Currently QDF_MAX_NUM_CHAN and NUM_CHANNELS aren't aligned, this unalignment
may cause many potential OOB access. So replace QDF_MAX_NUM_CHAN with
NUM_CHANNELS to keep unified.
Change-Id: I7bf7829d776f7caf5b2afbd2c9fd0c20d608e630
CRs-Fixed: 2644073
The FW has updated the wmi command wmi_vdev_adfs_ch_cfg_cmd_fixed_param to
configure the Agile channel to enable the 165MHz channel as an Agile
channel by enabling 2 center frequencies.
For a 160MHz and 80MHz channel, the parameter center_freq1 will be the
center of the respective channels. For the 165MHz channel(restricted 80p80)
the parameter center_freq1 will be the center of the left 80MHz channel
(5690MHz) and the parameter center_freq2 will be the center of the right
80MHz channel (5775MHz)..
Update the ADFS parameters across UMAC, TARGET_IF and WMI layes to
update the Agile channel configuration command.
Change-Id: Ie480af9a6bb8dad87dd783ab06e17b449605b1c9
CRs-Fixed: 2642555
Introduce constants for building the 160MHz precac tree.
Add support to insert the 165MHz channel into the precac tree.
The precac entry is not restricted to be 80MHz bandwidth, it can be
20/40/80/160/165MHz, therefore introduce a new variable bw to
accommodate different bandwidths.
Change-Id: I57d1e2173712b54238f89079783f27ef591921d1
CRs-Fixed: 2647246
Provide support for bangradar with detector ID as one of the parameters.
Add the parameter as part of the packed arguments to be sent to FW.
Also add APIs for basic sanity check of bangradar params and packing
bangradar params inside an 32 bit unsigned integer.
CRs-Fixed: 2646549
Change-Id: Ie781bc9421b7ac0d407eb01814c9242c7f988884
According to Annex E of 802.11 specification (Table E-1—Operating classes
in the United States) add opclass support for HT40 channel 140 and
144 in us_op_class map. Currently for HT40 channels 140 and 144,
us_op_class map does not have a valid entry and hence opclass is
fetched as 0.
CRs-Fixed: 2626714
Change-Id: I848d6266c829c363f353de9911359349c379126b
Currently vdev private data osif_priv gets allocation
separately and requires to be de-alloc separately.
This de-alloc needs to be taken care at different places
based on the vdev create failure or whenever vdev is freed.
As vdev private data is associated to the vdev and needs to
be freed if vdev is not there, it is good to allocate this
private data along with vdev so that there is no need
to maintain allocation and de-allocation of vdev priv data
separately.
As part of this change alloc the vdev priv data along with
the vdev allocation as a single memory and free of the vdev priv
data will be taken care as part of vdev free.
Change-Id: Ib442958c2d8684706830782d339c589c5f5daddf
CRs-Fixed: 2636222
Host driver processes cld80211 vendor subcmd
CLD80211_VENDOR_SUB_CMD_OEM_DATA and send
response in NLA format. Peer status indication
is also sent in nla format
CRs-Fixed: 2597282
Change-Id: I94f1fb7939141952ef92dbb7d3a130ba20d31608
Host driver processes cld80211 vendor sub command
CLD80211_VENDOR_SUB_CMD_GET_CH_INFO and respond with
NLA type CH_INFO response
CRs-Fixed: 2595374
Change-Id: Ibe6f2431ac1cae6e4560ec11424434b4f1cf8b76
Host driver processes cld80211 vendor sub command
CLD80211_VENDOR_SUB_CMD_GET_CAPS and respond with
NLA type CAP response
CRs-Fixed: 2595140
Change-Id: I5a6aa1fac537ca618404520b81c541a20dafd6fb
Add RX Op function to update the FD template in case of
any updates to the FD frame parameters.
CRs-fixed: 2637082
Change-Id: I1d7b488d177a32ddc57129f227df26d5774aa9e1
When staDFSEn option is enabled in the UCI, radar detection fails on a
STA VAP.
