Replace blacklist/whitelist with denylist/allowlist for
blacklist manager component. and replace blm with dlm.
Change-Id: I8dec146d8cb3b61dc891b72bea44704b8ab733fe
CRs-Fixed: 3087575
When wmi_roam_synch_frame_event receieved from firmware, memory is
malloced to save probe rsp/reassoc req/reassoc rsp once extract event,
when copied to vdev rso_cfg->roam_sync_frame_ind, memory is malloc again,
and original memory isn't freed, memory leak happens.
To fix it, assure memory is only malloced once to save
probe rsp/reassoc req/reassoc rsp when handle wmi_roam_synch_frame_event.
Change-Id: I6b31378bcf624547fca9fd858268252fd22f533d
CRs-Fixed: 3107576
Add support to send qos null frames received from firmware on
STA interface to mon interface based on config value. The config
value get update based on vendor command set by user.
The packet filter check in ucfg_pkt_capture_process_mgmt_tx_data
moved to target_if_mgmt_offload_data_event_handler. So that we
will not allocate any buffer if filter is not set.
Change-Id: I426b340c5a65711ada971062af95ae039d18d0bd
CRs-Fixed: 3076241
During SAE roam auth offload, update the beacon/probe response
frame coming from the FW via WMI_ROAM_FRAME_EVENTID into the
scan db.
When the bss info of the preauth candidate is unavailable in
the host/kernel scan entry, supplicant fails to determine the
proper SAE PWE config of the peer and the commit request fails.
Change-Id: Ia782ece7bebf8274f949fe9fb3b2a2882bf47597
CRs-Fixed: 3075458
Currently memory allocated for structure roam_pmkid_req_event
is freed in two places causing usage after free.
Fix is to free memory only once in
target_if_pmkid_request_event_handler api.
Change-Id: Idc70e8437f89cb1cf4f6d35f924085409994714a
CRs-Fixed: 3064667
For allowlist roaming, EAPOL isn't offloaded for PMK changed, then
RSO is stopped and allowlist ssid is cleared in F/W, but when RSO
is restarted after EAPOL finished, allowlist ssid isn't reset to F/W,
so allowlist roaming will fail after that.
To fix it, when roam start or update cmd is sent to F/W: update
allowlist ssid and denylist to F/W.
Change-Id: Ia8ddc251767dfc04d9a6cfd1e7c1074ab0e88e96
CRs-Fixed: 3081226
Current only TYPE_STATION_STATS is designed to be send
by qmi. and other request type should send by wmi.
if sending by qmi, qmi_get/qmi_put should be call to protect
qmi send and qmi response.
Change to check type and only allow TYPE_STATION_STATS to be
send by qmi.
Change-Id: I57b0bdb6717e259606993ea24ef024745a456664
CRs-Fixed: 3073744
Support to deliver below mlme event to SON:
MLME_EVENT_VDEV_STATE,
MLME_EVENT_INST_RSSI,
MLME_EVENT_TX_PWR_CHANGE.
Change-Id: I0535d80cea155f5b94abecfa609d34940e57cdd7
CRs-Fixed: 3054810
Add new vendor command to enable the roam events stats from the
driver/FW in both resume and suspend mode.
New roam param is introduced to indicate the FW to enable/disable
the roam stats using the new roam set command.
Change-Id: I6d04f0946e6735613a4cf3d4361bf31052314fa0
CRs-Fixed: 3036518
Currently, target_if forwards the blacklist event to upper layers
even if there is no AP info present. This event can be dropped in
target_if to avoid accessing unallocated memory.
Change-Id: Icfaabb0a8e3304882979ffde7f5cd27fd4c8a067
CRs-Fixed: 3057424
Currently WMI_DBGLOG_TIME_STAMP_SYNC_CMDID command sent
every 1 sec causes RTPM collapse and inturn has power
impact. So to avoid this enable time of the day synchronization
only after connection/roaming.
Send WMI_DBGLOG_TIME_STAMP_SYNC_CMDID as part of RSO
start command.
