This feature enables user to change HW mode dynamically
from DBS to DBS_SBS mode and vice-versa. Currently, HW
mode configuration is only possible through INI setting
requiring a subsequent reboot.
Relevant WMI changes are:
1. Relocate API wmi_unified_soc_set_hw_mode_cmd from
wmi_unified_sta_api.c to wmi_unified_api.c
2. Define API wmi_unified_extract_hw_mode_resp to extract
FW response
3. Parse and store new dev-cap fields wireless_modes,
low_2ghz_chan_freq, high_2ghz_chan_freq, low_5ghz_chan_freq,
and high_5ghz_chan_freq.
Change-Id: I49f975e7c5abc8503b651a3ebd4d56b23af915db
CRs-fixed: 2490212
Support to Enable/Disable multi group key and configure
maximum number of group keys.
Change-Id: Ie6ce2a38d0ad04a47f966fc281f35a8af7125447
CRs-Fixed: 2490599
VLAN group keyix is greater than WLAN_CRYPTO_MAXKEYIDX
Each VLAN will have separate group key in single VAP.
CRs-Fixed: 2490599
Change-Id: I585b2deaa13da337c5df7b55ec8e4672221e4edb
Add WMI pdev param to wmi_unified_sed_pdev_param command. This adds
support to enable spatial reuse on a per access category basis.
Change-Id: I501f2a18c2eb7245f4d6c1be253e1b08a3de8bd6
CRs-Fixed: 2502282
Because newest firmware codes already been changed, the previous
coex configure command are invalid. Firmware need host driver
to enable WMI_SERVICE_THREE_WAY_COEX_CONFIG_LEGACY service during
wlan init. Add a new parameter "gThreeWayCoexConfigLegacyEnable" to
initial config file. If this parameter value is zero,set coex
priorities command will return error.
Change-Id: Ief1617e2ba5363e276c55135198613a0e54b71d5
CRs-Fixed: 2482742
Add support to read the RF characterization WMI event
and parse each individual TLV containing the channel's
center frequency, bandwidth and RF characterization
metric.
Also, remove the support for reading the RF
characterization metrics from the extended
service ready WMI event.
Change-Id: I560583f9304005282c09a27f47c8d5c2778b1645
CRs-Fixed: 2487415
WMI functions called from target_if are present at WIN code. So these
wmi changes are moved to common code, so that MCL and WIN both use.
MCL needs this wmi code for target_if vdev conversion.
Change-Id: I6f3653ea0fad14f3cdbb32a8dc65e5146ce0a5c8
CRs-Fixed: 2492577
Use CONFIG_WMI_BCN_OFFLOAD instead of CONFIG_MCL to
include wmi_unified header file.
Change-Id: I0cc7a4958700c82c7d3e55c965ccac2451b64fd3
CRs-Fixed: 2490681
Remove CONFIG_MCL for Beacon buf send WMI command APIs.
And move them under WLAN_WMI_BCN.
Change-Id: Ie5053334bd7498cb9dd84dbc515ffd3414a4ad32
CRs-Fixed: 2483567
This command is used to send OEM data binary blobs
from application/service to firmware.
Change-Id: Id806638bf8c53c65b32177969d965290da5701b9
CRs-Fixed: 2477337
Add WMI support for vdev delete all
peer request which will replace individual peer
delete of peers under a vdev during vdev down.
Change-Id: Ia41ae5fbf96a75d2a3e608564742d2a43e0ed2cc
CRs-Fixed: 2456858
Add changes to remove usage of void pointer for wmi_handle
Instead use an opaque pointer(set 2)
Change-Id: I06a89adaf15c6b398dbc901518aa83927b7ca16a
CRs-Fixed: 2479298
Add changes to remove usage of void pointer for wmi_handle
Instead use an opaque pointer(wmi_handle_t)
Change-Id: I7c6dce564f34352c75e0b9d0c90591de625f1959
CRs-Fixed: 2479299
Set HE capability support in scan channel list command to enable
HE IEs probe request frames.