In the function vdev_mgr_start_param_update,since there is a condition
check for QDF_SAP_MODE and QDF_P2P_GO_MODE, the
tgt_dfs_set_current_channel_for_freq function does not get calledin case
of STA opmode.
As a result, DFS flag does not get set for the dfs->dfs_curchan,
and DFS_RADAR_EN flag does not get set for dfs->dfs_proc_phyerr.
Therefore, within the function dfs_process_phyerr, the function returns
without processing the radar pulses.
To fix this issue, add a new function
vdev_mgr_check_opmode_and_des_chan_freq under a macro
QCA_MCL_DFS_SUPPORT. If QCA_MCL_DFS_SUPPORT is defined, check the opmode
of the vdev, and frequency band of des_chan_freq. If QCA_MCL_DFS_SUPPORT
is not defined, return true.
Change-Id: I66fe3d4ccc0b75b70652b04f9bf93b199268f1fa
CRs-Fixed: 2640208
Enhance logs for PNO scan to remove duplicate
or unwanted prints and keep only useful logs to debug.
Change-Id: Ibe24714e925a00933911c801685528849e160480
CRs-Fixed: 2636641
When the operating class 82 is given as an input to the function
reg_get_band_cap_from_op_class, it is not found due to an
incorrect conditional logic that checks the starting frequency of a
band.
To address this problem, add a function
reg_get_band_cap_from_chan_set and call it within the function
reg_get_band_cap_from_op_class, to check if a channel in the channel
set, is within the frequency range of the band.
Change-Id: I7cbd8decf3c19f80e60a3153529b622b144feac9
CRs-Fixed: 2636367
The default value provided for the INI item
gScanProbeRepeatTime for WIN is 50 which is
beyond the specified INI range 0 and 30.
Changing the max value to 50 to accommodate
the default value used by the INI and avoid
warning while parsing INI values.
CRs-Fixed: 2633733
Change-Id: I442d07de55813c930b77e7dfffcdebf5372c5c0e
In chipsets that support true 160MHz (single synthesizer),
the radar parameters received from target are different from Hawkeye
based chipsets in which two synthesizers, each 80Mhz,
produce 160Mhz signal.
The segment ID received in true 160MHz chipsets is always 0 and the
frequency offset is with respect to the center of 160MHz; unlike in
Hawkeye where segment IDs can be 0 (primary) or 1 (secondary) and
the frequency offset received is with respect to the corresponding
frequency centers (of the segment ID received).
Hence, to be able to use the same radar found algorithm as used in
Hawkeye, add a translation/mapping API that will translate new
parameters to old equivalents.
CRs-Fixed: 2633062
Change-Id: I37ad1db4ca71231119cf547abb9a8a70577cc6a4
In a future product, 160MHz mode of operation is acheived through
a single detector, unlike Hawkeye and its variants where 160MHz mode
is acheived using two 80MHz detectors.
Because of this change, the maximum segment ID is 0 in the new chipset,
whereas 1 in Hawkeye and its variants. Also the Agile detector ID
is 1 in the new chipset, 2 in Hawkeye and its variants.
In light of these changes, to identify the true 160MHz capability,
add a new API that checks the target type and returns true 160MHz
capability based on the target type. Also introduce a new dfs
variable that maintains the agile detector ID (based on the
true 160MHz capability).
In the future product, there is a support of restricted-80p80MHz
(a.k.a 165Mhz) where channels 132,136,140,144,149,153,157,161 are
available for operation as an 80p80Mhz channel.
Add a DFS API to check if this support is enabled.
CRs-Fixed: 2623964
Change-Id: If813e9d6fc649ce99c7780c04fbcb61acbd1af86
Populate RNR info during scan req instead of beacon
add/delete to avoid loop while holding scan db spin lock.
With loop spin lock can take more than 5ms, which can results
in asserts.
