Enable lower 6G edge channel ch2 (5935MHz) for APL2 6G regdmn
using a service bit WMI_SERVICE_ENABLE_LOWER_6G_EDGE_CH_SUPP,
which is not enabled by default.
Also, disable upper 6G edge channel (7115MHz) using another
service bit WMI_SERVICE_DISABLE_UPPER_6G_EDGE_CH_SUPP, that
is enabled by default.
Change-Id: Ia7cb7f7d3165375178adbe70adb19b8671496b6d
CRs-Fixed: 2885623
In order to support different power levels of 6G AP and client,
the channel list event from FW namely "REG_CHAN_LIST_CC_EVENTID"
is modified to add few parameters specific to 6GHZ devices.
Hence the existing event is replaced by REG_CHAN_LIST_CC_EVENT_EXT for
all 2G/5G/6G pdevs in FW. Therefore, after the service ready event, FW
sends the channel list for the configured country/regdomain via
REG_CHAN_LIST_CC_EVENT_EXT. This mandates that all host software need
to have the processing capability of REG_CHAN_LIST_CC_EVENT_EXT to bring
up the AP.
As there can be host software which has not yet implemented the
version of "REG_CHAN_LIST_CC_EVENT_EXT", backward compatibility is lost
if "ONLY REG_CHAN_LIST_CC_EVENT_EXT" is sent by FW.
Hence a 3 way handshake between host and FW is established.
1. FW advertises its capability of processing REG_CHAN_LIST_CC_EVENT_EXT
id via wmi service bit 'wmi_service_reg_cc_ext_event_support'.
2. If the host is capable of processing the "REG_CHAN_LIST_CC_EVENT_EXT"
event id (which is done based on registration of this event), host
sends the capability in WMI_INIT_CMDID setting a bit in host_service_flags.
3. Based on host capability advertised in WMI_INIT_CMDID, FW decides to
send the old event ("REG_CHAN_LIST_CC_EVENTID") or the new event
("REG_CHAN_LIST_CC_EVENT_EXT").
4. If there is no flag indicated by host to FW in WMI_INIT_CMDID, FW
by default sends the old event ("REG_CHAN_LIST_CC_EVENTID").
CRs-Fixed: 2876360
Change-Id: Ibe95f414ad9fff0e5641bcc6e60450ef9afe245b
FW advertises WMI_SERVICE_OCV_SUPPORT bit in service ready event if
firmware supports Operating Channel Validation feature.
Change-Id: Ida1ee9874f9cd32a684ceee728e3323306137c64
CRs-Fixed: 2880794
The host will send TPC power to FW via the new WMI cmd
WMI_VDEV_SET_TPC_POWER_CMDID going forward instead of
WMI_VDEV_PARAM_TX_PWRLIMIT to accommodate 6GHz channels.
But, to support backward compatibility for New Host+old FW
the TPC power will be sent to FW via legacy WMI cmds
WMI_VDEV_SET_PARAM_CMDID (during initial connection) or
WMI_VDEV_PARAM_TX_PWRLIMIT (power value change during RRM
req/bcn processing from connected AP) with the help of a
service bit WMI_SERVICE_EXT_TPC_REG_SUPPORT.
Change-Id: Iea1ecb62841c539c13a804ae9c475831b2d4c89c
CRs-Fixed: 2874250
Fix issue on enabling packet log.
Fix issue on logging CBF pkt in AP/STA mode.
Fix issue on setting data length 4 bytes aligned in pktlog header
, htt stats indication message header and Rx management TLV header.
Add CBF support for pktlog WMI enable command for firmware to enable
CBF receive.
Change-Id: Ib0067f32d7414be96503c4c67846c1312a59586e
Add SAP and P2P GO d3wow feature support config to send it down
to FW during WMI INIT such that FW is aware when SAP and GO with
client connected mode d3 wow feature is enabled.