Change-Id: Ia8836f033ee010ba21f82fdc21da5085e70bc0a4
CRs-Fixed: 2478069
Featurize PKTLOG cmd handle under feature flag FEATURE_PKTLOG
as part of CONFIG_MCL cleanup.
Change-Id: Iae8c7e7caad001d7d37a8e17c1eb892f96009066
CRs-Fixed: 2467198
Propagation from qcacld2.0 to qcacld3.0.
The WMI CMD and EVENT of "get antenna isolation" are already defined,
but not used before in qcacld3.0.
Now, The host driver uses vendor command to get this information
instead of iwpriv command in qcacld-2.0.
The attribution of this feature is already defined in file
"qca_vendor.h". The name is "QCA_WLAN_VENDOR_ATTR_ANTENNA_ISOLATION".
So host driver will use vendor command
"QCA_NL80211_VENDOR_SUBCMD_GET_HW_CAPABILITY" to get the information
from lower layer.
Change-Id: I915768f622ddc9a70a95ce4fe952f19917a8f901
CRs-Fixed: 2447363
Add 165MHz support to wmi_host_channel_width to keep in accordance
with the wmi_channel_width structure in wmi_unified.h
Change-Id: Ib8aea0bc725a1c43b8fb7510cf86da4633143f69
CRs-Fixed: 2463171
Clean up of CONFIG_MCL and optimise memory of peer_assoc_param
structure by use of bit fields instead of bool type
Change-Id: I4b06af69b7fd9af981a250c881d163ddb1f68fa7
CRs-Fixed: 2450763
Add WMI commands:
1) WMI_PDEV_PARAM_SET_MGMT_TTL
Enable/Disable/Set MGMT_TTL in milliseconds.
2) WMI_PDEV_PARAM_SET_PROBE_RESP_TTL
Enable/Disable/Set PROBE_RESP_TTL in milliseconds.
3) WMI_PDEV_PARAM_SET_MU_PPDU_DURATION
Set global MU PPDU duration for DL (usec units)
4) WMI_PDEV_PARAM_SET_TBTT_CTRL.
Set TBTT CTRL value BITS 0 - 2
(refer to WMI_TBTT_CTRL_CFG enum)
Change-Id: Iedda500fdb7bdedcc11fef31f0b29ad3f1812a43
CRs-Fixed: 2415745
Channel RF info contains metrics that signify the throughput
availability of all the supported channels. This information
is sent in as discrete TLVs (per channel) as part of the WMI
extended service ready event.
Each TLV contains the frequency, bandwidth represented and
the actual channel metric.
Add support to read the above-mentioned TLVs from the extended
service ready event
Change-Id: If947e179c1ca41466997cc48840a8d36b6236780
CRs-Fixed: 2441921
Add interface API to send reject ap list to FW,
also add the blacklist manager UMAC, and QDF component
for the same.
Change-Id: I826e537683441762043003d71dc2b79ceebebbcb
CRs-Fixed: 2460770
Implement the interface to transfer the info between
host driver and firmware about the ap which has interop
issues with the DUT. It is detected by firmware and
forwarded to user sapce for persistent storage. User
space configs these APs to firmware when the DUT
starts up next time.
CRs-Fixed: 2425197
Change-Id: I3857d2a605baa2673af333a7a0412f1690b59769
Convert host param id to target param id using arrays
instead of switch case. This enables removal of CONFIG_MCL
compile time macro and use specific macro
ENABLE_HOST_TO_TARGET_CONVERSION for conversions
Change-Id: I223141d47e92521e6600fc0e160ab2deef43d7d2
CRs-Fixed: 2418030
Currently, If invalid pdev_id is passed to
convert_target_pdev_id_to_host_pdev_id it results into Assert.
Fix is to remove QDF_ASSERT(0) in convert_target_pdev_id_to_host_pdev_id.
Return WMI_HOST_PDEV_ID_INVALID if convert_target_pdev_id_to_host_pdev_id
receives invalid pdev id.
Change-Id: Icb6a75c3f3664596fbba4532f5b29ed626ba28f2
CRs-Fixed: 2428787
The target advertises adaptive 11r service capability over
WMI_SERVICE_ADAPTIVE_11R_ROAM. Enable RSO for adaptive 11r
connection only if firmware advertises this service capability.
