From Kalama, the HW scheduler abstracts the low level
PP_DONE/WB_DONE interrupts and generates a common
CTL_DONE interrupt per hw ctl. This saves the software
the irq latency delays to process the frame complete
operations when multiple encoders are involved.
If supported, this change enables and waits for the
CTL_DONE interrupt instead of PP_DONE and WB_DONE.
This change adds support to wait for CTL_DONE irq in
only command mode panels as we don't drive two WB blocks
with single CTL.
Change-Id: I084d6bfb6a9fb0b48f912fe5787401c460ec5b56
Signed-off-by: Jeykumar Sankaran <quic_jeykumar@quicinc.com>
Add changes to configure the downscale blur hardware block based on
the conifgs set by user-mode. Program the ctl's writeback flush and
active bits when dnsc_blur is enabled. Bind the pingpong block that
feeds pixels to dnsc_blur hw block. Disable the active bits and unbind
the pp block binding during wb disable.
Change-Id: I1961ab437e344b13d0c186c1675a5bf79b84ea74
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add a custom cache_enable property in writeback connector to allow
user-mode to control the cache setting on a frame basis. Configure
the hw and activate/deactivate the llcc based on the property. The
custom property is added based on the availability of the system
cache for writeback.
Change-Id: I812b31955eb36c75c33ac279b56502a13f7cdcbf
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add a writeback connector property EARLY-FENCE-LINE to give usermode
the control on when to trigger the retire fence. This option is useful
in 2-pass composition, where the writeback triggers the retire-fence
early based on the prog-line which allows primary to start the fetch
before wb transaction is fully completed. This helps to keep the clks
and bw low. WB hardware generates the line-ptr-irq when wb output reaches
the configured prog-line. Retire fence is triggered based on the irq by
default and wb-done handles for cases where line-ptr-irq is missed.
Change-Id: I20867979693dc3447f77da24cd7e88305947fb6d
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
From MDSS 9.0, writeback supports a programmable lineptr support, which
generates an interrupt when the configured writeback output height is
reached. Add software support to configure the prog_line and to process
the interrupt.
Change-Id: I3293ad2984c51417e4691c5b11e9c9a010067e1c
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Currently, writeback frame-triggers are serialized by default. Add
logic to support the different frame-trigger modes which can be set
through the connector property or encoder debugfs node.
- default: waits for frame(N-1) completion (wb-done-irq) before
configuring current frame(N) and releases the commit-thread on
frame-start (ctl-start-irq)
- posted-start: no previous frame(N-1) completion wait. Configures
frame(N) and releases the commit-thread on frame-start (ctl-start-irq)
- serialize: no previous frame(N-1) completion wait. Configures frame(N)
and releases the commit-thread on frame(N) completion (wb-done-irq)
(wb-done-irq) before configuring the next frame.
Restrict wb posted-start support only for MDSS 9.x+ targets, with older
targets defaulted to default-mode.
Change-Id: Id441378fd79ecbfcfb820da1ff23b14ccfd8e798
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Remove the writeback kickoff_count/frame_count & start/end time
logging. These are redundant counters used for debug purpose. The
pending_retire_fence_cnt and event-logs timestamp can be used for
this purpose. Remove the bypass_irqreg flag as well as its not used.
Change-Id: I1644325afc214f75c76baad615da90c8114836cc
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
MDSS INTF HW block does not generate vsync if controller
turns off the link clock prematurely. This leads to
frame trigger timeout and SDE driver triggers the retire
fence after 84ms to recover gracefully. A client may switch
source pipe from one CTL path to another CTL path based
on delayed retire fence. It can lead to other ctl path
hang. This can be resolved by resetting the lm blend
stages for each missing vsync frame trigger.
Change-Id: I5a6ed03afbdad83d8fd6decc593d39e04bef62e4
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Current timeout values in sde driver for vblank, kickoff and
frame complete timeouts are fixed and can be much lower than
a vsync incase of low refresh rate display. Compute timeouts
based on refresh rate for low refresh rate displays.
Change-Id: I9dda41feb15446de7451824e185321de421ad575
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
This change adds support for qsync min refresh rate per
timing mode and populates qsync min refresh rate based
on the current fps when qsync is enabled.