Change-Id: Iee3cefe1318a6e5507a43cefb9666cc2a439fe06
CRs-Fixed: 3060762
FW may experience HWDTIM mode enter and exit, if HOST can't queue
frames fast enough, this will bring 10ms latency for TX under WoW.
This change adds an indication bit to notify FW whether a TX happens
after WoW wakeup, then FW can discard HWDITM and reduce TX latency.
Change-Id: I74f7311fc0639186ee0bca711160bb8c0d5d9fb3
CRs-Fixed: 3055501
Add support to offload icmp feature to fw in case of
suspended state to avoid high power consumption.
Change-Id: I3ff19d71eac530c75be57e6b52b975e755ff2a53
CRs-Fixed: 3042452
wma to target_if convergence code is guarded under the feature
flag ROAM_TARGET_IF_CONVERGENCE and it's is enabled currently.
Remove the flag usage and remove the deprecated code(else part)
also.
Change-Id: I6973d9c366ec6a9c6164dd19f6f4775dd3ebf5f0
CRs-Fixed: 3049942
Add tgt support in packet capture component to send user
configured beacon report interval to FW.
Change-Id: Ibeb9f9a7f9ad2c2afa6929c492bd1029784b5f9e
CRs-Fixed: 3046224
In packet capture component add support to send ctrl and beacon
frames config to FW based on frame filter received from user through
vendor command.
Change-Id: Ie45ea2135e237a156fb60663e3f85cc601490e4a
CRs-Fixed: 3046222
Currently, the ROAM event is posted to scheduler thread when it's
received from firmware. This is done to avoid processing the
complete event in IRQ context as the same callback gets called
from IRQ context for WOW events(WOW_REASON_LOW_RSSI and
WOW_REASON_HO_FAIL). Posting the ROAM event to scheduler
thread may introduce some additional delay in processing it back
as there would be a context switch.
If this ROAM event carries ROAM_START which is followed by a
ROAM_SYNC event, there is chance to process the ROAM_SYNC
before ROAM_START as ROAM_SYNC would be processed in the same
context whereas ROAM_START needs a context switch. This results
into an invalid connection manager state after processing
ROAM_START event, which results a connection failure.
Same is applicable for ROAM_PMKID_REQ_EVENT and
ROAM_VDEV_DISCONNECT_EVENT. Avoid reposting the same to scheduler
thread.
Change-Id: Ic4fc1b3baf12e4ceee9a0975ebfee77fb88ab6f0
CRs-Fixed: 3033657
Send additional roam trigger TLV for BTC in
WMI_ROAM_ENABLE_DISABLE_TRIGGER_REASON_CMDID
command, to support a new roaming trigger
"WMI_ROAM_TRIGGER_REASON_BTC".
Change-Id: Ib767bd6bcf005c187b0fb58986ad287fe8753c1b
CRs-Fixed: 3009788
target_if expects psoc as part of roam events which is used for
event extraction. Send the same as it's missing currently.
Change-Id: I04729df90d8e64e07427fe47926a8a92a24aaf23
CRs-Fixed: 3027055
Currently, wmi_roam_pmkid_request_event_id data is extracted and
processing is also done in wma. This is not inline with component
model where target_if takes care of data extraction and handover
the extracted data to corresponding component(connection mgr in
this case). Add changes to support the same.
Change-Id: I3fad4e4d7ceeb85c632723e161809bf980d5375f
CRs-Fixed: 3014248
Currently, wmi_roam_auth_offload_event_id data is extracted and
processing is also done in wma. This is not inline with component
model where target_if takes care of data extraction and handover
the extracted data to corresponding component(connection mgr in
this case). Add changes to support the same.
Change-Id: I128db23077d423c5e5ecf27636bc3af35cbbc58f
CRs-Fixed: 3010419
Add support for sending WMI_REQUEST_THERMAL_STATS_CMDID
to request for the thermal stats via vendor cmd:
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_THERMAL_STATS
This vendor cmd can either be used to clear the thermal
stats or to request for the thermal stats.
Added ini gThermalStatsTempOffset, which can
configure thermal temperature offset value for capturing
thermal stats in thermal range such as Thermal STATS
starts capturing from temperature threshold to temperature
threshold + offset.
