The original implementation of the "get link status" feature contains
some design and implementation details that are not ideal, so fix the
following deficiencies:
- The link_status_params struct contains three fields that are unused.
- The only link_status_params field that is used, session_id, uses
legacy terminology instead of converged terminology
- The wmi_unified_link_status_req_cmd() implementation uses a void
pointer instead of the correct underlying type for the WMI handle.
Note that change I508ec083298caa45d4cbb1ba28b21e47e379a804
("qcacld-3.0: Align with revised "get link status" Unified WMI") is
interdependent with this change.
Change-Id: I057ca0aff4a627c7fcdb9f90a5da46473813f60a
CRs-Fixed: 2381364
Callback signature in wmi_process_fw_event_default_ctx
is different for WIN and MCL. Make it same.
Change-Id: I28ad8e6068742095bdb9bc265e46dead8bfb217d
CRs-Fixed: 2372980
Currently we have same function name/different implementation when set
wmi scan channel list for WIN and MCL, the implementation for WIN side
send_scan_chan_list_cmd_tlv looks more intuitive which will remain with
minor change.
Remove definition of struct scan_chan_list_params and wmi_channel_param
which is no longer needed. Change HT flag set independent on VHT flag.
Add WMI DFS flag set if channel_param.dfs_set set.
Change-Id: I131ca09c12687bda5eb3eb03b7bcca1d62ac7aa9
CRs-Fixed: 2363675
Change Ie6c4a9847f2daa9ba2aebd17f386d584201b86d6 ("qcacld-3.0: Remove
obsolete set/reset ssid hotlist") in the qcacld-3.0 project removed
the only client of the WMI SSID hotlist infrastructure. Since this
infrastructure is obsolete, remove it.
Change-Id: I4a1de39c982947bbf4958d976426f95e3217f1a3
CRs-Fixed: 2381277
In wlan_cfg80211_scan the number of ssid, ssid length and number of
channels are not checked for max size of array and thus can lead to
Out of bound access of memories.
Fix is to add bound check before copying the params.
Change-Id: Ie6d4e546fb9c884d5988493b611ef7b217f0a95c
CRs-Fixed: 2375217
Per the Linux coding style both mixed-case names and so-called
Hungarian notation are frowned upon, therefore replace the identifier
pAddPeriodicTxPtrnParams everywhere it occurs.
Change-Id: Id80fc4cd22a8e4af125f01b937e03eea0b898283
CRs-Fixed: 2371906
Using both structure wmi_tdls_params and tdls_info if TDLS component
sets FW states, which will cause memory corruption potentially. Use
enum wmi_tdls_state as type of tdls state.
Change-Id: Ia1e78a5c6d8aee9ab5166c0704dd7827f42c2457
CRs-Fixed: 2372452
wmi_unified_bcn_buf_ll_cmd in wmi_unified.h had compilation flag
CONFIG_MCL. To get rid of the compilation flag, a separate header
file is created
Change-Id: I0bbcdf749f461f6880aacc1e3ef4e8e8fdc08ff6
CRs-Fixed: 2366773
Two new WCNSS_qcom.ini values "roam_score_delta" and
"roam_trigger_bitmap" are introduced. These values are sent to
firmware over the WMI command WMI_ROAM_AP_PROFILE over the
structure wmi_roam_cnd_scoring_param. The values to this
structure are populated from struct scoring_params.
Add roam_score_delta and roam_trigger_bitmap in scoring_param.
Populate these values from roam request to the structure
wmi_roam_cnd_scoring_param to be sent over the wmi command.
Change-Id: I012867e60ddf18a276250ef3bd27015f191d8a6a
CRs-Fixed: 2368263
Two new WCNSS_qcom.ini values "btm_validity_timer" and
"disassoc_timer" are introduced. These values are sent to
firmware over the structures wmi_roam_offload_tlv_param and
wmi_btm_config_fixed_param respectively. The values to this
structure are populated from struct roam_offload_scan_params.
Add rct_validity_timer in roam_offload_scan_params.
Populate these values from roam request to the structure
roam_offload_scan_params to be sent over the wmi command.
Change-Id: I6130e9966d520169b0f74b9726d35aa4fef6d81d
CRs-Fixed: 2369040
The firmware sends a new wmi event WMI_ROAM_BLACKLIST_EVENTID
to send the blacklist AP list.
Change-Id: I04fab853efbded48285ac063bb39c64f342c229b
CRs-Fixed: 2369107
Add changes to send bss_load_bss_sample_time over the wmi
command WMI_ROAM_BSS_LOAD_CONFIG_CMDID.
Change-Id: Iab882f0474071458ed8b8876d8edda987b76e94d
CRs-Fixed: 2372167
Populate the load bss trigger configuration values based on the
ini values and send them to firmware.
