macros and fw cmn headers included in hal_internal.h is moved
to a new hal_hw_headers.h to avoid these getting included in hif
layer. Include the new hal_hw_headers.h file
Change-Id: I3390ae9e71ca561d94a265e1fdf4d9354e7b2474
Add cdp ops for timestamp setter/getter function for peer based on
mac address.
Change-Id: I7025fdd7540f47bb4d3f95ef6d9f2ef92af5f1f1
CRs-Fixed: 2275985
There are two instances where peer ref counting leak has been observed
1) When DUT-STA is connected to AP1 and if it tries to roam to AP2 or
to same AP1 then as part of roam sync indication, it needs to delete
the old peer and create the new peer. Deletion of old peer is
happening through force delete operation which is No-OP for some of
the platforms. In such cases, do normal peer delete operation, so
that peer ref count can be deleted properly.
2) When looking up peer by its associated vdev, driver goes one by one
all peers and check their associated vdev and compare with given
vdev. If it doesn't find the match then it returns without releasing
the reference count.
CRs-Fixed: 2263607
Change-Id: Ibcad72943258e531e29498961d3d7e692fd05b36
structures
Rename osif_pdev to ctrl_pdev and os_if_vdev to ctrl_vdev in dp_pdev and
osif_dev structures respectively which are
pointing to objmgr_pdev and objmgr_vdev structures to maintain
uniformity
Change-Id: Ida95a1a90ea74513573f00c652338baee3df897a
CRs-Fixed: 2241362
1. Add CDP API to set encryption key in datapath.
Used to perform RX TKIP demic.
2. Fixes to RX TKIP demic function.
Change-Id: Ia14caeb71a320b4746f4303cf6611f1b6e4947ae
CRs-Fixed: 2214749
Reset seq number during roaming key set. REO error 5 is seen
when expected seq number is higher than received seq number.
Change-Id: Ifa7be042479685ac52f571d0e94f3165b239db08
Peer's RX TID may already be added to defrag's waitlist when it is
removed. Then use-after-free occurs when waitlist be accessed later.
Remove current peer's entries from waitlist, before it is freed.
As waitlist may be accessed from two contexts, additional lock
introduced to protect waitlist.
CRs-Fixed: 2244566
Change-Id: I8f1935973372a81086e9dbd992ac771b6709a677
Address the following issues in the dp folder:
CHECK: 'availble' may be misspelled - perhaps 'available'?
CHECK: 'catagory' may be misspelled - perhaps 'category'?
CHECK: 'endianess' may be misspelled - perhaps 'endianness'?
CHECK: 'exceded' may be misspelled - perhaps 'exceeded'?
CHECK: 'explicitely' may be misspelled - perhaps 'explicitly'?
CHECK: 'Inteface' may be misspelled - perhaps 'Interface'?
CHECK: 'lengh' may be misspelled - perhaps 'length'?
CHECK: 'messsages' may be misspelled - perhaps 'messages'?
CHECK: 'miscelleneous' may be misspelled - perhaps 'miscellaneous'?
CHECK: 'Ouput' may be misspelled - perhaps 'Output'?
CHECK: 'poiter' may be misspelled - perhaps 'pointer'?
CHECK: 'Poiter' may be misspelled - perhaps 'Pointer'?
CHECK: 'psuedo' may be misspelled - perhaps 'pseudo'?
CHECK: 'registerd' may be misspelled - perhaps 'registered'?
CHECK: 'requred' may be misspelled - perhaps 'required'?
CHECK: 'retreive' may be misspelled - perhaps 'retrieve'?
CHECK: 'succesfully' may be misspelled - perhaps 'successfully'?
CHECK: 'vaild' may be misspelled - perhaps 'valid'?
CHECK: 'virtaul' may be misspelled - perhaps 'virtual'?
Change-Id: I66b9cdc6115dd133b385e60c9d02cefd1bd0bac3
CRs-Fixed: 2241574
Initialize the peer map and peer hash memory based on the config
received from target in service ready event
Change-Id: I8e1b62cd9586f5b2be7acb863a106d2486be1b35
CRs-Fixed: 2223428
Add option to ignore vdev_id match to peer hash lookup API
when vdev_id is passed as 0xff to the API, it ignores vdev_id
argument
This option is needed for usecases like peer level statistics
display where only MAC address is known and vdev_id is not known
Also add the missing accounting of rx broadcast frames in the
overall statistics
Change-Id: I9939ac8bf30f6be3d216f9aa28d52560bf445e06
Add support in DP WDS source port learning handler to kickout a STA,
when direct associated peer(SA) roams to another AP/Repeater and
reachable via TA peer
Change-Id: I84d0b92c9b4e39c05f4d7c25b3f5afb1d535ca02
CRs-Fixed: 2219924
For FTM mode we receive peer map events without
peer created. This change checks for peer NULL case
to access peer vdev.
Change-Id: I1998e33ca3d9338dba939dc760dcf7bfdb70d1e3
Crs-fixed: 2212203
At the time of peer map delete_in_progress can be set for newly
created peer in case host send sends the peer delete to FW before
we receive the peer map even from FW
Hence removing the assert to check delete_in_progress flag in
peer map
Change-Id: I28b2f46cf4fdd12bf98ce54dd7dcea68d96dc795
CRs-Fixed: 2216550
If peer with given MAC Address
already exists, just increment the refcnt
instead of allocating a new peer and deleting older
peer object. This avoids unnecessary memory fragmentation.
