Support a new capture_interval_mode: capture_count, where after
capture_count+1 number of frames, MAC stops channel capture and
waits for capture_interval duration before enabling again.
Add nob(capture_intervalmode_sel) to switch to capture_count or
capture_duration mode in wlanconfig application, where
capture_intervalmode_sel=0 indicates the old capture_durarion
mode where MAC stops channel capture after capture_duration
instead of capture_count. capture_intervalmode_sel=1 indicates
the capture_count mode.
Support MO marking: Current ENH CFR uses the existing MD/MO,
type/subtype filters to filterin the packets with programmed
type/subtype as either MD/MO. But for m_TARA it is also required
to consider the bw/nss/ta/ra setting. Therefore, it is possible
that not all the filtered-in PPDUs have channel capture and lead
to processing of packets which does not have captured data.
To overcome this issue, from QCN9000 onwards, MAC has MO marking
feature added for M_TARA filter mode, where MAC will consider
all TARA group configuration as filterin criteria & provides
an option to HOST to choose either filterin mode as FP or MO.
en_ta_ra_filter_in_as_fp is added to support MO marking.
Based on the discussion between HOST, FW & MAC teams, 0 is the
recommended & default setting for en_ta_ra_filter_in_as_fp.
Add nob to configure en_ta_ra_filter_in_as_fp but do not expose
to user.
Change-Id: I75cd3218fa4308afad21052e4535ef9b8e5a5869
This API is used to parse the cfr capture metadata received in HTT msg
HTT_T2H_MSG_TYPE_CFR_DUMP_COMPL_IND from firmware. It reads the cfr dumps
from host allocated mem chunks for CFR using offset index received in
HTT msg, populates the CFR dumps into streamfs and updates the read
index of memory chunks allocated for CFR during init.
Change-Id: I2f49e308c3659779b8da7ae1baaceb5bfa968b4e
CRs-Fixed: 2687062
Add the init and deinit CFR pdev api for adrastea target type.
cfr_adrastea_init_pdev api enables the CFR feature if both host and
firmware supports the feature, initialises the cfr pdev structure
and streamfs.
Also during allocation of memory requested by firmware, skip smaller
chunks memory allocation for CFR capture requested memory as firmware
expects contiguous memory.
Change-Id: Ib893dc8a845fea990a11e95e98d8a656f7df12ba
CRs-Fixed: 2687057
CFR component allocate 140 luts but some of platform use 48 of them,
which allocate huge memory at one time and waste memory in some
platform. In low memory case, it may be failed to alloc luts at one
time. So, allocate lut based on number of DBR entry and split memory
allocation.
Change-Id: Id49c3f9a0f81cfa6d639cb72b62bb377911f0e77
CRs-Fixed: 2679470
Retrieve the INI option to disable CFR and store the
same in pdev feature ext caps.
When CFR feature is disabled -
1. Skip pdev/peer cfr object allocations
2. Skip CFR SRNG allocations
3. Skip WMI registration for DBR and TX completion events
Change-Id: I5a7a6ae67d2c3a863b952e00e317c44a71e9fbc1
CRs-Fixed: 2671620
Add option to disable cfr for a pdev through INI.
Since INI is per psoc, bitmap is used to indicate
the set of PDEVs for which CFR needs to be disabled.
Change-Id: Iaff24295c8c3ec702647db24961395b8a7ecf8c4
CRs-Fixed: 2671620
Add a interface to write string of CFR stopping, and indicate to
userspace that CFR has stopped.
Change-Id: Ib1d63cb75cd311b367d5d8100c5c4eb92980392d
CRs-Fixed: 2659373
FW requires to receive WMI_CFR_CAPTURE_FILTER_CMDID with the pdev id
which is based on the working band. It requires srng id when looking
up or releasing DMA address. So add this change to check working band
and set mac id. This is MCL only change.
Change-Id: I763a25b4989607128b2b4c75186eb5bdcd204077
CRs-Fixed: 2641268
Add chip type for QCA6490, and CFR component will indicate chip type
to user space.
Change-Id: Ia3e95e06c8cc86bc30b81906f62f3821606a38f7
CRs-Fixed: 2659553
1. Remove absolute paths to cfr header file.
2. Exclusion of CFR header file is handled in Kbuild,
remove compile flag within file.
Change-Id: I6abdce56716ba17481ccc2e1942754203063e3ad
CRs-Fixed: 2649714
Protect access to cfr lookup table, since error handling
mechanism attempts to cleanup CFR entries in timer context,
this leads to contention between bottom-half and timer.
Change-Id: I32a095fc82545ab117ab43a81ef8a3a5602741fc
CRs-Fixed: 2649714
Since there are chip differences about channel frequency response. Add
files for QCA6490. This change also adds CFR configure file
Change-Id: Ib200affe4c68dac5535c4a3d65109072559161ff
CRs-Fixed: 2637134
Use qdf streamfs APIs to indicate data to user space. This is part of
moving CFR component to hostmn.
Change-Id: I2abc46fdfb36d24eef201ab21f5744d951595ea1
CRs-Fixed: 2637128