Change-Id: I191d1d72e95dd065c8c0b56a6100104c00c6d8f6
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
VA minidumps supports to add any allocated variable or data to
minidumps. Add panic notifier and wrapper function to add
sde data to minidump va. Add event log, register log, register dumps,
debug bus and different sde variables and states info to minidump.
Change-Id: If54da0b7067df17877e4da645d82f1705baa3f6d
Signed-off-by: Andhavarapu Karthik <kartkart@codeaurora.org>
While setting up vsync source, display info is used to decide whether
or not watchdog TE should be used. This change passes display info
as a parameter to vsync setup rather than using the encoder's display
info which is not updated in the case of panel dead error.
Change-Id: I928ee2012eec7bf63f4ba3538082bc3e47d5e99d
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Change adds support for splitlink and disables
dsc merge or 3dmerge which is not needed for splitlink.
Change-Id: I77a794d3ea6f53988f493a7af792add81abb22f0
Signed-off-by: Vara Reddy <varar@codeaurora.org>
Calculate line_time once during modeset and allow
each plane to use it instead of calculating for each frame.
It also simplifies the line_time calculation for
command mode display.
Change-Id: I94ce29eec94bfdbee9016fbf93378661ebf79c03
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Avoid irq enable/disable during modeset and trigger
frame as posted start frame. This saves mode_set time
and also avoids unbalanced vblank_irq in this usecase.
Change-Id: I06958da5e52bc2aca0ddc60d2783615f80a839a4
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
Add precise vblank timestamp support through the DRM framework.
Implement the vblank related hooks to get the vblank count and
timestamp. Use MDSS 8.x, hardware feature that supports logging
of the vsync timestamp counter which can be used to derive the
accurate kernel timestamp. The current ktime would be returned
for older targets to support backward compatibility.
Change-Id: I2d35ed4a643a519e602278b6d16e67ccee16a60b
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
For dedicated CWB pingpong blocks, the overflow irq needs
to be mapped properly to existing IRQ handlers. Add the
needed changes in code.
Change-Id: Ibf398faac60acc027e4577504f9292ac2b72bae2
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Watchdog timer is moving from TOP to INTF. This change adds
support for movement and ensures backwards compatibility.
Vsync select only needs to specify whether or not to use
Timer 0 associated with the interface. It does not need to
select between Timer 0-4.
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Change-Id: I9d89a8cb1ea607e9fc0bdbffa0a6a9acceff7f13
In current implementation qsync min fps is single value.
It is same for all the list of supported dfps list.
Added support for new dt entry dsi-supported-qsync-min-fps-list
corresponding to the fps supported in the dfps list
dsi-supported-dfps-list.
Change-Id: Ifd5309c2f51865a3c0d9fadb65cbcd291b6ef42b
Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org>
Commit Ifa100424733 ("disp: msm: sde: delay
encoder disable for clone mode") delays the CWB
encoder disable but it is also skipping the CWB
disable flush. That can cause the underrun on dp
display if it uses the same 3d_merge HW block. This
change reverts the portion of original code and
only delays the last cwb frame done wait. It still
keep the last CWB frame done wait as it is if crtc
is also moving to inactive state.
Change-Id: I3461188a35197f2925899ceea7ef705adf00a398
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
This change adds 2 vsync delay after changing the timing engine
parameters namely the porches to update the refresh rate.
This ensures that panel vsync is updated as per new timing before
modifying it again.
Change-Id: I5866ea2f6f2e68bc8ce7435c4a5dbe27d8ebdd91
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
Adjust the QSYNC line count calculation to compensate for the
idle time, when no transfers are actively taking place.
Change-Id: If91eab25321eea6e6880f07605c5a9c1b7b7ee05
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Vblank refcount can reach out of sync with below case
1. event_thread triggers the vblank_enable
2. commit_thread triggers the modeset
2.a modeset resets the vblank refcount with mode_set
3. event_thread triggers the vblank_disable
Event 2.a resets the vblank refcount and vblank disable
request after 2.a is going to fail. This can be fixed
by avoiding concurrency between mode_set call and vblank
request.
Change-Id: Ibb810ec90e81d63feee443f1c37dd736d5cfac0d
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Add support for all 4LM topologies in new DCE encoder framework.
This change also aligns with the new way of checking topology
information.
Change-Id: I5358d60634070bdb26059056db884ad4161c073e
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Add support for all 4LM topologies in new DCE encoder framework.