If this ini is set to 0, then the events are disabled.
Also, add support for the FW event where the requested
thermal stats are sent in FW event
WMI_THERM_THROT_STATS_EVENTID().
The following attributes are sent in the events for every
level:
STATS_MIN_TEMPERATURE
STATS_MAX_TEMPERATURE
STATS_DWELL_TIME
STATS_TEMP_LEVEL_COUNTER
Change-Id: If8acdeec5bde33be346332ccaf39d78d0151203d
CRs-Fixed: 3016818
Currently, wmi_roam_stats_event_id data is extracted and
processing is also done in wma. This is not inline with component
model where target_if takes care of data extraction and handover
the extracted data to corresponding component(connection mgr in
this case). Add changes to support the same.
Change-Id: I5e336b01e1a2183e49b3e6eeb125c7c9fd0fd73c
CRs-Fixed: 3003125
The purpose of the multicast Domain Name System (mDNS) is to resolve
host names to IP addresses within small networks that do not include
a local name server.
It utilizes essentially the same programming interfaces, packet formats
and operating semantics as the unicast DNS, and the advantage is zero
configuration service while no need for central or global server.
Based on mDNS, the DNS-SD (Service Discovery) allows clients to discover
a named list of services by type in a specified domain using standard
DNS queries.
Here, we provide the ability to advertise the available services by
responding to mDNS queries.
Change-Id: Id2a0468d49237c21062cfd1988e34903658cdad9
CRs-Fixed: 3008549
This reverts change Id8134003e6f7a3e0368b20c496f650e0b7025b9e
Moving cp stats to scheduler thread is breaking the
synchronization in stats collection. Currently, when a get stats
command is issued from framework, host driver sends the same to
firmware and wait for both llstats and get_station related stats.
The expectation is to receive get_stats first and then llstats.
Host driver has a wait for the last llstats event to return the
stats to userspace. As the cp stats(get_station stats) are moved
to scheduler thread, the order of these events can't be ensured
as llstats are still running in kworker thread. llstats event gets
processed before cp stats mostly and stats are returned
immediately to framework. Framework may issue the get stats
command again and the same is sent to firmware, which may result
in synchronization issue in firmware as well.
Moving llstats also to scheduler thread may not be optimal as these
are aggressive and can be queried by framework multiple times with
a milliseconds gap.
So, move back the cp stats to kworker thread to maintain
synchronization.
Change-Id: I8dc518f0de37e7cc203cb1f6e67045d74b304d93
CRs-Fixed: 3002534
Currently, wmi_roam_scan_chan_list_id data is extracted and
processing is also done in wma. This is not inline with component
model where target_if takes care of data extraction and handover
the extracted data to corresponding component(connection mgr in
this case). Add changes to support the same.
Change-Id: I8f59f9ebfe1bbdc7ef37ccc1f10178fe8128e912
CRs-Fixed: 2990376
Currently, wmi_vdev_disconnect_event_id data is extracted and
processing is also done in wma. This is not inline with component
model where target_if takes care of data extraction and handover
the extracted data to corresponding component(connection mgr in
this case). Add changes to support the same.
Change-Id: I2486cc3f63c4b35305b60ac55cd0a622c7185323
CRs-Fixed: 2990373
Currently, wmi_roam_blacklist_event_id data is extracted and
processing is also done in wma. This is not inline with component
model where target_if takes care of data extraction and handover
the extracted data to corresponding component(connection mgr in
this case). Add changes to support the same.
Change-Id: I41d2ef6c228acd8f86f24107c02d11f1a8ac6dea
CRs-Fixed: 2990369
Currently, wmi_roam_event_id data is extracted and processing is
also done in wma. This is not inline with component model where
target_if takes care of data extraction and handover the extracted
data to corresponding component(connection mgr in this case).
Add changes to support the same. As the legacy CSR/LIM is not
yet converged, have a wrapper from connection mgr to wma to call
these legacy APIs.
