Add BW_320MHz in mgmt_ch_width in host diag module.
Also remove WLAN_FEATURE_11BE feature flag within enum
mgmt_dot11_mode for 11BE related modes.
Change-Id: I2914735edd5aa21ad1d94b0e5fcf718b189fc432
CRs-Fixed: 3009301
hif_ext_group and soc->intr_ctx[i].lro_ctx are allocated
but not free while fail to register parts of ext_group in
hif_register_ext_group, which cause memory leak. Fix is
to detach according resource before return.
Change-Id: I03ecc37437d09bf9275f128b1f2b320124a7df64
CRs-Fixed: 2988891
Add change to support max channel switch IE as a INI config.
With this INI enabled, max channel switch IE will be used in scenario,
where client disconnection is to be avoided with CSA on CAC channel.
Change-Id: I786e7e12e12ebcb3fc7d0720ed02e01bff6c82b8
CRs-Fixed: 2949206
Instead of using a fixed sized array of cfis for every operating class row,
which occupies a large amount of unused memory for many operating class
rows, use a pointer to an array and the length of the array so that each
row uses only the right amount of the memory required.
Change-Id: Ifc9974b7dc7c71b2e51b2a93a8d5c08f4fa89dfc
CRs-Fixed: 3009346
The bridge forwards the multicast packets to all the
interfaces attached the bridge.
When the STA network interface receives such packets
from bridge and send it to the AP, it is echoed back
from the BSS.
These packets are not intended for the bridge as it
will lead to looping.
Add a check to detect and drop such packets when
received back from the BSS.
Change-Id: I5a4a2a3e015df2b9c78de405d7d917216baed051
CRs-Fixed: 2997189
Currently driver has only one name for an INI, with
this change add second name as well for few INIs based on
new requirement.
Change-Id: I67bd50652c3be7912c516b81d40f6a1ea7a7b90a
CRs-Fixed: 3007172
It is not right that linkstate_vote is 0 when entering
hif_vote_link_down, this indicates there is a mismatch
for vote up/down.
Enable debug to catch such case at first time.
Change-Id: I128bc42917ca5de949ee0d0b657579c14dd96eac
CRs-Fixed: 3009469
Avoid calling qdf_timer_mod after qdf_timer_stop as the
node is deleted after timer is stopped and qdf_timer_mod
dereferences the deleted node leading to data abort.
Replace 'qdf_timer_mod' by the sequence
'qdf_timer_sync_cancel, qdf_timer_start' to be SMP safe.
If a timer is being started for the first time, use only
'qdf_timer_start' and not the sequence
'qdf_timer_sync_cancel, qdf_timer_start'
Change-Id: Ida5440d4a54d49aa97f57fbda57ab1ef2cce16e6
CRs-Fixed: 3005699
Tx data transfer in host mode with nbuf map_unmap debug frmwk
enabled and enhanced stats disabled results in an assert.
This is because on Tx completion path, nbuf unmap is done using API
qdf_mem_unmap_nbytes_single which takes physical address of nbuf
for unmap and does not remove nbuf from map_unmap tracking list and
when nbuf is freed, it results in assert as the tracking list still
contains that nbuf entry.
In order to fix this, define a new API for nbuf unmap passing physical
and virtual address of nbuf as arguments. Physical address is passed
as an argument in order to avoid cache miss in per packet path which
eventually helps in improving the KPI.
Change-Id: I77ab6ac3ac98556b9caff8aa3ee82bc23cd26de7
CRs-Fixed: 3006671
Currently driver supports only one name for an ini parameter,
there is no aliasing support for ini names.
With this change add support for multiple ini names for the
same ini parameter.
Change-Id: Ib16a258975f5c3d152fa1dfbbdb6b3e6cc222784
CRs-Fixed: 3007156
Currently there is mismatch in time-stamp source for
hif_hist_skip_event_record with respect to hif_hist_record_event
Updating time-stamp source in hif_hist_record_event to match with
hif_hist_skip_event_record time-stamp source.
