Currently 11d offload functionality is in reg_host_11d.c and
reg_host_11d.h files and are getting controlled with a
feature flag HOST_11D_SCAN.
HOST_11D_SCAN flag is to enable host 11d scan and 11d offload
feature should not be controlled with this flag.
Move 11d offload functionality to separate files
reg_offload_11d_scan.c and reg_offload_11d_scan.h.
Change-Id: Ia56fe7009f2f5f9317da9e0e22f15040fe19a20d
CRs-Fixed: 2382486
In son_ol_send_null(), check for the return value of
GET_WMI_HDL_FROM_PSOC() before using it.
Also, pass argument of type wmi_unified_t in calls
to wmi_unified_stats_request_send().
Change-Id: Idfedae2fcbde6d18b1829adefcabac0adbc55859
CRs-Fixed: 2371368
Add target_if/mlme/vdev_mgr to handle vdev
mgmt related ops inorder to send corresponding
requests to WMI and processing response events
and Tx callbacks are introduced in MLME LMAC
Tx Ops structure which are initialized from
target_if main.
Change-Id: I9d02b17fdb04757d7dc523dd41e409c0fb1e5edf
CRs-Fixed: 2383346
Populate Spectral capability structure with scaling parameters
from extended service ready event parameters. Send the spectral caps
via cf80211 interface.
CRs-Fixed: 2379652
Change-Id: Id0372bdd40843c2101df32d2e71920027a24909f
Extended service ready event has a tlv
containing the spectral bin scaling parameters.
Populate the spectral capabilities using this info.
CRs-Fixed: 2379652
Change-Id: I0b4648302e7170b5965cf1aec68638e70cd36e73
os_timer_t is a legacy wrapper around the kernel's timer_list type, and
is incorrectly used directly with qdf_timer APIs. Remove os_timer_t,
replacing instances with qdf_timer_t instead.
Change-Id: I410b7fafad18be01141008b6220fbe34ab07601e
CRs-Fixed: 2388575
Add Unregister API to de-register and free resources in direct buf
module. Existing logic of freeing all resources as part of pdev destroy
does not take care of soc_start and soc_stop scenarios. Add this API to
enable modules to de-register as part of soc_stop and register during
start.
CRs-Fixed: 2385313
Change-Id: Ibe6f6bc5f4bd2acc5a9fe71eee09c151853073bc
Call qwrap_config enable from both ready and extended service ready
handler. This change is needed for lithium chipsets where the number
of radios per soc is more than 1. Number of radios is updated only
in extended service ready handler and this qwraP_config_enable should
be called in extended service ready
Change-Id: I12289c38996f3bb4274e5795d434dd86c83f34c0
CRs-Fixed: 2384604
When Spectral is disabled via INI and the rxchainmask is set for
the radio via iwpriv/cfg80211tool, it results in null pointer access
of target_if_spectral pointer. To fix this, add Spectral feature check
inside target_if_spectral_set_rxchainmask.
Change-Id: Ibd43d3bbc8622d4b8502653b55511bb4667cec7a
CRs-Fixed: 2380653
Create below regdb file in core component and move the code from
reg_services.c file.
These files has only MCL specific code.
reg_db_lte.c: this file has LTE feature code.
reg_host_11d.c: this file has 11d feature code.
reg_opclass.c: this file has opclass related code.
reg_getset.c: this file has the functions related to setting and getting
regdb related variables.
reg_callbacks.c: this file has regdb callbacks/notificatoion functions.
Change-Id: Ie43acc03a5c35200f3e43bc978b792d5047eeb77
CRs-Fixed: 2349173
Remove 11d and LTE feature specific code from target_if_reg,c file.
Removed code is present in target_if_reg_11d.c and target_if_reg_lte.c
files.
target_if_reg.c file has the common code used by both WIN and MCL.
Change-Id: I976efbfadc6b01289cb258be4856b81d4783456a
CRs-Fixed: 2349173
Create target_if_reg_11d.c and target_if_reg_lte.c files.
Move 11d and LTE feature specific code from target_if_reg.c file to
these files.
These files has only MCL specific code.
Change-Id: I016c6e6c8b6d54670496367e08ac5d83ad94bebd
CRs-Fixed: 2349173
Logs of the Spectral WMI interaction prints are under
OL_SPECTRAL_DEBUG_CONFIG_INTERACTIONS macro and is disabled by default.
As the WMI logs are already controllable at runtime from qdf_cv_lvl,
there is no need for OL_SPECTRAL_DEBUG_CONFIG_INTERACTIONS anymore.
Change-Id: I3b89192de4deb420d853631064c20add894fb1e3
CRs-Fixed: 2369846
Rename target_if_open() to target_if_init() and target_if_close()
to target_if_deinit() as these handles global target_if
initializations.
