When FW was enabling WOW, a ring HP update interrupt is seen
which led to fw crash.
This change records any PCI writes that went through during
runtime suspend from host.
Change-Id: I3c44760ebaf49a131b483813522fe3e451957215
CRs-Fixed: 3280166
For Beryllium LMAC rings, hal_get_srng_ring_id() provides the ring IDs
separately per each LMAC only if that LMAC ring is a destination ring
(This is done to use a common source ring for the DMAC rings).
But the ring IDs for LMAC source rings like DIR_BUF_RX_SRC_DMA_RING are not
being provided separately per LMAC. As a result, these ring IDs in
split-PHY mode are colliding for the 2 LMACs.
Fix this by doing the following.
- Mark the DMAC common rings within the LMAC rings.
- Provide ring ID separately per each LMAC if the ring is an LMAC ring
but not a DMAC common ring.
Change-Id: Ifdae085b5784a03763abfc4edb42d94593e3ea21
CRs-Fixed: 3282702
set register WCSS_UMAC_REO_R0_MISC_CTL 6th bit to 1
to enable reo wref from fw side.
Change-Id: Ib8d4a2f6e7f598d45ba2b2c628ed6f3929fc3337
CRs-Fixed: 3273558
Multiple instances of the misspelling "recevied" are present, so
replace them with the correct spelling "received."
Change-Id: Ibd7f4a136541be8aa98f5bee4db7f75af0271f53
CRs-Fixed: 3273526
Add handler to get the start of 802.11 header when
NO_PKT_HDR_TLV feature is enabled.
Change-Id: I8d0cb453221ccb56996212c616e629256422a337
CRs-Fixed: 3273441
Hal layer changes to handle Umac post reset
and post reset complete events from firmware.
Change-Id: Ib25427930aab25650731c87b38e2ef7e47ae98d9
CRs-Fixed: 3267222
This is a new FAST TX API which avoids various checks.
This API will be called when SFE tags a pkt as fast_forwarded
and vap's fast_tx flag is set.
avoid additional re-checks in the wifi TX function
CRs-Fixed: 3218650
Change-Id: Iba17ede59652a1ff2af553f57de21dc58946298e
Use WLAN_CONFIG_TX_DELAY to enable HW Tx delay for both
SAWF and non-SAWF stats.
Change-Id: I6db7d386c0e3654f53398dcba1db7c5568544b0c
CRs-Fixed: 3262425
Currently there are few TLVs which are received in
the monitor status ring, but are not parsed for any
data. Since these TLVs are unhandled, it causes
excessive logging per monitor status ring entry.
To avoid such excessive logging, handle the currently
unhandled TLVs which are always received as part of
other TLVs in monitor status ring.
Change-Id: Idbe5a25e926a088adacaf5dfb892aff5885f8576
CRs-Fixed: 3266650
Add HW, SW and nbuf prefetch support in Berryllium, this will
ensure we have prefetched the HW desc, SW desc and nbuf by
the time we are in the 3rd iteration of the dp_rx_be_process
first loop.
CRs-Fixed: 3218647
Change-Id: I27d371c5d1c9a37d61e4fc00d5eb03609fad589c
In QCN9224 fetch the peer meta data from the msdu end tlv
instead of MPDU start
Change-Id: Icd9420cd83e06abe5e54e9e05cc8cbf8d8312ae1
CRs-Fixed: 3245626
Added fix,
a. To populate response timestamp from phy timestamp.
b. Based on window type swap address1 and address2 to match the sniffer.
c. For VHT frames, increment 1 to the received nss value.
Change-Id: I68dffadb609d82e2ad2cf433fcee2a76b0be98e7
CRs-Fixed: 3235718
Smart Antenna retrieve Rx EVM info support for RX feedback collection.
Support is for Wikiki.
Change-Id: I0daa657efe1054dbcc58f9318e97be02701723e6
CRs-Fixed: 3255729
This function fails to register in the 6750 platform.
Since some old chips do not have l3 type field, the
callback function cannot be registered, so this change
solves it by recognizing whether the callback is NULL.
If it is NULL, then return an invalid vallue: 0xFFFF.
Change-Id: I47c8df5e54eeac9489010e45057e44eccdb2bf22
CRs-Fixed: 3258200
Use hal_debug_rl to limit the PN error print when lots PN
failure packets received, to avoid RX process slow down.
Change-Id: If3b008343d0cc273e4c5b718accd620c4deefeb5
CRs-Fixed: 3248037
Add support and handle tx monitor full buffer payload and
other minior fix include change of name for uniformity.
Change-Id: If401ecd5e1c6263584fa7013df672459c883ca8b
CRs-Fixed: 3215244
Change macro IPA_WDI3_RX_TWO_PIPES to IPA_WDI3_VLAN_SUPPORT to represent
the feature supported under this macro
Change-Id: Ie1e387d641052cd5690c63f0c1216f4852544605
CRs-Fixed: 3250264
1. Changes to move hal_tx_config_rbm_mapping_be function from common to
device specific as it has ppe related snippets.