Change-Id: I55680c40860eafb5c6ed6117ab7c55bb38cc24bb
CRs-Fixed: 3000319
This patch adds the function dp_update_msdu_to_list to dp_mon_ops
struct. This is needed for supporting tx capture module in NSS
offload.
Change-Id: Id36aa6d1442eed4112585807e8798fc28ccdc424
Currently driver reset self OCV capability from RSN based
on AP capability which is not required as it may lead to
failure of wifi-cert test case 15.1 that is sta should
advertise self OCV capability irrespective of AP capability.
Fix is not to reset OCV from rsn based on AP
capability to support OCV.
Change-Id: I24cda586ae0f364bb4eb2936985194e01f74875b
CRs-Fixed: 3002963
-Add flag to inidicate special vap configuration
-Add frame type counters while processing tlv
WIFIRX_MPDU_START_E
-Add function to update special vap rx stats
-Add dp pdev param to enable/disable special vap
stats reset
-Add function to reset special vap stats
-Add fucntion to get special vap stats
-Add CDP function to retreive special vap stats
Change-Id: Ia5de6743e472dc86c9e66b9e789c909a57025e35
CRs-Fixed: 3005425
Use lb_edge_bins->start_bin_idx as the bin_pwr array start bin
index, when left band edge extra bins are present.
In all other cases, use the detector start bin index
detector_info->start_bin_idx.
CRs-Fixed: 3005949
Change-Id: Ic91c3eb386d693b3f929c687e269e882b6bd8f59
The per-session detector map is keyed by detector ID
from the Spectral FFT report and is only valid for one
session, ie. start scan to stop scan.
There is a possibility of receiving FFT report with
an invalid detector ID, for a particular session.
Due to this, invalid detector map information may get
accessed.
Verify that detector ID received in Spectral report is
valid for given spectral scan mode and channel width,
by checking the detector list.
Add a validity flag to the per_session_det_map, and check
whether detector map is valid for the detector ID used to
access it.
CRs-Fixed: 2998410
Change-Id: I1f38ae22b458bb1fea62b99422ec60095071b3c6
CE buffer size update to support 3.5k beacon template &
probe response on Pine and Spruce targets.
The support is disabled on low memory profiles including
512M as there is no skb recycler in these profiles.
Change-Id: I451f11d6a20d1246b3e16221f2fb7ebd234b284a
MLO sta needs mld mac and assoc link information to create bss peer
Get mld address and assoc link info from connection manager and pass
it to bss peer creation.
Change-Id: I147ac8365f3c99c6231df589ac17d39122d57362
CRs-Fixed: 2987496
Write two new functions to check if preCAC and RCAC are supported in the
current DFS domain.
Currently, the preCAC is supported in the following DFS domains:
1. ETSI Domain
Currently, the RCAC is supported in the following DFS domains:
1. FCC Domain
2. MKK Domain
3. MKKN Domain
Change-Id: I2996e4d5b26e1a57ebb00e415fa41108af997b21
CRs-Fixed: 3005416
Currently in function wmi_extract_dbr_buf_release_entry,
num_buf_release_entry & num_meta_data_entry are copied
to direct_buf_rx_rsp structure without any validation which
may cause out of bound issue if num_buf_release_entry or
num_meta_data_entries provided in fixed param becomes greater
than actual number of entries.
Fix is to validate num_entries and num_meta_data before populating
param->num_buf_release_entry and param->num_meta_data_entry.
Change-Id: I18050fd4f90f8815d7eceb5f715fdbaa09130d3a
CRs-Fixed: 3000875
Disable CP Stats for Beryllium emulation environment. These stats are
invoked heavily by userspace and need to be retrieved from the FW.The
userpace is holding the rtnl_lock while invoking these stats. This
prevents any additional commands to be sent while a stats command is
pending. Since in emulation environment, the turnaround time is quite
high, no iwpriv/ifconfig/iw command can be sent while the CP stats are
pending, making the driver in accessible from command line.
