Any update to the SRNG TP/HP when the device is in low power
state would result in system errors. It is recommended to disable
EXT grp irqs and drain TXRX before sending power save enter command
to the FW. This will ensure that no interrupts are received while
in power save mode and as a result there wont be any HP/TP updates.
Change-Id: Ibf952bbc2c6d13fb3e4ca6b4845bc9cc887fa694
CRs-Fixed: 2883135
sequence number populated from tlv are incorrect for some frames.
Firmware populate correct sequence number for management and control
frame either in payload or tlv itself.
added field to get valid sequence number.
Change-Id: I21b1c34c0d66cb46c3a0baaaa231c952de065534
added new WDI event index for tx capture, share same index cause
corruption when switching different feature without delay.
Change-Id: I9e7a849968544957491891629eb42974c8b65728
Add and initialize a preallocated pool of buffers which can
be used to replenish RX buffers. During replenish, the buffers
from the pool are used instead of allocating/mapping a new buffer
in the softirq context. This preallocated pool will be refilled
in thread context.
Change-Id: Idf3bd7d25c5d57ddba105ccd8fab672c26a184f1
CRs-Fixed: 2869345
Use macros like dp_cdp_debug, dp_cdp_err, dp_cdp_info to
print logs for QDF_MODULE_ID_CDP
Change-Id: I550eefa82c3417b8bf83378d4a9c6f382098fea6
CRs-Fixed: 2855937
This change will set up monitor mode status and destination ring
filters for enbale CBF logging and will enable destination ring to
capture CBF frame. This change will get the CBF frame from the
destination ring and send it to the pktlog module for post processing
through WDI event. CBF is a compressed beamforming report.
Change-Id: I4cc419440ba8d60446dd1f01747340a89f023171
In security mode, allow only EAPOL frames in receive path
when peer is not authorized. This feature is enabled per VAP
based on vdev flag and will be applicable for all peers in that
VAP
Change-Id: Ic5dea09c2083f31e8cd301a0cdc3565f247b735c
Add CDP API to dump the SW head pointer and tail pointer
of a few important srngs. This can be used to debug or
get a direction when the device doesn't dump ram info.
dp_print_ring_stat_from_hal is not being used, since without
device force wake recipe in place, reading hardware hp/tp
value can lead to NOC errors.
Change-Id: Ib0381acb007f1b4431f6a02cd9762e461d6393e8
CRs-Fixed: 2826084
Add cfg_dp_sg_enable to get ini key dp_sg_support by cdp_cfg_get.
And add some comments for CFG_DP_SG to clarify more.
Change-Id: I34de242eacbdcf55398afe64b91f5534f205fa22
CRs-Fixed: 2822536
Add the flag "is_exception", to indicate that the
packets belonging to this flow are not to be aggregated
by FISA.
Change-Id: I3c1e781d4a2ad251082dacc189f23ffab15ae002
CRs-Fixed: 2810360
Add a ini control field to control rx frame pending check
logic in WoW case. In some cases, power consumption is more
important than rx frame ping loss, so add a control flag
Change-Id: I8c4d3725edddb82a0f06dc70c22a8dd5243209f2
CRs-Fixed: 2806786
In dp_mon_status_srng_drop_for_mac, the rx_desc pool
used for status ring is dest ring desc pool which is
not the appropriate one.
Fix is to use the appropriate desc pool for mon status
ring.
Change-Id: I6f178354789212b375a7a541366bef590a925568
CRs-Fixed: 2800658
In monitor mode, if channel is initially configured from 5G
band and then moved to channel from 2G band, packets are still
received on MAC-0 RXDMA2SW ring since IMPS is disabled for both
MACs. Since driver reaps only MAC-1 RXDMA2SW ring, ring full
condition is hit for the MAC-0 ring causing ring backpressure.
Fix is to drop packets received on the non-monitoring MAC
ring.
Change-Id: I49cb276827f4a06791183ee3fe8c88ba84df085d
CRs-Fixed: 2791341
A htt message arrived after ipa context is freed as part of
deinitialization which was dereferenced by event handler
assigned to pdev->ipa_uc_op_cb, resulting in crash.
To fix this, during deinit pdev->ipa_uc_op_cb is deregistered
and assigned NULL before freeing up ipa context.
