The event WMI_ROAM_STATS_EVENTID is received after
every roam, once the roam synch complete is sent by the host.
This event contains details regarding the btm response.
This helps to debug the scenario when roam failure happen.
Print the info received related to roam scan type & roam status
info into kmsg.
Change-Id: I7c01d482e3152dfbf500dba97001c328f39564de
CRs-Fixed: 2812515
Firmware advertises the service capability bit
WMI_SERVICE_SCAN_CONFIG_PER_CHANNEL when it supports per channel
scan config flags. Get this and cache in psoc.
If firmware supports WMI_SERVICE_SCAN_CONFIG_PER_CHANNEL, it uses
the upper-12 bits(bit-20 to bit 32) of channel_list for flags and
lower 20-bits(bit-0 to bit-19) for frequency. If firmware doesn't
support it, then channel_list holds the frequency value only.
Fill the flags and frequency accordingly.
Change-Id: I88a6f29f61e1ecea75bc5574cadcbbfbb7f8b188
CRs-Fixed: 2806405
Add the WMI command WMI_DBGLOG_MOD_WOW_LOG_LEVEL to enable
debug logs while in wow mode.
Change-Id: Ia1902d989964a5e35f590a075a2de64a9f66d5b7
CRs-Fixed: 2810326
Since new rso ROAM_OFFLOAD_V1 path is enabled, remove
the old rso path code for wmi related files.
Change-Id: Ie519ca7fac2d721f87a4c9bd11507cd83ddfb504
CRs-Fixed: 2810241
Add host data structure and api declarations
corresponding to peer response event and register
WMI_PEER_CREATE_CONF_EVENTID in global wmi event_ids.
Change-Id: I143a4a85d079cc113397348512b0d86f500cae5b
CRs-Fixed: 2797197
Add b_twt_enable variable to enable/disable broadcast TWT in
wmi_twt_enable_param structure and use FW macro in WMI layer
to enable/disable BCAST_TWT in TWT_ENABLE cmd.
Change-Id: I892e922dda14d16019f3f433f885d1eb5b7169fc
CRs-Fixed: 2793360
As part of removing gOclCfg ini, remove code used for it that is
no longer needed.
Change-Id: I00c32988cb3b852381be9810377aeefdd22454db
CRs-Fixed: 2791469
Add WMI command buffer address information(DMA/Physical addr) to
the WMI TX completion logging. This will help in debugging issues
when HW DMAs copies data from a different location than the one
configured.
Change-Id: I60586b865a97e7ff88e48606806ec151321ff0aa
CRs-Fixed: 2789492
Send unified ll_stats and get_stats request over qmi based on INI
configuration.
Change-Id: Icc43352c1ba19696148619100ee27fda4d5ffb41
CRs-Fixed: 2791043
The firmware sends a new status code to indicate an already suspended
TWT session. Update WMI_HOST_PAUSE_TWT_STATUS status code to represent
this state.
CRs-Fixed: 2786636
Change-Id: Id1fbdde8691084e408144454214d59c8ad532f9b
Currently ll_stats and get_station requests are sent back to back
from user space. The firmware time difference between these two commands
results in extra sleep and wakeup for Q6.
To avoid this extra Q6 sleep and wake, send both requests in a single
command from the driver if the firmware supports that operation. Cache
the get_station results in the driver until user space request reach
to the driver.
Change-Id: I5e6f42f9e3836ef4bf61d3d9220f8cedb775cbd5
CRs-Fixed: 2778479
Add peer assoc parameter 'peer_bss_max_idle_option' to
update the peer's Max BSS Idle option cap to FW.
Change-Id: If7fd4369bade8b289655c491849562c2357de877
CRs-fixed: 2781050
Host add support to send WFA test configs to FW using WMI command
i.e. WMI_WFA_CONFIG_CMDID.
Change-Id: Id9bdec16c69a8c16cb4ce1fac87688023c768ee6
CRs-Fixed: 2772004
Firmware advertizes the capability to allocate CMEM memory for
FST via a WMI service flag; adding the support for the same.
Change-Id: Ic33bf0584f5ce4880fdfe5abe8fd4cf2a653a06e
CRs-Fixed: 2771256
Currently, gRoamBeaconRssiWeight is not used in HOST or
FW.
Remove logic to pass value of INI gRoamBeaconRssiWeight
to FW.
Change-Id: Ifa1472ef413d20d0e54649bc24dd6c8d6aac4bc7
CRs-Fixed: 2770278
Set "action" field when send WMI_THERMAL_MGMT_CMDID
to firmware. Then driver can configure the target management action
based on different customer requirement.
Change-Id: I3da5eea0d756444ede816be5cb74407863d63781
CRs-Fixed: 2767144
This records all the WMI events and commands, for all
PDEVs. Set WMI_EXT_DBG flag to enable this feature. Refer
Original Change-Id: I18e46f683e35912cad717ca3b9cc3d1885315362
Change-Id: I4c9bdfe6fdd195656ca0c01ca400eba595be24a3
CRs-Fixed: 2762266
Add sequence number to each packet queued on wmi pipe and
match it against expected sequence number in wmi completion handler.