This change also aligns with the new way of checking topology
information.
Change-Id: I20785c96569fd07cbd8016d244a7e4c929bfa071
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
With posted start enabled SW no longer waits for ppdone events
unless more than one frame is in queue. HW recovery logic relied
on these waits to know when we recover from a timeout. This
change moves the HW recovery SUCCESS event signalling outside of
the wait to ensure this event is sent to user-space regardless
of the status of posted start.
Change-Id: I8896e8126284b415513499723ccf0155ee8bc6a7
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Make msm_drm into single module and all child driver
registers and unregisters are handled from parent's
register and unregister respectively.
Change-Id: I017513d1de3b6b25dd5543d7fa7741c0bac1740d
Signed-off-by: Shashank Babu Chinta Venkata <sbchin@codeaurora.org>
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
From Lahaina onwards, widebus is enabled for compressed DSI stream.
This change adjusts interface timing parameters to account for widebus.
Change-Id: Ie6b739ed2cdb515064e3a94404b3e0fe07755d7e
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
Reset MDP ctl path and DSI ctl on autorefresh
disable failure. This will enable the hardware
to recover from the hang.
Change-Id: Ia9acc8573c22e0713179ef4f6ef604caacabfadb
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
This change adds logic to align timing engine vsync with panel
tear check if it is supported.
Change-Id: I3f881f392929589848c893f567822b21c0650000
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
Add underrun line count information for each underrun.
Change-Id: I34a740c33240fa8d444f4bbc3b8b014b0282fca1
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Currently the compression ratio is hard-coded to either 2:1 or
3:1 in several places. This is not sufficient for new compression
algorithms as they can support higher compression ratios.
Add support for calculating the compression ratios from the source
and target bpp thereby eliminating hard-coding.
Change-Id: I6383f3d0c781193d0a9ed74df5a95d8e856edb3d
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Add support to configure the DPU pipeline to support VDC-m
topologies.
Change-Id: Ib8ce9a0eaeaa838759fb09cb2ee164d4765e4989
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
This change adds new resource manager api to get number of
ctl paths, interfaces and compression encoders used in the
current topology. This API is required to support both dsc
and vdc encoders and make implementation more generic.
Change-Id: I6cc25e51574cf71cd39f479049572ee7b7e0ead0
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
Switch to watchdog vsync whenever panel jitter is
identified during frame-transfer on command mode display.
This would allow the HW to finish processing the frame
with watchdog vsync source. Switch back to default vsync
source after the frame-transfer is complete. This would
help in the MDP hang issues in panels that generate TEs
with thresholds greater than the projected jitter.
Change-Id: Ic3fa78d90e7f44cb0186857716ac27e72505fd32
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
2 Frames transfer pending is possible with posted start.
One ongoing frame and another triggered frame. Current SW
waits for pp_done interrupt if pending frame count is greater
than 1. It is possible that interrupt may be missed for ongoing
frame. In that case, SW should run pp_done wait for one by one
frame instead of two frames together. It allows encoder to
check the ctl scheduler status and trigger the frame done
event on time.
Change-Id: I4817842292d96747890ee70da8a5bdf9b56816ed
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Handle release fence/frame-done error signalling for
error case like esd failure, pp_done timeout, interrupt
disable on cpu, etc. It fixes the race condition for
pending_frame count update and also triggers correct
wait function for wr_ptr wait failure.
Change-Id: Iad08f20592c97221a1626bb40e607c398a9812b6
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
wr_ptr_irq timeout signifies that the MDP is stuck
on either the current or previous frame. Handle
ctl reset and fence signalling as part of this
timeout handling. This logic would help to recover
the HW faster in case of posted-start.
Change-Id: I09b3d21772df431f9fc4a58b2fd9b4fcac4a7de7
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Existing cwb implementation waits for WB done interrupt in
wait_for_commit_done API call. This serializes the cwb commit
and causes frame trigger delay on primary display. MDSS hw allows
to trigger the cwb frame when previous frame is in-progress. This
change updates driver to allow parallel frame trigger for cwb
enabled display. It releases frame N cwb output buffer in frame
N+1 wait_for_commit done call.
Change-Id: Id4f2a0cc78a3f24a1b5ce96dc907780246768dbf
Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org>