Change-Id: I4ba346b8dcbaf7da844f97195dbdd3003bdb234b
CRs-Fixed: 2640889
Current NOL conversion for dynamic mode switch is in such a way
that the NOL data is copied to the pdev ID entry for the targeted
mode. That is, the NOL data is split/merged before mode switch and
copied to a temporary structure before mode switch command is
sent to FW.
At this point, the target pdev's frequency range are still the old
values because of which, certain entries of the NOL data are missed.
Also in case of FW failures, the NOL entry cannot be added back
because they have been merged/split already.
To avoid the above, rearchitecture deinit and reinit NOL for
mode switch in such a way that the NOL data, as-it-is, is copied
before mode switch and is only split/merged after the frequency range
of the pdevs are properly mapped and the FW response is a success.
Change-Id: I4a073d1327ba182c40ced6089aa46d8f5f241d33
CRs-Fixed: 2632582
Fix the case where RNR list can be used uninitialized and
fixed the OOB memory write access in 6Ghz BSSID and SSID hints
in scan req.
Change-Id: Ifc6a5f65876cd3ace744031bf59a3640409b63da
CRs-Fixed: 2637039
Per requirement, if STA+SAP is working on same 5G DFS
channel and INI g_sta_sap_scc_on_dfs_chan = 2, the
SAP DFS master is temporarily disabled to skip radar event,
and it will follow STA's channel movement. So, skip the
radar event processing based on STA+SAP concurrency policy,
otherwise the SAP would be stopped by kernel because the
current home channel is marked "disabled" by regulatory
during processing of radar event.
Change-Id: I3f851fe694c0e127665732894306e20f5d1c93f4
CRs-Fixed: 2636200
Add support for WMI event to host to process
dynamically selected Muedca values and update
the mgmt frames with the new set of values.
Extract the params and store in Muedca_param
struct from control path, to be used for
updating mgmt frames.
Change-Id: I6cc7756d1a246ff994edef195f6191d280bc5c47
When regdb is non offload, it invokes ucfg_reg_program_default_cc
to initialize the default country code. Because the num_phy is not
initialized and the country code source cannot not initialize
properly in function reg_process_master_chan_list, 11d cannot be
triggered.
Solve the problem mentioned above by initializing num_phy in
reg_program_default_cc. Since it is non-offload, initialize
num_phy to 1.
CRs-Fixed: 2584347
Change-Id: Idaed2badc908c74bcbb9312368fed8cbb71ac69c
Both im_intfr_cnt and im_samp_cnt need to store for following
dcs event process, dcs_im_stats is a local variable, so both
im_intfr_cnt and im_samp_cnt value will be missing when function
wlan_dcs_wlan_interference_process return.
Fix is to define pointer p_dcs_im_stats for use.
Change-Id: I39622fbf0153271f27a03387ace4a270a912b6ff
CRs-Fixed: 2638316
For 6G band, only valid opclass_table is the global_op_class
as per the current specification. Therefore, if the band is 6G
set the opclass to global_op_class instead of the default class.
Change-Id: I43d1be8266aa80b11c446d84bc3d027cde8bebea
If reg offload is disabled, then ignore the processing of
WMI_REG_CHAN_LIST_CC_EVENTID in regulatory module.
Change-Id: I5da0cdf2c80357d03199fa367137cc236f4c3307
CRs-Fixed: 2625784
Add the API wlan_reg_get_band_cap_from_op_class to get the supported
band capability from an list of operating class as input.
Change-Id: I58dc0bbe7c5436b889c12ac2d68bd769a3c702cf
CRs-fixed: 2617526
Add wlan regulatory API reg_country_chan_opclass_to_freq
to calculate channel frequency given country, opclass and channel
number. The API gets channel frequency from country's operating
class table by opclass and channel number pair. If the driver
can not find the pair, then try to find the frequency (MHz) by
channel number only.
Change-Id: I6a23a53e2e53e0b7c81b36f9f5c7794e9749c734
CRs-Fixed: 2605920
Auto BW computes new bandwidth for adjacent regulatory rules. But this
combined bandwidth can be more than the bandwidth allowed for a
particular reg-domain. So relax the check for combined BW for
adjacent regulatory rules.