Change-Id: I935eb6461f1774043adaa0539b6e8e0ea9824382
CRs-Fixed: 2352015
Add host support for db2dbm RSSI changes. Firmware
indicates this capability when underlying hardware
has RSSI reporting feature. Based on this capability
host will know if firmware sends SNR or RSSI. If no
capablity is present then host will convert SNR to
rssi using a fixed offset of -96. If capability is
present host will directly use the rssi as it is.
Change-Id: I9058f16c6280d466feb96cf88a8a0d8cd7b02032
CRs-Fixed: 2364025
Spectral HW time stamp gets reset when a reset happens in
within target. This can potentially result in unpredictable
behaviour during classification. To mitigate this calculated
offset is added to the time stamp value in the FFT report.
HT = Spectral HW timer
AT = Actual time stamp in spectral report
CF = Time stamp correction factor
CT = Corrected time stamp
L = Time stamp in the last FFT report before reset
F = Time stamp in the first FFT report after reset
D = Time gap between the last spectral report before reset
and the end of reset(This is provided by FW via direct
DMA framework)
***Target Reset***
^
|
|<---D---->| time line--->
_______________________________________________________
^ ^ ^ ^
| | | |
HT --> 0 L 0 F
AT --> 0 L F
CF --> 0 0 (L+D)
CT --> 0 L (F+L+D)
Spectral driver corrects the time stamp received from target
using the following formula and sends upwards.
CT(Corrected time stamp) = AT(Actual time stamp) +
CF(Correction Factor)
Calculation of Correction factor (CF):-
---------------------------------------
Initialization : CF = 0
CF += (L + D) (Done only for the first spectral report after reset)
This scheme takes care of the wrap around in the 32 bit time stamp
which would have occurred if the timer was not restarted due to
target reset.
CRs-Fixed: 2356382 2355486
Change-Id: I17b55d39eb91eb03b867bcfddaf3eb03d1fc5d1b
Add support to choose the hw_mode_id from FW supported modes. Preferred
mode will be selected if it is not configured in ini params. It is
selected based on the precedence as per capabilities supported by the
mode. For eg., if FW supports DBS and DBS_SBS, DBS_SBS is selected as it
supports three radio compared to DBS's two radio.
This can be overridden by user by setting proper hw_mode_id in ini file.
Change-Id: I162c3a66182882890c416a68f7f64d5149b8f1e5
CRs-Fixed: 2361280
TDLS component used in CLD only and needn't in hostcmn. So there
is requirement to move it from hostcmn to CLD. This change removes
policy mgr related files/codes from hostcmn.
Change-Id: Ifeaf1447e74f83a17072d08c4a0ff62a13e91518
CRs-Fixed: 2361584
P2P component used in CLD only, and needn't in hostcmn. So move P2P
component from hostcmn to cld. This change remove P2P related/codes
files from hostcmn.
Change-Id: I351ee153588bbcdb62041b4626370d451a3f56bb
CRs-Fixed: 2361487
Remove CONFIG_WIN from spectral module to achieve maximum
possible convergence.
CRs-Fixed: 2354105
Change-Id: I59e4d8029fcf096042741573cf020136747e7367
NAN will not be needed in CMN codebase, to reduce the
unnecessary lines of code all the NAN related files have
been merged into CLD. Remove all those files from CMN,
remove NAN related API's and structures from init-deinit,
target if and lmac components.
Remove NAN component and related files from CMN.
Change-Id: I8fa22b84aff30cfbb7a8cd0a573acf6e0a9d8744
CRs-Fixed: 2338061
A few instances of violating "Block comments should align the * on
each line" have been identified in target_if/dfs, so fix them.
Change-Id: Ic198912225b8bec587e30d00d7a2a5f76e03d366
CRs-Fixed: 2359528
In function init_deinit_chainmask_table_alloc, alloc size is declared
as uint32 and is assigned the value the multiplying non zero value
sizeof(struct wlan_psoc_host_chainmask_capabilities) and uint32
value ser_ext_par->chainmask_table[i].num_valid_chainmasks.
This can lead to overflow as multiplies value can be more than uint32.
Change-Id: I9a886d9ee5213ae8989a2c5d4502336cc275418a
CRs-Fixed: 2347650
Introduce dfs_tgt API to send the WMI command to enable/disable
"Subchannel Marking" in Firmware (only in Full Offload)
Change-Id: If739409521c8704b612e52dfc8ed6b86ffe32bca
CRs-Fixed: 2334258
In target_if_dbr_fill_ring(), min_buf_align (8 bytes) was added to
min_buf_size before allocating the memory for dbr_buf_pool. This leads to
extra 1MB allocation.