Change-Id: I8125cb104a538e88cda93960f7443129fabd850a
CRs-Fixed: 2793295
Add a new cdp datapath ops - mscs_ops for Mirrored
stream classification signalling feature. This function
will be invoked from ECM flow acceleration manager
Change-Id: I749623846395057b6ea8328c881efa8733700b0e
Use AST override feature to send out multicast packet in
4 address format. Pass per packet peer_id from osif layer.
Change-Id: Ic86120169c89e7972caa3cc8c967de72670314d0
CRs-Fixed: 2775051
1. Register peer->osif_peer for per-STA netdevice delivery.
2. Wi-Fi 3-address frame packets received would be processed
through AP netdevice.
3. Wi-Fi 4-address frame packets received would be processed
through per-STA netdevice.
Change-Id: I102874ea1de9fba40ab7f0e2c32c9de1c9b4d075
While preparing raw packets for transmission, the count
of nbuf belonging to one mpdu must be less than the
number of segments.This makes sure the frags array inside
seg_info does not go out of bounds.
Change-Id: I7fffba7f64da274aa73c558cfc63d90f4419a04d
Firmware advertizes its support to place FST in CMEM,
export this capability to DP.
Change-Id: I265246bcfd38a36e34c4ede66e117a92bb185032
CRs-Fixed: 2772238
Drop frame if it is not for the vap, to which
client is connected.
Enable this check only for ap.
Change-Id: I33d7eb79267490bdb8697e4e45f789e9f6279f0e
CRs-Fixed: 2756304
During driver initialization, IPA TX and RX doorbell registers
are provided to wlan as physical addresses. With SMMU S1 enabled,
they're mapped to IOVA of wlan domain.
On driver deinit path, do smmu unmap for the two IOVA addresses.
Change-Id: I85ef1c3e99bef504abf09eebf9ace760b68f35f1
CRs-Fixed: 2768303
- Added data structure for wds ext peer
- Enhanced DP peer structure to maintain
wds ext peer data structure, which inturn
maintain pointer to osif device.
- Enhanced DP vdev structure to maintain feature
configuration, which will be updated during vdev
creation when feature is flag is set at control
psoc.
- Enhanced cdp_vdev_param_type and cdp_config_param_t
to set wds ext configuration into DP vdev
- Enhanced cdp_cmn_ops structure and corresponding
call back definitons to get peer id, which will
be saved in osif private structure and to set
wds ext peer rx.
- Enhanced cdp_ctrl_ops to send event to control
path when 1st 4 address frame is received from
backhaul.
Change-Id: Ide0ea54e7b2d480ad646fb84b6e4e3108930f986
CRs-Fixed: 2773492
The 11g and 11a connections are latency critical and
hence the tx coalescing cannot be applied on traffic
running for these connections.
Add a CDP API to save the number of low latency
connection in the dtapath vdev handle. The Software
latency manager can use this information to decide
and skip the tx register write coalescing for packet
transmission on low latency connections.
Change-Id: Iff51867447e9d4537a3637cb65d94e184e4249ef
CRs-Fixed: 2769025
1. Add flag to support hlos id override feature in dp vdev
2. Update tid from nbuf->priority in dp_tx_send
3. Update tid to nbuf->priority in dp_rx_process
Change-Id: I66e8d77733a667f3f60b77e0d7bb444f7c5ad93d
peer wlanstats context is used only for RDK Plume stats
but the name is misleading as wlan statistics
Hence rename peer's wlanstats_ctx to rdkstats_ctx and
the APIs the APIs around the same
CRs-Fixed: 2767192
Change-Id: I9e8955554b94fa29a3964fed729a95a4db67c8f6
Register IPA ready callback with IPA driver. The callback
sets ipa_is_ready flag in the host driver and kick starts
the ipa init sequence as part of which the Tx buffers are
mapped to IPA.
None of the IPA APIs are invoked until IPA ready registration
is complete.
Change-Id: I6570b2b347052164a274fbc22358ebf0719dcabf
CRs-Fixed: 2735107
Add logic to pre-allocate DP consistent memory and reuse later
on wifi on/off. This prevents memory fragmentation.
Change-Id: I1e5eb0da39950a5d028dd46d38ff715f283e53ff
CRs-Fixed: 2740889