WMI packets are consumed internally, use the skb mark field to capture
the sequence number of the wmi packet.
Change-Id: I1421e3fcff0a2b326f6d899780c773950544ef26
CRs-Fixed: 2741465
Donot block wmi command sending inside #if macro.
This change is needed because WIN uses only the FW log level
setting and not the complete feature. Only the feature
should be enclosed in #if macros and not the wmi command
sending part.
Change-Id: Ia28c0487d360c1b0a54374bb237811eba6b1af41
Make each WMI debug log buffer size configurable through
compile time config option. Now memory constraint platforms
can use these config options. Use default values if no
values are configured.
Change-Id: Ibc924e12a56ae7d529aea91e55bcc0bbce72ac7e
CRs-Fixed: 2741465
populated fils discovery, unsolicited probe response from
vdev extension stats and populated to APSTATS.
Change-Id: I762d7f36fa45f9048cf591bde3550a415e23bdcb
wmi_host_pdev_nfcal_power_all_channels_event is updated to have
number of freq, nfdbr/nfdbm.
It is assumed that number of nfdbr & nfdbm are the same.
Change-Id: I23279bde55ee42744c50b23e199b04fbc070a87f
Support WHUNT FW simulation feature.
Records all the WMI events and commands, for all PDEVs.
Set WMI_EXT_DBG flag to enable this.
Change-Id: I18e46f683e35912cad717ca3b9cc3d1885315362
CRs-Fixed: 2762266
Firmware expects the channel property WMI_CHAN_FLAG_NAN_DISABLED
to be set if NAN is not allowed on any channel. Firmware shall
check the flag and decides whether to enable NAN/NDP on that
channel.
Change-Id: I8e283d2cd0f83a43e04dad142b09d519ef7f0db3
CRs-Fixed: 2760348
This will help to configure desired rate mask. It can be
used to optimize link performance.
Change-Id: I15b6fbc512d9b0869a6ad6a6f24f1593abf14dae
CRs-Fixed: 2758871
This change allow Tx VDEV of MBSS mode to configured
dynamically by reset the VDEVs.
This change includes FW service bit parsing, checking
VDEV state of all VDEVs, sending MBSS information in
VDEV start command
Change-Id: I46b13629bd1c07be86b408d72c2967642ce8542e
CRs-Fixed: 2759229
To get the pmf beacon stats from firmware, host sets
WMI_REQUEST_PMF_BCN_PROTECT_STAT bit in stats_id param of
WMI_REQUEST_STATS_CMDID command. Firmware supporting pmf beacon
protection stats responds host with stats in wmi_update_stats_id
event.
Hence add support to get PMF beacon protect stats from firmware.
Change-Id: I99efd94ce5367da1312f60251ce7106997dd8bc8
CRs-Fixed: 2705084
Currently, the WMI definitions for BSS Color are not draft specific.
Update the BSS Color macros to be compatible with changes in
802.11ax Draft 3 and newer.
Change-Id: I20c842ff11ab449024c4fc1a0ef822c525ff40ec
CRs-Fixed: 2753170
Add changes to support new definition of
send_roam_scan_offload_mode_cmd() in connection manager.
Change-Id: Iea10907756ea785b0b0de72d01375f50ac3dbd6a
CRs-Fixed: 2758318
For older targets thermal mitigation is supported for the apps.
In moselle there is a new processor wpps on which firmware runs,
this commit adds the support for the thermal client wpps.
Change-Id: Ia212cd08c000ab11d4079cc701634dd919447ae9
CRs-Fixed: 2757932
Add service bit support for channel tx and rx time in channel stats.
This service bit helps in not interpreting the default values for
tx_time and rx_time when new driver version is used with old firmware
where this tx_time and rx_time support is not present.
Change-Id: Icc7668f5842677ac6ef48176568301753e217ea7
CRs-Fixed: 2751500
To send received raw event buffer to event handler
Send without processed buffer to registered event with buffer
type WMI_RX_RAW_BUFF
Change-Id: I2a401e2e7afbfd8f32d4bd521d184ed9ddcdb264
Rename struct wmi_mawc_roam_params name to wlan_roam_mawc_params.
Rename struct wmi_bss_load_config name to wlan_roam_bss_load_config.
Rename file wlan_cm_roam_public_srtuct.h name to
wlan_cm_roam_public_struct.h.
Change-Id: I3e05d899810f8e899b5d6f48a3aa48c041cd17e3
CRs-Fixed: 2758137
Currently, stats over QMI features can only be disabled over build flags,
which is not flexible. Hence, add a CFG ini item to enable/disable stats
over QMI.
Change-Id: If5d57d2fc781fecc8817c2da8f61a2f7977d9c77
CRs-Fixed: 2752310
FW advertises scan radio capabilities as part of service ready
ext2 event. This is an optional TLV, presence of which indicates scan
radio support for the that pdev.
CRS-Fixed: 2746769
Change-Id: I5a0231c54375e9f00c85f0ad92839e2fa6c79f39