Add wmi changes to send bss load trigger config to firmware.
Change-Id: Ib2e21904bc7b8d87e5f51824d2694b90a3ac53f2
CRs-Fixed: 2367773
Add host support for db2dbm RSSI changes. Firmware
indicates this capability when underlying hardware
has RSSI reporting feature. Based on this capability
host will know if firmware sends SNR or RSSI. If no
capablity is present then host will convert SNR to
rssi using a fixed offset of -96. If capability is
present host will directly use the rssi as it is.
Change-Id: I9058f16c6280d466feb96cf88a8a0d8cd7b02032
CRs-Fixed: 2364025
Spectral HW time stamp gets reset when a reset happens in
within target. This can potentially result in unpredictable
behaviour during classification. To mitigate this calculated
offset is added to the time stamp value in the FFT report.
HT = Spectral HW timer
AT = Actual time stamp in spectral report
CF = Time stamp correction factor
CT = Corrected time stamp
L = Time stamp in the last FFT report before reset
F = Time stamp in the first FFT report after reset
D = Time gap between the last spectral report before reset
and the end of reset(This is provided by FW via direct
DMA framework)
***Target Reset***
^
|
|<---D---->| time line--->
_______________________________________________________
^ ^ ^ ^
| | | |
HT --> 0 L 0 F
AT --> 0 L F
CF --> 0 0 (L+D)
CT --> 0 L (F+L+D)
Spectral driver corrects the time stamp received from target
using the following formula and sends upwards.
CT(Corrected time stamp) = AT(Actual time stamp) +
CF(Correction Factor)
Calculation of Correction factor (CF):-
---------------------------------------
Initialization : CF = 0
CF += (L + D) (Done only for the first spectral report after reset)
This scheme takes care of the wrap around in the 32 bit time stamp
which would have occurred if the timer was not restarted due to
target reset.
CRs-Fixed: 2356382 2355486
Change-Id: I17b55d39eb91eb03b867bcfddaf3eb03d1fc5d1b
After driver load and interface up, if user changes the country code
and performs the interface down, now if interface change timer expires,
stop modules is invoked. When user again tries to do interface up, as a
part of start modules, update channel list indication comes from FW
with default country info from BDF file which overwrites user specified
country information.
To resolve this issue, if current country is set by user and if
driver gets notification to update channel list from FW with
different country code during restart of wlan modules then ignore
master channel list and send the current user country to FW.
Change-Id: I0a0c57eda03827dc3fef59928569bf2f0bc32634
CRs-Fixed: 2340798
As part of supporting NAN DBS, new WMI TLVs are defined so
that Host can maintain the status of NAN Discovery in sync
with the Firmware. Move the older handlers into the NAN
related files. Also add modules to extract information from
the new TLV's and fill up the event parameters to pass
them to the NAN component. add support for explicitly
disabling NAN due to concurrencies.
Add modules to handle and extract the info from NAN events.
Change-Id: Ic03baaaef45106353c211a813e11e33a90cd41ca
CRs-Fixed: 2338059
As part of the NAN Discovery DBS support, new vendor command
- QCA_NL80211_VENDOR_SUBCMD_NAN_EXT - has been defined that
can carry the binary blob encapsulated within an attribute
and can carry additional attributes to enhance the NAN command
interface. Add the related definitions to support this command.
Add definitions to support the new NAN EXT vendor command.
Change-Id: I83c12c7512066434f8974619e1d953ac78d3a40d
CRs-Fixed: 2339032
Add support to choose the hw_mode_id from FW supported modes. Preferred
mode will be selected if it is not configured in ini params. It is
selected based on the precedence as per capabilities supported by the
mode. For eg., if FW supports DBS and DBS_SBS, DBS_SBS is selected as it
supports three radio compared to DBS's two radio.
This can be overridden by user by setting proper hw_mode_id in ini file.
Change-Id: I162c3a66182882890c416a68f7f64d5149b8f1e5
CRs-Fixed: 2361280
Currently there is no converged wmi_service enum for the
WMI_SERVICE_VDEV_LATENCY_CONFIG.
Add wmi_service_vdev_latency_config as the converged enum.
Change-Id: I90d54ccd507b4267cd7310b4e6e5b1473c7dc41c
CRs-Fixed: 2366187
The original definition of struct wmi_unified_pmk_cache had several
anomalies:
1) It contains an unnecessary tlv_header field. Only the fw-api
structs should contain TLV headers.
