Update value of new ini for separate iface support for NAN
"nan_separate_iface_support" to fw through a command
WMI_INIT_CMDID.
Change-Id: I55830e0d16d86ee5a0bfa7d3e44c6309c0d3d54b
CRs-Fixed: 2612010
Currently, the driver rejects the roam stats event if any of the
roam trigger or roam scan or roam results tlv is not present.
Now the firmware will send neighbor report immediately after the
neighbor report response is received from AP instead of buffering
it as done before.
So do not parse the roam trigger, roam scan, roam result tlv if
the tlv is not present. Add new flag in the tlv parsing structure
if the TLV is not present.
Change-Id: I366d8853f7f45dcdac6d4aa5c3a8a12a8b602a4f
CRs-Fixed: 2610377
Add support to fallback the PMKID generation from firmware to
wpa_supplicant.
Firmware fallbacks PMKID generation to host when FIPS enabled
due to the crypto library availability limitation.
Once the roam candidate selection is done in the firmware, it
sends the WMI_ROAM_PMKID_REQUEST_EVENTID. Once this event is
received, the host driver triggers an event to wpa_supplicant
for PMKID generation.
Change-Id: Ica00d27ce3f9f4a8f966261b38e238c389fcf05c
CRs-Fixed: 2507617
Avoid direct fw headers usage in init_deinit component since
can have functional impacts. The inclusion is done at wmi level
to fix the inconsistency of code.
Change-Id: I73cc1aac500cec041de81750b9c7654d21344e6c
CRs-Fixed: 2505399
For Genoa, the WLAN FW enables IPA by default, if the
IPA is disabled by kernel config, the IPA status is
not same between wlanhost driver and WLAN FW. So add
such info in the first WMI command to let WLAN FW knows
the IPA state from host, and do the according copy engine
initialization, otherwise, the mismatch IPA copy engine
configuration will casue the Genoa FW assert.
Change-Id: Iec2f86ffb40b296c51bee41adc0d895beb200e5c
Firmware advertises service capability bit NAN_VDEV_SUPPORT for
separate NAN vdev creation. This capability can be used to create
separate interface for NAN discovery and process corresponding
commands from userspace.
Change-Id: I4f81b354433c34e8bfe264f69e4eeaf6670f2fac
CRs-Fixed: 2592016
CFR config is passed on to FW through WMI
CFR feature code is moved into feature specific WMI file.
Change-Id: I00b57ea2ef4ec5520eb565910ac2c0a6478170e3
CRs-Fixed: 2582846
Add peer assoc parameter for 6GHz Band Capabilities information
for the corresponding FW peer assoc parameter.
Change-Id: I3bc4361e449843cf73db8426d3bd97dbcd9903ed
Add wmi resource flag to send packet capture from host
to FW. Register Offload Event Id for packet capture mode.
Change-Id: Icd9e542a517c8b267a228324b7612ddded28f182
CRs-Fixed: 2528439
Currently use of comamnd QCA_NL80211_VENDOR_SUBCMD_OEM_DATA
is to pass data blobs from Application to FW but there is
no mechanism to send the data blobs from FW to Application.
To meet the above requirement update the usage of existing
OEM DATA command to use it as a vendor event as well to
send data blob from host to Application.
Change-Id: I8df98f850f4dd56f55dba43c5364a52c425ba9ed
CRs-Fixed: 2573468
After every roam happens or when neighbor report is sent by the
firmware, it sends the WMI_ROAM_STATS_EVENTID to host.
Add support to handle WMI_ROAM_STATS_EVENTID event from target
after every roam.
Change-Id: I4474135ac64ebfb17109d503fbd1c3d637457a73
CRs-Fixed: 2576258
To enhance visibility of 6GHz AP, 6G only AP shall send
Fils Discovery frame periodically in one beacon interval.
Change-Id: I51487380fca10418d2260dc2612e2adcf6cbb93b
CRs-Fixed: 2562434
Add new stats_id WMI_REQUEST_MIB_STATS &
WMI_REQUEST_MIB_EXTD_STATS in WMI_REQUEST_STATS_CMDID
to retrieve MIB statistics from fw.
Change-Id: I17bccc2673d1a2ce035db04d8426bab49db80790
CRs-Fixed: 2548165
Currently the driver doesnot support the sending and receiving of the
ani level from the firmware.
Add WMI and driver framework support to fetch the ani level.
Change-Id: Ib8271a2b7f62bafb22429113fbfb405cc81379ed
CRs-Fixed: 2554677
This print is a debug measure that addresses an issue where the
HE MCS NSS Map is set to an invalid value. Although rate checks
exist already which take corrective action, this proactive print
adds information useful for addressing corner cases should
they appear.
CRs-Fixed: 2554277
Change-Id: I8e770639472409d96654dc8652ea8c9d210c4965
Add WMI changes for the API he_muedca_mode
to swicth between manual, host and FW dynamic
muedca param selection.
