Add an API to support sending multiple COEX config in one WMI command.
This is to optimize and save target host to firmware WMI command
communication time.
Change-Id: Ie510ee3ebfca67a2b748c403ec52a8d7b597f676
CRs-Fixed: 3651226
When there are more than one audio transport mediums
are available, there is a possibility to switch the
audio transport medium from one medium to another
medium.
To provide this support to switch the audio transport
medium, and to indicate the status of the bearer
switch to fw, add WMI interface changes.
Change-Id: Ic9a2406e3be339b644ff8918a2a0f95705b0620b
CRs-Fixed: 3653960
Update the fixed param for UTF WMI command and event id.
Update the pdev_id in UTF command id.
Change-Id: I67d1e5698a31acd630a4c4f60410dff454999c5d
CRs-Fixed: 3648165
Add support for wmi service tid to link support.
Fw will indicate t2lm support using this bit.
CRs-Fixed: 3605468
Change-Id: I4d5f4e587da1cf362dcfaf2d89e7af176a115dcf
Register event handler for WMI_MLO_LINK_STATE_SWITCH_EVENTID.
Add target if event handler for the
WMI_MLO_LINK_STATE_SWITCH_EVENTID event, and register
corresponding mlo manager callbacks.
Add extract API for link state switch event parameters received
Call the diag event API from MLO manager post extracting the
event
Change-Id: Ib588ee87a5c37c6a34c86ce8cbf134a273c6461b
CRs-Fixed: 3610041
Implement handling of mlo sta standby csa beacon
and initiate the transmission of a link bss request
command tlv to the firmware for standby link.
Change-Id: Ibdf903c69757b47f301ab9fa7c563407915532d6
CRs-Fixed: 3605764
Extract MLO band data from roam stats event for
BTM query, BTM request and BTM response logging.
MLO Band refers to the band of the link involved
in MLO conenection.
Change-Id: Ia60821f7973fe1d39eb824a3eac7791672503084
CRs-Fixed: 3583688
Modify roam_scan_stats_tlv and roam_scan_ap_stats_tlv
to introduce mlo specific elements for Roam scan start
and Roam candidate ap logging.
Change-Id: I8e72abc3b888614faf533fd8086cf73a29c26f85
CRs-Fixed: 3582433
Firmware sends PEER_OPER_MODE_CHANGE event to host in SAP
mode when a connected client indicates upgrade/downgrade
of its bandwidth.
Host needs this data as any further SAP bandwidth
upgrade/downgrade should honor the indicated bandwidth for
that specific peer.
Change-Id: If15f491fd970486d8e84d1845866688d837ea2b4
CRs-Fixed: 3604865
Currently the T2LM timer is maintained by host.
Code change made to add support to run the T2LM timer in FW.
CRs-Fixed: 3594141
Change-Id: I7eee4800f68b07d5492a0336e3fe8e0db17d2020
Hopping radar happens on whole band, hope all DFS sub channels are put to
NOL, but F/W only reports single radar event on special freq to host.
When DFS puncture enabled, sub channel marking is enabled, host only put
single affected 20M sub channel to NOL instead of all current bonded sub
channel, AP still stays on current freq for valid puncture bitmap
instead of leave DFS freq.
If the radar is a frequency hopping radar that truly hops over entire DFS
band, then the AP and clients are best served by moving out of the DFS
band. But it could well be that only part of the band is used. It is
difficult to find product specifications with info on the total bandwidth.
Mostly military systems use frequency hopping to avoid jamming. So a middle
ground would be to put full bandwidth of current AP to NOL for FCC type 6
frequency hopping radar.
When frequency hopping radar happens, F/W set flag that full bandwidth need
put to NOL in new added tlv radar_flags of event
WMI_PDEV_DFS_RADAR_DETECTION_EVENT, When find the flag is set, host will
put full bandwidth of current AP to NOL even sub channel marking is
enabled.
To avoid compatibility issue between old/new F/W and new/old host, add a
F/W service bit wmi_service_radar_flags_support and host service flag
is_full_bw_nol_supported.
If the wmi_service WMI_SERVICE_RADAR_FLAGS_SUPPORT is enabled by FW, host
shall set/unset a bit in the host service flag is_full_bw_nol_supported
based on host capabilities. This host service flag is then sent to FW via
WMI_INIT_CMDID.
Change-Id: I6e280ca4ab00dce97c5aec90c7a4b4fc7c4a440a
CRs-Fixed: 3595476
Update version for vendor request 1 and vendor request 2 as
below:
vendor_req_1_version: WMI_HOST_VENDOR1_REQ1_VERSION_4_00
vendor_req_2_version: WMI_HOST_VENDOR1_REQ2_VERSION_3_50
Change-Id: Ib8ff2596c415453c26de3d7d26dce5dceed30556
CRs-Fixed: 3589711
Add support to handle WMI_ROAM_SYNCH_KEY_EVENTID.