Change-Id: I76a3ffca4e907fccfdfd1b6857de721623f455d5
CRs-Fixed: 2209045
In API dp_peer_find_by_id return NULL if delete_in_progress
bit is set, this will avoid referencing peer memory which will
be free in peer_unmap event asynchronously.
Change-Id: Ieab559b9274a886809a9baa9bb348d348e924625
CRs-fixed: 2194265
Based on requirement from customer we have re-organised
AST specific and WDS specific code under different compile
time flags.
Change-Id: Icbb0dff7c2e7a2239d82c296468fa8d3e4f53021
Assign num_mpdu to mpdu_tried_mcast for mcast stats updation
Defer bss peer assigning till peer map event arrives
Do not set delete_in_progress for bss Peer
Change-Id: I0881ea3c8804990c336d97cb7b239a991ec64fa9
Remove ast entry from the previous peer ast_list and add it to the
new peer ast_list when ast_update is called
Change-Id: Ic6e628ec2c225e6743d042fe3f3e227cb1864a3c
Fix possible REO descriptor leak while draining REO
command ring by invoking command status handlers with
special error code.
Change-Id: I2fe5f60489b57a4b0a287e67e5610112f7292677
Return value on dp_peer_add_ast where not correct
resulting in unnecessary flooding of print.
Correct the return values for the AST APIs
Change-Id: I03983995e96314cae91db95fe02edda4564baa46
CRs-Fixed: 2183715
Change REO queue descriptor delete sequence to flush base and
extension descriptors separately, since flushing base descriptor
alone results in extensions flushed by HW much later,
sometimes after freeing descriptor memory, causing use-after-free
corruptions. Also increase REO command and status ring sizes
since number of commands per RX TID flush has increased with
this change.
Fix interrupt batch count setting for non pkt/buffer rings,
which includes REO status ring.
Also remove callbacks during reo command list destroy,
done as part of SOC detach. This should not be done since
callbacks will access stale data structures that are freed
as part of PDEV/SOC detach.
Change-Id: I4337454d3f53cc0b3c3014ef07cc2ba13cfebb18
CRs-Fixed: 2175989
Added CDP callback APIs so the DBDC repeater module
outside of cmn_dev can add, delete and update the AST
entries. Also with this change the sending of wds cmds
to fw is tied to adding AST, deleteing AST and updating
the AST entries.
Change-Id: I48d31962236860f50e16b771abaf3b8825b798df
pass psoc/pdev object as ctrl pointers to instead of legacy objects.
It introduces new APIs to get feature pointers of psoc/pdev.
DP attach API param modified to pass ctrl psoc (psoc object)
Change-Id: I3d83f28c3e72e5ee984a4220b9d5cf3c4522b501
CRs-Fixed: 2177109
REO queue setup is getting triggered from processing
pending null queue exceptions in WBM release ring, after
sending peer delete command to FW, but before peer unmap
is received, causing target assert. Mark peer deletion
before sending peer delete command to avoid this.
Change-Id: I2d85d01e049cb37d9321beeee8e41f44e40e68ad
CRs-Fixed: 2155420
Addba recieve/response logic has been implemented in
host for HE instead of in FW like VHT. setaddbaresp
is not hooked to the dp module yet to set the addba
response from userspace. Implement the required logic
for HE to support this command.
Change-Id: I49cceca299db06d41f2cafa690f5ba59e01f1f4a
CRs-fixed: 2163475
Adds stats for number of ADDBA, DELBA requests,
pn size and window size per tid.
Change-Id: Ib7e3a9b948439695afd9a952fe46ac42ac58c653
CRs-fixed: 2151863
During RX TID deletion, if FLUSH_CACHE REO cmd fail to be sent,
the required callback function won't be invoked, hence
local allocated REO desc and related TID queue desc will leak.
Do clean up when REO cmd failed to be sent.
CRs-Fixed: 2155929
Change-Id: I02ff4a2340ad32986c30b935a376924bb75edb67
There is a hard-coded AST type number used for DP path, which will
cause poor readability. Fix this problem by using a pre-defined
constant type value.
CRs-Fixed: 2142975
Change-Id: I3520970bf59ea7152a0851cfdc3b8e7943ddbc19
Send peer create to NSS only when peer map comes for connected peers.
When peer map comes for WDS peers only update WDS peer specific entries.
Change-Id: I32d785180bcd1dae2703d40b55f4536685f10439
There is a case when the multicast/broadcast frame gets loop backed
even before a MEC WDS entry gets added, in this case
the MEC check based on sa_is_valid will fail, hence added
another ast lookup check.
Also fix the ast entry iterator to use _safe option, since
we are deleting ast entries in the same iterations
Change-Id: I0567893783649d991c3623a61c60fbc63d1a24ef
Add support for monitoring receive traffic from WDS nodes and
aging out inactive WDS nodes
Change-Id: Iedea826832a5421714c00bccadc6e0dc4acd4c7e
CRs-Fixed: 2004658
Split stats prints since they are truncated to 512 bytes due recent changes in
QDF_TRACE. Also flush REO queue descriptor cache after fetching stats to help
dumping from memory (for debugging).
Change-Id: Ie1d00766bd452d32cbc7085e95b66fb11bb9893c