Change-Id: I04b398f71727112ce5c536bbf2bfcfd4eefe2752
CRs-Fixed: 2866604
Add a pci gen switch flag in the wmi resource config to send
to FW in the init command.
Change-Id: If3a50d80103387a8f1f77ecb43a16c7b41ce5a11
CRs-Fixed: 2865866
Firmware advertises service capability WAPI_CONCURRENCY_SUPPORTED
if it supports other security modes when WAPI is active. Get the
same from service capabilities to decide whether to accept a
new concurrent connection or not.
Change-Id: I718503e52be2dda8ebd440f5a68b496d846b6ffc
CRs-Fixed: 2858770
Since in wmi_gpio_config_cmd_fixed_param, the input
0 mean output, and 1 mean input, which is different
from host side enum gpio_direction. So add this fix
to do the right conversion.
Change-Id: Id60a9327e853440fd58a45c7c839109cf1f22c22
CRs-Fixed: 2856833
Using this option the user pd assert and root pd assert can
be linked together or unlinked from each other.
By default, a user pd assert leads to root pd assert.
Unlinking the user pd assert from root pd assert helps in
handling the selective radio recovery seamlessly.
Change-Id: I734805b060bf1cb11a0dc325bae5dbf6ed7db83f
Initially, Host updates the AKM only after the EAPOL
handshake. Due to this, Enterprise auth is not detected
for initial connection.
Add AKM in peer assoc command(WMI_PEER_ASSOC_COMMAND)
to the firmware. In firmware, this will help to detect
Enterprise auth as part of connection and prioritize
the WLAN connection over BT traffic accordingly.
Change-Id: I6463dacbba098c76e6c3b7f4722915797bee1a99
CRs-Fixed: 2848392
Firmware has added TWT nudge, All TWT and TWT stats support.
This feature capability is advertised by firmware in service
ready. Add support fetch and store this information.
Change-Id: Ife3f9e4fbebd5e971c512115d924535a84bf82e6
CRs-Fixed: 2854129
Register the event handler for new WMI event,
WMI_REG_CHAN_LIST_CC_EXT_EVENTID. Extract the parameters to be used when
building the channel lists in the regulatory component. Update the reg
rule parsing function to include the new PSD flag and PSD power levels.
Change-Id: I0f5a747f98e43ac3d43b4aa1fb5958f0eac69a9d
CRs-fixed: 2843793
Fw advertise big data stats in response of host
command WMI_VDEV_GET_BIG_DATA_P2_CMDID.
Add interface change to handle BIG_DATA_P2_EVENTID.
Change-Id: I906afb71eb7f6bf95cd967a69d56fa333ecae177
CRs-Fixed: 2848445
Add CFO, agc_gain and rx start timestamp related parameters
to wmi_cfr_peer_tx_event_param and populate the same with
data from FW peer tx event.
Change-Id: I462fa56a854b18d1f9b46d1e14eea85da0d45f23
Add a new WMI service bit to indicate whether normal
Spectral scan is disabled.
CRs-Fixed: 2840128
Change-Id: I09314afeb5372f83b8356e06f245c83c7acbc85d
Add support for WMI_TWT_NUDGE_DIALOG_CMDID and
WMI_TWT_NUDGE_DIALOG_COMPLETE_EVENTID.
Change-Id: I9d4bf1061f6f08479967619ce50d2756c062f55f
CRs-Fixed: 2825138
The bcast twt functionality may need to be enabled separately
for requestor and responder roles. Enable such configuration
by looking up WMI service bit support from target:
wmi_service_twt_bcast_req_support
wmi_service_twt_bcast_resp_support
Change-Id: Ibc91173c23cf69f0d248af27d61c77bee3e8f48a
CRs-Fixed: 2828720
Add support to view station's peer RSSI value in auth and assoc request
packet by extracting rssi from probe request and passing it down to
FW in the auth request and assoc request mgmt frames.
Change-Id: I92f714ed815ab8c77f6a6b7df3363dc96f1119bc
CRs-Fixed: 2832982
The event WMI_ROAM_STATS_EVENTID is received after
every roam, once the roam synch complete is sent by the host.