Hence, disable CP stats by simply returning 0 to the caller in emulation
environment.
CRs-Fixed: 2984362
Change-Id: I80aee6ce2bed1c37b964dd5e7194a66287301355
The following configurations are changed
- Change numer of WBM2SWRELEASE rings from 7 to 8
- Use configurable RBM value when enqueuing packets for TX. This is needed
since WBM release ring numbers do not have an easy mapping to RBM values
for HMT1.0.
Change-Id: Idcf9e48e00b7039331fc1837bb1e900b12f19eb3
CRs-Fixed: 2984362
In HMT, pktlog, which uses CE5 traditionally is disabled. Hence donot
configure any entries in target_ce_config.
Change-Id: I31a075fb9c6557599688408ba9452704c7522ec0
CRs-Fixed: 2984362
In dp_service_srngs, the current logic assumes that WBM2SWRELEASE ring
number as obtained from interrupt_ctx->tx_mask matches the index of
soc->tx_comp[] array. However this may not be true, esp for HMT.
Add logic to fix the same.
Use a separate macro to enable use of single TX ring.
Change-Id: I1bee27b800ad4e4ab1a1fe5e2b01b5b43acfe1f7
CRs-Fixed: 2984362
Add length sanity check for ibf cal value & phase delta
to ensure HOST always align with target defined length.
Also remove the REPORT_AOA_FOR_RCC flag usage.
Change-Id: I06e4a430143df1534849b8ec974e38932cff3ef1
CRs-Fixed: 2997030
Change Ia0676c03cef9c7b010762326e535477beefe36ac added a few extra space.
Remove them.
Change-Id: I5780e3a377c0f4272d6b377015ec80449cfc4f5a
CRs-Fixed: 3005569
In change Ia98b97f4cfe47dcd94bfa54f3dd7be13c8696532, the function
'reg_psd_2_eirp' is defined twice:
1)when WLAN_FEATURE_11BE defined
2)when WLAN_FEATURE_11BE is not defined.
However, both the functions are same except that (2) has the following
statement of 3 lines(marked by lines beginning with '>>'):
>>case BW_320_MHZ:
>>ten_log_bw = 25; /* 10* 2.50514 = 25.0514 */
>>break;
and (1) does not have the 3 lines.
Both the functions require identical updates for their the common part.
However, it is very likely to miss updating one function and update
the other function. Or do different updates for the common part.
Similarly for the non-common part, the function that does not need the
non-common part also may get updated. Therefore, having multiple
identical function bodies for the same function under conditional
compilation is not a good design choice.
Convert the mapping (psd+bw -> eirp) done through 'switch case' into a
linear search through a lookup table. Refactor the code so that there
is only one function body and the non-common part moves to the lookup
table under the conditional compilation.
Change-Id: Ic2c6e7dff5a2fed9d1c6624b042d2be023cafcfc
CRs-Fixed: 3005569
Add assoc_peer field in struct wlan_objmgr_peer_mlme.
Provide API to set/get mldmac of peer
Provide API to set/get assoc_peer of peer
Change-Id: If3e84ea6512ab45a53d616e52b64ebcea08ddda6
CRs-Fixed: 2987463
Add pdev data structure definitions for MGMT Rx REO module.
Add a pointer to an object of that type inside the pdev
context of MGMT_TXRX component.
Change-Id: I5214be24d776d8d1c14b3b81c89c0c0fde2654b7
CRs-Fixed: 2959074
Add new field ema_init_config to signal the configured value of
beacon size while using MBSSID feature in 6Ghz.
The current allowed range is 1500-3500 bytes.
CRs-fixed: 3004041
Change-Id: Id8cc1b7e4602b2e52b8eb215337070c6e3c26089