2. Changes to remove all PPE related codes in QCA5332 hal code.
3. Changes to correct macros according to fw_hrs.
4. Changes to move functions with device specific Macros to header files
so that it gets compiled with respective device's FW headers and gets
correct Macros
Change-Id: I479b406f318aa42d2b1032349aaf42d95b8c18e5
CRs-Fixed: 3235966
In IPA offload, both tagged and untagged traffic cannot be handled with
a single rx pipe. Hence, add support for 2nd RX pipe for tagged and
untagged traffic respectively.
Change-Id: I77ff633327696f66df42fb592492321c1591646b
CRs-Fixed: 3226021
Skb under panic issue is seen when a packet comes via RX err path,
MSDU length read by SW is coming as 0 and leaving no space for skb_push
in buffer, data is moving beyond the head and causing the issue.
MSDU length is read by generic API which is architecture-independent,
hence the struct size for one architecture is different from another
architecture.
FIX is to get the MSDU length by architecture-specific API.
Change-Id: I5a6259034e5e06ae9ce7ba6b135b44f2849f2fd9
CRs-Fixed: 3235636
Host failed to read some of cfr elements by HAL_RX_GET
for Waikiki since their LSB is big then 32 and reading
4 bytes isn't enough. This change reads 8 bytes and then
gets cfr elements properly.
CRs-Fixed: 3241915
Change-Id: I0863f22a1cc0c5fd490ec3669ff6a97b27c66f15
To support WDS feature in IPA driver, WLAN needs
to update the ast entry for any new rx packet, and for
end-nodes connected via repeater to root.
CRs-Fixed: 3226348
Change-Id: I7383b12f18e7c70ec06499d66130667eca033131
Add support to track the high watermark for the number
of entries which are used at any given instant. This helps
in identifying if the ring size is sufficient or is being
full for certain use-cases.
Change-Id: Id3ffa52c653696699fbcfbb556a815d5f7908863
CRs-Fixed: 3235115
In some cases we need to classify frames accordinging
to l3 type. This change mainly focus on this issue.
Change-Id: I4bc49a808a02b4bc8c65f920690922045d65e739
CRs-Fixed: 3198481
-Wimplicit-fallthrough is being enabled by default. Some compilers
such as clang require the attribute instead of just a fallthrough comment.
Change-Id: Id97d026b2d90a607974cc541d0301565af423f2f
CRs-Fixed: 3218239
Currently 11be msdu rate statistic is not supported yet.
Another issue is: HW reported pkt type value 6, while host
SW defined 11be type DOT11_BE (value 5), they are not matching.
DOT11_BE value 5 is referred in monitor mode and otherwhere,
so do map and conversion in host sw side.
Change-Id: Ic5c2dd2a35cbe0ecd6430f007b6e7e02ece40998
CRs-Fixed: 3230900
a. Fix memleak issue due to RX_HDR not received for a MPDU
b. Compute appropriate packet offset for non-decapped packets
c. Add correct DMA_LEN while adding a frag to SKB.
d. Add debug stats
Change-Id: Ie946f79df94df05789220b97c159c60d608bf1b2
CRs-Fixed: 3213698
Move the function attribute to common file so that the
parsing issue due to unreferenced tcl_data_cmd can be
fixed on other targets also.
Change-Id: I40a7196926061e8d232f0f070c0ed045dafd97e2
CRs-Fixed: 3228562
This is requirement change about correcting the registers when
populate CFR elements from tlv.
Change-Id: I424a0d3ae569dae3378137b84067a30b0fa28413
CRs-Fixed: 3218220
Host failed to read some of cfr elements by HAL_RX_GET for kiwi since
their LSB is big then 32 and ready 4 bytes isn't enough. This change
reads 8 bytes and then gets cfr elements properly.
Change-Id: I7715ae7c713e2b8e15ec19a191be2f770e2971a6
CRs-Fixed: 3218274
With restructuring in HIF runtime PM module, modules are
required to register with the HIF runtime PM module. Also,
changes are done in functions of allowing and preventing
runtime PM suspend as part of restructuring.
This change registers DP, HTC and HAL internal modules
with runtime PM module and update HIF runtime PM function
calls with the restructured code of HIF runtime PM module.
Change-Id: I8899a1d3b92a90a05c5eaf4df7609f4008f739f8
CRs-Fixed: 3169372
Direct DMA source ring type has two rings where ring0 is
used for Spectral and ring1 is used for CFR. The current
hal_srng_ring_id do not have the ring_id defined for CFR,
which leads to wrong ring_id populated for TX MON feature,
which collides with CFR ring.
Fix the same by defining ring_id for CFR.
CRs-Fixed: 3220401
Change-Id: I778cea533a1907ae6cd94f63734ca6c967891b9d