Change-Id: If43b5da483fe082294bda33f8951187ebc7ea3c7
CRs-Fixed: 2554378
Set WMI_PEER_INTER_BSS_PEER peer flag in the fixed param in
WMI_PEER_ASSOC to differentiate between inter-bss and intra-bss peer.
Change-Id: Ic3f54646bfcf988ce53c3d581bacea65070a5036
1) Add Spectral scan mode and agile center frequency in WMI
commands to indicate the current mode.
2) Obtain the Agile Spectral capability from the chain mask table.
CRs-Fixed: 2455967
Change-Id: I88ba6fc1ecf9b530a6b516d0c1e4ce88702c6d1f
Currently the FW expects the flag of
scan chan cmd to be set if the max BW
is filled for all the channels, which
is not set by driver.
Fix is to set the flag's 2 bit to allow
FW to use the max chanel BW.
Change-Id: Id3ce009fbd3c846713d456436c70b44a44428577
CRs-Fixed: 2550434
Add API to know whether 6ghz is supported. Also add API to know
whether an operating class is 6ghz operating class.
Change-Id: I75747502c0033e31d119e58a2254b220646bba10
CRs-Fixed: 2556998
Add support to scan for the 6GHz band capabilities
IE and parse the IE. Added peer assoc param for updating
the minimum data rate advertised by the peer in 6GHz
Opration information.
Change-Id: Iebb4379d321832f3ed2bcd3174a54843fa2d497c
If more than MAX_NUM_CHAN_PER_WMI_CMD are present, wmi buffer size can
exceed the maximum allocated buffer size. So iterate over the channel
list, and send multiple messages till channel list is empty. Also check
if 6 ghz channel is a PSC channel and mark channel flag accordingly.
Change-Id: I977a2d220c750cec1f261377b3838360bd8c0df3
CRs-Fixed: 2522763
Enable DISA WMI commands for FIPS CCM test
by moving DISA WMI code to unified tlv files.
Change-Id: I90e82fef0e7e365faa6e15d555bf4d431214e14a
CRs-Fixed: 2516897
Currently the host gets service_ready_event and service_ready_ext_event
during the init sequence as a part of handshake with firmware. As the
size of the service_ready_ext_event exceeds on adding further
parameters, new event is created.
Add support for WMI_SERVICE_READY_EXT2_EVENT to be processed after
WMI_SERVICE_READY_EXT_EVENT based on the service bit
WMI_SERVICE_EXT2_MSG.
Also add support to extract the reg db/bdf version information that
comes inside the ext2 event.
Change-Id: If0b57af362e7eb653f9189b912ec1dd3efb0f731
CRs-Fixed: 2501132
Configuration for Issue:-
DUT configuration:-
1. Configure DUT's country as US where channel 165 does
not support channel bandwidth of 40 mhz.
AP Configuration:-
1 Configure the AP in a country where channel 165
supports channel bandwidth 40MHZ.
Scenario of the issue:-
1.Connect to a diff AP on some channel x with same SSID,
and then roam to this AP.
Observation:-
The DUT would connect in 40 mhz to this AP instead of 20Mhz,
which violates the DUT's country reg rules.
Expectation:-
The DUT should re-connect only in 20Mhz on channel 165, or
only in max BW supported by reg in that country.
Issue:-
The DUT does not consider the max bandwidth allowed for the channel
in the country configured, and allow the re-association only
in the respective bandwidth.
Fix:-
Send the max BW supported by the channels in the current
reg domain to the FW so that it considers the max BW of the
channel and AP capability and then roam in the respective BW
only.
Change-Id: I977090c58e378e83cb5a3ee84a72afd018e8c428
CRs-Fixed: 2508187
If the FW sends a pktlog checksum in the FW ready event, store that in
pl_dev and use it as buf_hdr.version in the pktlog buffer header.
Also, use a new magic value to identify the checksum in the
buf_hdr.version field.
If the FW does not send the checksum, then the existing magic number
and standard version number would be maintained.
Change-Id: Ib08c093a9b54495a2c5b7e0e163207f2b1eb4ce2
CRs-Fixed: 2508828
Add cfr_enable flag in Probe response, so that FW can start CFR
capture for particular client.
Change-Id: Id38b61317384a069308de4931463f1aef4f65f38
CRs-Fixed: 2502030
Add support for OWE and SAE roam target capability.
Add event mapping for the tgt event
WMI_ROAM_PREAUTH_START_EVENTID.
Add changes to send WMI_ROAM_PREAUTH_STATUS_CMDID after
the SAE external authentication event is received.
Also for SAE/OWE/802.1x, the key management offload
needs to be enabled by default as PMKSA caching if
set_pmksa is received from the supplicant. So remove
the additional key management offload check so that
OKC and PMKSA is enabled by default for SAE and OWE.
Change-Id: I01d3a07e2ce60e25ea8624c030c6a5802205566d
CRs-Fixed: 2491042