This event contains details regarding the btm response.
This helps to debug the scenario when roam failure happen.
Print the info received related to roam scan type & roam status
info into kmsg.
Change-Id: I7c01d482e3152dfbf500dba97001c328f39564de
CRs-Fixed: 2812515
Firmware advertises the service capability bit
WMI_SERVICE_SCAN_CONFIG_PER_CHANNEL when it supports per channel
scan config flags. Get this and cache in psoc.
If firmware supports WMI_SERVICE_SCAN_CONFIG_PER_CHANNEL, it uses
the upper-12 bits(bit-20 to bit 32) of channel_list for flags and
lower 20-bits(bit-0 to bit-19) for frequency. If firmware doesn't
support it, then channel_list holds the frequency value only.
Fill the flags and frequency accordingly.
Change-Id: I88a6f29f61e1ecea75bc5574cadcbbfbb7f8b188
CRs-Fixed: 2806405
Add the WMI command WMI_DBGLOG_MOD_WOW_LOG_LEVEL to enable
debug logs while in wow mode.
Change-Id: Ia1902d989964a5e35f590a075a2de64a9f66d5b7
CRs-Fixed: 2810326
Since new rso ROAM_OFFLOAD_V1 path is enabled, remove
the old rso path code for wmi related files.
Change-Id: Ie519ca7fac2d721f87a4c9bd11507cd83ddfb504
CRs-Fixed: 2810241
Add host data structure and api declarations
corresponding to peer response event and register
WMI_PEER_CREATE_CONF_EVENTID in global wmi event_ids.
Change-Id: I143a4a85d079cc113397348512b0d86f500cae5b
CRs-Fixed: 2797197
Currently ll_stats and get_station requests are sent back to back
from user space. The firmware time difference between these two commands
results in extra sleep and wakeup for Q6.
To avoid this extra Q6 sleep and wake, send both requests in a single
command from the driver if the firmware supports that operation. Cache
the get_station results in the driver until user space request reach
to the driver.
Change-Id: I5e6f42f9e3836ef4bf61d3d9220f8cedb775cbd5
CRs-Fixed: 2778479
Add peer assoc parameter 'peer_bss_max_idle_option' to
update the peer's Max BSS Idle option cap to FW.
Change-Id: If7fd4369bade8b289655c491849562c2357de877
CRs-fixed: 2781050
Host add support to send WFA test configs to FW using WMI command
i.e. WMI_WFA_CONFIG_CMDID.
Change-Id: Id9bdec16c69a8c16cb4ce1fac87688023c768ee6
CRs-Fixed: 2772004
Firmware advertizes the capability to allocate CMEM memory for
FST via a WMI service flag; adding the support for the same.
Change-Id: Ic33bf0584f5ce4880fdfe5abe8fd4cf2a653a06e
CRs-Fixed: 2771256
Set "action" field when send WMI_THERMAL_MGMT_CMDID
to firmware. Then driver can configure the target management action
based on different customer requirement.
Change-Id: I3da5eea0d756444ede816be5cb74407863d63781
CRs-Fixed: 2767144
populated fils discovery, unsolicited probe response from
vdev extension stats and populated to APSTATS.
Change-Id: I762d7f36fa45f9048cf591bde3550a415e23bdcb
wmi_host_pdev_nfcal_power_all_channels_event is updated to have
number of freq, nfdbr/nfdbm.
It is assumed that number of nfdbr & nfdbm are the same.
Change-Id: I23279bde55ee42744c50b23e199b04fbc070a87f
Firmware expects the channel property WMI_CHAN_FLAG_NAN_DISABLED
to be set if NAN is not allowed on any channel. Firmware shall
check the flag and decides whether to enable NAN/NDP on that
channel.
Change-Id: I8e283d2cd0f83a43e04dad142b09d519ef7f0db3
CRs-Fixed: 2760348