2) It contains a mis-named session_id field. Common structures should
use converged terminology, in this case vdev_id
Change If4be27111c604c16ea437aa654210cdff28220a7 ("qcacmn: Refine
struct wmi_unified_pmk_cache (phase 1)") completely addressed the
first issue, and as the first phase of fixing the second issue it
replaced the session_id field with an anonymous union which contains
both the existing session_id field and a new vdev_id field. Being part
of a union these field will overlay each other.
qca-wifi-host_cmn change Ie8cc453751b95c332e3df32794506a4bd3c324ad
("qcacmn: Refine struct wmi_unified_pmk_cache (phase 2)") and
qcacld-3.0 change Ief4bcb819cb3c842adb74904f2cb2483476eaeb9
("qcacld-3.0: Use the refined struct wmi_unified_pmk_cache") replaced
all references to session_id with references to vdev_id.
For phase 3 remove the anonymous union introduced in phase 1, leaving
just the vdev_id field.
Change-Id: Ic5a274b9e2e8e603eef801a9d6422f55829f9735
CRs-Fixed: 2363432
The current definition of struct wmi_unified_pmk_cache has the
following anomalies:
1) It contains an unnecessary tlv_header field. Only the fw-api
structs should contain TLV headers.
2) It contains a mis-named session_id field. Common structures should
use converged terminology, in this case vdev_id
To fix the first issue just remove the tlv_header field since it isn't
used. To fix the second issue takes a phased approach. For phase 1
replace the session_id field with an anonymous union which contains
both the existing session_id field and a new vdev_id field. Being part
of a union these field will overlay each other.
Subsequent phases will replace session_id references with vdev_id
references, and then remove the union, leaving just the vdev_id field.
Change-Id: If4be27111c604c16ea437aa654210cdff28220a7
CRs-Fixed: 2363430
Add WMI support to send WMI_PEER_UNMAP_CONF_CMDID to FW
for peer unmap confirmation.
Change-Id: I1a260f840ed28f90568d9cba912cc5e5128c8c7d
CRs-Fixed: 2358066
This FR is to enhance existing pktlog debug tool
This feature will allow to capture pktlog for particular
peer mac address.
Change-Id: I3676095536185f25b0d498e03f70246260a324fd
the enum for subchannel marking pdev param is after the
maximum value. Re-enumerate the enum so that the pdev param max
points to the last value.
Change-Id: I9ecf616a13b3b73b3aafb0f6dfdfbf6eda29f4dd
CRs-Fixed: 2334258
When CONFIG_MOBILE_ROUTER is enabled there are build failures
due to improper featurization of NAN, so fix the featurization.
Change-Id: I6bc11fb82394c2d32b328cb5d50ff974051755e1
CRs-Fixed: 2353170
Introduce a new wmi_send pdev param to enable/disable
"Subchannel Marking" in Firmware (only in Full Offload)
Change-Id: I3cd4f4f13ebca72c4505b6195cc8dc4856d41671
CRs-Fixed: 2334258
Current HTT_H2T messages from host driver does not have
consistency in message length set by host driver. Some
message types include HTC header length also within the
message length, while other types have message length
itself only, which causes difficulty in handling message
length in FW.
Change-Id: I885a21530a2d8f852387ae54cf7ee0751aad2516
CRs-Fixed: 2345075
Remove the unused fields from WMI unified vdev_start_params structure.
The channel information duplicated in vdev_start_params and
it sub structure channel is removed and all implementations
can use the channel sub structure directly.
Change-Id: I47cf4c4223111b6f564ec8336dbfcda4592e8e0c
CRs-Fixed: 2350505
Add flags WMI_HOST_FW_FEATURE_VOW_FEATURES and
WMI_HOST_FW_FEATURE_VOW_STATS which will be sent
to firmware to enable VOW stats.
Change-Id: I7829327ac21406af309f21b79f9f040687997275
CRs-Fixed: 2340765
Adding two members including tx sgi_count in
host peer_extd_stats structure which is received from
the fw and populated to upper layer along with adding two
members to cdp_rx_stats.
Change-Id: Id45b2d0042d01771ac74a906d72c369c3dc31394
CRs-Fixed: 2147922
Requirement to provide various msdu retry stats to host:-
1. successfully transmitted msdus
2. Retried msdus
3. msdus retried for more than once
4. failed msdus
Change-Id: I4cd7dfceae16b4223df605fa174299858a8651c8
1. Send add random mac addr rx filter WMI command
to target
2. Add/Del the active random mac addr entry
3. Clear random mac addr from target if not active
Change-Id: I9dcbdc20b76d9865da7a8db6ee013bf5e44e4407
CRs-Fixed: 2322097
Provide WMI support for AP channel switching enhancements.
As part of FR50393, AP is provided with the ability to notify
capable connected peers to follow it to the new channel bandwidth.
This change provides WMI support for sending required parameters to
the firmware to update the peer list internally with the MAC address
of the capable peer along with it's new channel width.
Change-Id: I0696efd2b1c883d15de23364677050618f114743
CRs-Fixed: 2316625