Change-Id: Iea78b63d19d1177fe092fc9916ddc5280d00de4b
CRs-Fixed: 2441975
With this feature, using appropriate commands, link layer, network layer,
transport layer and some of the application protocols can be tagged with
the user provided tag values for easier identification of protocols. The
supported protocols today are as follows.
ARP, DHCPv4, DHCPv6, DNS over TCP (v4), DNS over TCP (v6), DNS over UDP
(v4), DNS over UDP (v6), ICMPv4, ICMPv6, TCPv4, TCPv6, UDPv4,
UDPv6, IPv4, IPv6, EAP.
Receive packets are tagged by hardware. Tags are applied after the first
matching rule. Hence it is recommended that the rules are
programmed in such a way that tags are configured from application layer
to data link layer to get expected results.
Change-Id: Ibdc2bd2b78234f482074955e89fb93f05988eaca
Host driver sends pmk key over psk_msk buffer on the
wmi_roam_11r_offload_tlv_param fixed param.
For SHA 384 based FT AKMs, the xx_key length will be higher than
32 bytes. So new psk_msk_ext array is introduced at interface
to sent the remaining 16 bytes.
Fill the last 16 bytes of xx_key to psk_msk_ext for FT
sha384 based AKMs.
Also add support for FT-SAE, FT-SuiteB and FT-FILS firmware
service capability also. If the firmware doesn't advertise
support for FT-SAE or FT-SuiteB or FT-FILS, firmware roaming to
that AP will not be enabled.
Change-Id: Ibe64fb346a24962e59ca461c3099270d8766adc5
CRs-Fixed: 2400773
Add command support for NAV register update and
configuration of the threshold value.
Change-Id: Idbdb030f75dc98db652e6b53604a3ceaaff1106b
CRs-fixed: 2389803
The below ini values are added to enhance roaming in firmware:
1. "minimum_btm_candidate_score"
2. "roam_scan_inactivity_time"
3. "roam_inactive_data_packet_count"
4. "roam_scan_period_after_inactivity"
5. "btm_roam_score_delta"
6. "idle_roam_score_delta"
7. "btm_roam_trigger_min_rssi"
8. "idle_roam_trigger_min_rssi"
The values of "roam_scan_inactivity_time" ,
"roam_inactive_data_packet_count" and
"roam_scan_period_after_inactivity" will be sent over the
WMI_ROAM_SCAN_PERIOD wmi command.
"minimum_btm_candidate_score" value will be sent in the
WMI_ROAM_BTM_CONFIG_CMDID command.
The values of "btm_roam_score_delta", "idle_roam_score_delta"
"btm_roam_trigger_min_rssi" and "idle_roam_trigger_min_rssi"
will be sent over the WMI_AP_PROFILE command in new tlv.
Add WMI support to send the introduced ini values to
firmware.
Change-Id: I117ed7490d14730423654513f416115822230486
CRs-Fixed: 2435676
Send idle roam trigger monitor command to firmware based on
the SET SUSPEND mode command received from the user space.
The set suspend mode value sent will be used by firmware as
one of the parameters in determining if the device is in
idle state. When set suspend mode is 1, device is not in
idle state else the device is considered idle if idle state
data packet count, idle rssi, inactivity time criteria are met.
Add changes to send the idle trigger monitor value over the
wmi command WMI_IDLE_TRIGGER_MONITOR_CMDID.
Change-Id: I34632814a1e653fa87cfbab90c72ee1622dfd63c
CRs-Fixed: 2436222
Add wmi service bit: wmi_service_sta_plus_sta_support.
When this wmi service bit is set, firmware shall support simultaneous
connections on multiple STA interfaces.
If firmware doesn't set this service bit and if the host driver
doesn't check this bit before second STA connection, then firmware
shall reject connection by returning failure in VDEV_START_RESP_EVENTID.
Change-Id: I9e20911af5372b651586f25d9f13e4364c672435
CRs-Fixed: 2427202