Change-Id: I0e22bbccfe21200b90771a01f9ee7454f4ecb119
CRs-Fixed: 2990355
Extend hdd_config_modulated_dtim() to configure moddtim
dynamically in the both non li offload and li offload mode.
Change-Id: I8669ec618d4aa9cd87c4c234972ca500c98119b6
CRs-Fixed: 2970090
Add function to populate the rx average rssi received from target in
pkt_capture vdev_priv structure. The rx average rssi is received in
wmi smart monitor event.
Change-Id: I9206669b418a2245bb8d53920040fddea77ce06c
CRs-Fixed: 2969242
Register handler for wmi smart monitor event in packet capture
mode in lithium. Currently, wmi smart monitor event provides
average rssi of last ten received data packets.
Change-Id: Ieeea5cbef328b04f139f54e7a42d52a3cf25824b
CRs-Fixed: 2969245
Return success when firmware doesn't support 11k offload, or else
subsequent roaming related wmi commands have no chance to issue.
Change-Id: I69d55cca63f2b7ab4787295a2825159395cf2a11
CRs-Fixed: 2976163
Provide ucfg api to configure qos null and trigger frames.
Ucfg api will send configuration to FW. Below configuration values
are allowed.
PACKET_CAPTURE_CONFIG_TRIGGER_QOS_DISABLE: disable capture for
trigger and qos frames.
PACKET_CAPTURE_CONFIG_TRIGGER_ENABLE: enable capture for trigger
frames only.
PACKET_CAPTURE_CONFIG_QOS_ENABLE: enable capture for qos frames only.
PACKET_CAPTURE_CONFIG_TRIGGER_QOS_ENABLE: enable capture for both
trigger and qos frames.
The packet capture config old value will be over written by new value.
For example, first if we configure value as
PACKET_CAPTURE_CONFIG_TRIGGER_ENABLE and then if we send config as
PACKET_CAPTURE_CONFIG_QOS_ENABLE then config is enabled only for qos.
Change-Id: I02dcd4372c7194ec3e477694ad0e2c045fe6c942
CRs-Fixed: 2967824
Firmware sends NAN log events to driver and these are logged
with info level to capture complete NAN state machine logs in kmsg.
Currently, these events are received/processed in soft IRQ context
and causes performance issues as logs introduce delays. Move the
event registration to RX_WORK context to avoid delays.
Change-Id: I15ba20059f55f002cfe276d62e68e3cc09136a23
CRs-Fixed: 2960359
Existing INI disable_4way_hs_offload is defined as a boolean
that controls the EAPOL Handshake to be offloaded to Firmware or
Not. There is no way to specify the EAPOL offload per AKM.
Hence extended the support of EAPOL handshake offload to firmware
per AKM by converting this INI to a bitmap integer.
With ini value as 0 by default Firmware takes care of 4-way HS
during roam for all AKMs except for SAE and OWE. If
this ini value is 1 then Host takes care of EAPOL for all AKMs.
Having the backward compatibility, added a new value to ini.
If this ini value is set to 2 and also if the SAE EAPOL offload
service bit is set by Firmware then the behavior is same as ini
with 0 except that Firmware takes care of 4-way HS for SAE roam
as well. And for OWE it is still handled by supplicant.
To achieve this, new roam offload flag is introduced to indicate
Firmware about SAE roam EAPOL offload, So that in Roam sync
indication Firmware will inform the status as connected but not
authenticated so that supplicant can take care of 4-way EAPOL HS.
Change-Id: I8b65a1768fad91fac7e427712d3ccf4586176f5f
CRs-Fixed: 2955029
Currently, cp stats are received through kworker thread context.
This causes race conditions/out of sync issues if any common data
structures are handled in parallel in scheduler thread context.
There is no need to receive the cp stats on kworker thread as per
current design. So, move the cp stats event handling to scheduler
thread to avoid any race conditions.
Change-Id: Id8134003e6f7a3e0368b20c496f650e0b7025b9e
CRs-Fixed: 2928876
offload igmp feature to fw in case of suspended state
to avoid high power consumption.
Change-Id: I05fbf23dc2836f8f5dc6e2f45b35bf2d30c39790
CRs-Fixed: 2907644