WMI_ROAM_SYNCH_KEY_EVENTID is received after roaming to 3 Link
MLO AP when standby link is supported.
Add changes to register handler function pointers and parse
the event.
Change-Id: Iee17560f9f1f3242ef512a550764a9c64319b67f
CRs-Fixed: 3571673
Prepare and Send WMI command to fw to set the rf path. Also, add module
ID for rf path switch for qdf log prints.
CRs-Fixed: 3568221
Change-Id: I7ef0ffe66eaed837424699641d3e5b8537cd0304
Once the FW sends the link switch request to host handle
the request from scheduler thread and send confirmation
back on completion of link switch process with status of
link switch (success/failure).
Add new serialization command type for link switch.
Introduce flags to get the current state of link switch
request, set the state to idle when no link switch in
progress or once the current link switch is completed.
Access to state is protected with MLO dev context lock.
Implement various helper API to:
a) Transition link switch to next state.
b) Get current state of link switch.
c) To check whether any link switch is in progress.
c) To check whether link switch is happening
on assoc VDEV or not.
Introduce a new VDEV flag to suggest the VDEV is in
link switch process and also implement helper APIs to
set/get/clear this VDEV flag.
a) The flag is set at start of link switch, once
the FW request params are validated and before
proceeding for link switch disconnect on VDEV.
b) Clear the flag once the Link switch confirmation
is sent to FW.
Validate the link switch request params:
a) IEEE link ID's received.
b) Check if new connection is part of MLO connection.
c) Check if VDEV is MLO STA VDEV or not.
d) Is VDEV in connected state or not, that means
VDEV is not in transitioning state due to disconnect.
e) Check if any link switch in progress on this MLD
f) Current link ID of VDEV equals the FW params.
If validation is successful, serialize the link switch
command and in the serialization activation start the
actual link switch process.
Change-Id: Ie582650541054c8cf39aaa8316e86a7a40256a15
CRs-Fixed: 3556422
Extract aux device capability from service ready ext2
event, and report such info to wma/mlme/hdd.
Change-Id: I888624fd3443118ba66fadd7a40fcce4f4b5d521
CRs-Fixed: 3549753
Introduce new vdev parameter WMI_VDEV_PARAM_DISABLE_2G_TWT
in order facilitate FW to change twt operation state for
2.4 GHz link
Change-Id: I35436245c5e0ee113a8fdc2edba42a7978b2683d
CRs-Fixed: 3560314
Driver sends feature set information to fw as
part of wmi init command.
Fill sta dump feature info in feature set bitmap
and send it to fw.
Change-Id: If28cd8f10af2333f0f231f0c4ae659ab20c1358a
CRs-Fixed: 3552909
Add support in driver to check whether F.W supports
dynamic MSDU aggregation size programming to H.W.
Change-Id: Ifb2d41efb23934414cce38753df82e1d15f01e11
CRs-Fixed: 3540531
Add INI to disable AST indication. AST disable flag will be
sent to the target in resource config.
Change-Id: If30cac010681faf06bbcaa2d492d6843e3e675d0
CRs-Fixed: 3544223
Extract WMI Service bit for ATF 512 Max client support advertised by
Firmware as part of wmi service ready.
Add rxops functions as for upper modules to get it.
Change-Id: I51e8dcaad96bdd29eb6fd4c37b0917127696ede6
CRs-Fixed: 3551661
Add nstrinfo in ml_partner_info and parse sta info.
Add nstr_info in ml_peer_ctx and peer_assoc_params
and send to FW
CRs-Fixed: 3483776
Change-Id: I255fc671b84a2048c6057a61a6de8d81db36c681
Add wmi pdev param support for long range phy param like cts timeout
slot time etc as part of enabling user config.
Change-Id: If1f3d86e09e634cde43ef8211831511781e96672
CRs-Fixed: 3520970
Add support in driver to check if FW supports per link stats
in case of mlo connection, using the wmi service event
WMI_SERVICE_PER_LINK_STATS_SUPPORT
Change-Id: I85ea50877455efc3646d3b1892ce855dc07b1dbf
CRs-Fixed: 3520338
Add 'max_simultaneous_links' in peer_assoc_params
and send it to FW via peer_assoc_add_mld_params.
Change-Id: Ie4c3492cf03ef43e1bb02122019cda3679fb5f3a
CRs-Fixed: 3476565
