for frequency.
If firmware doesn't support it, then channel_list holds the
frequency value only. Fill the flags and frequency accordingly.
Change-Id: I30d36a3c164e23cf0395129e5b93d186b81aa8a6
Crs-Fixed: 3103921
Skip sending triggers for MLO setup if a soc is not mlo capable to avoid
inconsistent MLO setup exchange with target.
Change-Id: Ie17dcd03e2fcf778795d964a55e4a400adacfb33
CRs-Fixed: 3100309
During driver load, print FW CRM sub ID value received in service
ready ext event.
Change-Id: I710508c9c12a476690e0379938c30c916293620f
CRs-Fixed: 3067102
Add support for extracting SBS Lower Band
End freq from rx service ready event.
Change-Id: I402d7519507fbce733a000a546473aa00e8844d5
CRs-Fixed: 3065158
Export symbols("mlo_glb_h_shmem_arena_ctx_init" and
"mlo_glb_h_shmem_arena_ctx_deinit") for other modules.
CRs-Fixed: 3026023
Change-Id: I2a7c55f119be531b495a0f42a9b058734feb0ebb
There is a requirement to use REGDMN and wireless modes in UMAC layer of
the cmndev component. As the WMI_HOST_REGDMN modes currently are defined in
WMI layer, we can't use them directly in the UMAC layer. Hence move them
to the reg_services_public_struct.h and rename them as HOST_REGDMN modes.
Replace all WMI_HOST_REGDMN instances with HOST_REGDMN. Wireless modes are
currently defined in WIN component, use them to cmndev component.
CRs-Fixed: 3044590
Change-Id: Iee5fa1745a1a44b834334746b10bdbb6f6563a0a
Expose the following APIs from MLO global shared memory handling
- APIs required by the REO logic
- APIs required to invoke the MLO global shared memory parsing
Change-Id: Ia2fb0b0fee5d3904bae8cd70ce3364360d5ea16e
CRs-Fixed: 3014343
MLO global shared memory arena contains MGMT Rx REO snapshots in the
form of TLVs. Parse the shared memory and store the address of these
snapshots. These addresses will be required by the MGMT Rx REO algorithm.
CRs-Fixed: 3035491
Change-Id: Ica1b72cd8cf4083acdeefaee41df0da4a1f57f4f
Fetch fw capability to support p2p+p2p concurrency and
store cap info in 29th bit of soc_fw_ext_caps.
Change-Id: Id8e4c0310f8db503a2997e8aed5a6f1ce813dcc7
CRs-Fixed: 3032068
hw_link_id is unique across psoc to identify pdev in multi-soc ML cases.
Exract hw_link_id from mac_phy_cap and provide APIs in target_if to set
and get this for pdev
Change-Id: I9dcc4c1e4b515e83151ca88f5f026c0dd0b04646
CRs-Fixed: 3023496
With latest architecture there are different HTT peer
data versions supported by the firmware, supported htt peer
version will be sent in the service ready and need to feedback
to the firmware in the init command.
Change-Id: Icd0470843198387cd7e0192cbe3821d45ef0534e
CRs-Fixed: 3008706
Add storage for EHT mac and phy capabilities as
per 11be D1.0 and update the EHT mac and phy capability
sizes.
Change-Id: I67224b35b701235374772e9975375e695f3ed959
CRs-Fixed: 3000166