Change-Id: I1486988c114f0348f7228b91aeadc5c027c6a510
CRs-Fixed: 2626165
spin lock is called without init while peer attach
move spin-lock init before get ref
Change-Id: Ibf21ac6a7b06c62f2e64a2d89154b21183b9c472
CRs-Fixed: 2628750
Array strings of size 73 may use index value(s) 73..74
Adding dbg ids to strings same as wlan_objmgr_ref_dbgid
CRs-Fixed: 2632424
Change-Id: I8eac1c4f015d54c626c2e74891d8c86ccfb962e4
So far, only MKK4 and FCC DFS domains supported Chirp RADAR. But with new
Japan regulation, JP country which is mapped to MKKN DFS domain should
also detect the MKK4 DFS domain's Chirp RADAR.
Add Chirp RADAR detection support for MKKN DFS domain.
Change-Id: Iafd952d70726c9a9b85e73607d4a23c5022b8a46
CRs-Fixed: 2630894
For MCL side, WLAN_UMAC_MAX_PDEVS is always 1 from current design,
so it's wrong to use WLAN_UMAC_MAX_PDEVS define array dcs_pdev_priv,
since dcs_pdev_priv includes firmware indicated pdev dcs information,
define WLAN_DCS_MAX_PDEVS to 3 for dcs use, this will be compatible
for both MCL and WIN side.
Change-Id: I3bac35f561c49e9959645e85774662ff48d7903d
CRs-Fixed: 2627683
As softap, send assoc failure if HT supported client try to associate
as WEP/TKIP pairwise key.
Change-Id: Ie33e5d83ec18e10aae51a4cc3515f754bd24774e
CRs-Fixed: 2623660
Regulatory rules cannot have maximum bandwidth more than the
width of the rule. Fix this logic for six ghz regulatory rules.
Change-Id: Icbd4eb95d4de54acaef0aa635c293451ba4e1987
CRs-Fixed: 2620699
Handle minidump logging using dynamic
configurablity options. Data structures
to be logged in minidump can be configured
using internal INI file.
Change-Id: I99f12b3f98c4a9c0e15c3e5d611019e6b8d0909a
For FILS pmksa cache, the pmksa add/del/query is based on SSID
and cache id. The current crypto pmksa cache API dosn't support
SSID and cache ID.
1. Add SSID/Cache ID support to pmksa API
2. Add RSN IE pmkid field based on SSID/cache ID
Change-Id: I1577c6293b75d6f8e6210f314dd83462e06d8190
CRs-Fixed: 2621860
There is memory leak in get_station_stats_cb:
priv->vdev_summary_stats, priv->vdev_chain_rssi,
priv->peer_adv_stats. But the “request” is not leaked,
that means the “.dealloc” should be called.
The suspect is the get_station_stats_cb was called two
times with same cookie (request) before the "request"
was freed, that caused the priv->vdev_summary_stats
and the others two member of "priv" were overwritten,
and then memory leaks.
From the cp stats components there are multiple places
to call ucfg_mc_cp_stats_reset_pending_req to reset the
unused pending.req(has a cookie) to zero. The zero
cookie may be used in again.
Change the ucfg_mc_cp_stats_reset_pending_req API to do
atomic operation of "reset" and "get" last pending
request.
Change-Id: I5efb7efec4da1edc0aab33b940dc126012a3f12e
CRs-Fixed: 2622444
Add change to increase vdev id bitmap size to the number of vdev ids
bitmap as sent by the FW to avoid memory overflow on host.
Change-Id: I92a2ae31cf0079c989b1788afc61e7f3153dc426
CRs-Fixed: 2626887
Fix compilation error in reg_country_opclass_freq_check
return false when HOST_OPCLASS is disabled.
Change-Id: Ib03e544311ae0a6c3496711f303ad17d490900ba
CRs-Fixed: 2624546