To avoid this extra allocation, call qdf_aligned_malloc() to allocate
aligned memory for direct rx buffers.
Change-Id: I72f7c616c7a699437b081de7149a4a67a3ad30c4
Acked-by: Shashikala Prabhu <pshashik@codeaurora.org>
CRs-Fixed : 2336697
Add an array bounds check for the FFT bin arrays in SAMP message so
that they do not overflow even if an unexpectedly high FFT bin count
parameter is requested by the caller. Also reflect FFT counts limited
by bounds check into SAMP message. These changes act as an additional
guard sequence - functionality for the calling path itself to reject
samples that exceed the expected FFT bin count or have other
unexpected issues will be added in the future based on target side
profiling.
Change-Id: I4af24f623691cc2c2b04243cb64f05d159f035f6
CRs-Fixed: 2348397
Remove unused variable temp_samp_msg_len from
target_if_spectral_create_samp_msg(). This variable does get updated,
but is ultimately unused. By removing it, we save processor cycles
which would otherwise be wasted on the update operations occurring for
each Spectral sample.
Change-Id: Ib5ca5598d5bee6cc15ca72e9e002239d2e76fd6c
CRs-Fixed: 2349113
Increase the number of repsonses per dbr event to 2 to
support Spectral scan in 160MHz mode
Change-Id: I47ee933b06d94a9a02f7d448b631dfdb99e297c4
CRs-Fixed: 2297498
1. Send add random mac addr rx filter WMI command
to target
2. Add/Del the active random mac addr entry
3. Clear random mac addr from target if not active
Change-Id: I9dcbdc20b76d9865da7a8db6ee013bf5e44e4407
CRs-Fixed: 2322097
For HK V2 each fft bin is 2 bytes due to
some HW limitations. To fix this modify the
fftbin size WAR to convert 2 byte fft bins to 1 byte
and forward to applications via SAMP message.
CRs-Fixed: 2319415
Change-Id: I6c27d6804ddaf91ed9e6695e0b21a81115744fff
During SSR, target country code is reset to default, may not same as
current country code, need restore it.
Change-Id: Ib8f51755f442d73ad6e11bbfb18fb22a60f724ba
CRs-Fixed: 2318283
num_mem_reqs used as for loop vairable in init_deinit_handle_host_mem_req,
will give user control over tgt_hdl->info->num_mem_chunks used in
init_deinit_alloc_host_mem() which is later passed to
init_cmd_send_tlv().
In init_cmd_send_tlv() num_mem_chunks is used as a for loop variable,
and can result in OOB issue.
Change-Id: Ica9bd42e596da19a4033ffd9424ddeedb593bad1
CRs-Fixed: 2331844
Abstract BMI callback from common module and move it to specific component.
Add Export symbols to support modularization in WIN. (BMI)
CRs-Fixed: 2324081
Change-Id: I1ec463d41d238ce81254ecc1f0bb1dc545e1248e
Phy_id value in reg_process_master_chan_list comes directly from firmware.
Therefore, check for OOB value for phy_id.
Change-Id: I0b634e2630c4d6e5d4a15a86953e7a0ed3df6f47
CRs-Fixed: 2327711
Add new qdf API: qdf_is_recovering and
qdf_register_recovering_state_query_callback.
Client driver will register the state query callback
to common driver to report the recovering state.
Regulatory skip the chanlist update event during SSR
to keep the current regulatory setting.
Change-Id: I58e503cce162a0351d566148c1897a5012889c62
CRs-Fixed: 2321820
Add Gen3 Spectral host WAR to remove NULL FFT bins for report mode (1)
in which only summary of metrics for each completed FFT + spectral
scan summary report are to be provided. This would be required on some
Gen3 chipsets (starting with IPQ8074) under the following
circumstances: In report mode 1, HW reports a length corresponding to
all bins, and provides bins with value 0. This is because the
subsystem arranging for the FFT information does not arrange for DMA
of FFT bin values (as expected), but cannot arrange for a smaller
length to be reported by HW. In these circumstances, the host driver
would have to disregard the NULL bins and report a bin count of 0 to
higher layers.
Change-Id: If5fb72805dc80ada0ab617b4b1c2cc9ea497bcf8
CRs-Fixed: 2300251
Add host WMI support for EAPOL minrate resource configuration.
Through the use of the global.ini configuration parameter -
eapol_minrate_set and eapol_minrate_ac_set, the user can set EAPOL
frames to be sent in minimum rate in tunnel mode. In addition to
this, the user can also select between the 4 ACs (BE, BK, VI, VO)
to send the EAPOL frames.
The changes are reflected in the target resource config which
is sent to the firmware.
Change-Id: Ib9a264b64305bf43708c3c2af3ff254b6cc28477
CRs-Fixed: 2298020
